| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <arch/io.h> |
| #include <device/mmio.h> |
| #include <device/pci_ops.h> |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <option.h> |
| #include <types.h> |
| |
| #include "chip.h" |
| #include "i82801ix.h" |
| |
| typedef struct southbridge_intel_i82801ix_config config_t; |
| |
| static void sata_enable_ahci_mmap(struct device *const dev, const u8 port_map, |
| const int is_mobile) |
| { |
| int i; |
| u32 reg32; |
| struct resource *res; |
| |
| /* Initialize AHCI memory-mapped space */ |
| res = probe_resource(dev, PCI_BASE_ADDRESS_5); |
| if (!res) |
| return; |
| |
| u8 *abar = res2mmio(res, 0, 0); |
| printk(BIOS_DEBUG, "ABAR: %p\n", abar); |
| |
| /* Set AHCI access mode. |
| No other ABAR registers should be accessed before this. */ |
| reg32 = read32(abar + 0x04); |
| reg32 |= 1 << 31; |
| write32(abar + 0x04, reg32); |
| |
| /* CAP (HBA Capabilities) : enable power management */ |
| reg32 = read32(abar + 0x00); |
| /* CCCS must be set. */ |
| reg32 |= 0x0c006080; /* set CCCS+PSC+SSC+SALP+SSS */ |
| reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */ |
| write32(abar + 0x00, reg32); |
| |
| /* PI (Ports implemented) */ |
| write32(abar + 0x0c, port_map); |
| /* PCH code reads back twice, do we need it, too? */ |
| (void)read32(abar + 0x0c); /* Read back 1 */ |
| (void)read32(abar + 0x0c); /* Read back 2 */ |
| |
| /* VSP (Vendor Specific Register) */ |
| reg32 = read32(abar + 0xa0); |
| reg32 &= ~0x00000001; /* clear SLPD */ |
| write32(abar + 0xa0, reg32); |
| |
| /* Lock R/WO bits in Port command registers. */ |
| for (i = 0; i < 6; ++i) { |
| if (((i == 2) || (i == 3)) && is_mobile) |
| continue; |
| u8 *addr = abar + 0x118 + (i * 0x80); |
| write32(addr, read32(addr)); |
| } |
| } |
| |
| static void sata_program_indexed(struct device *const dev, const int is_mobile) |
| { |
| u32 reg32; |
| |
| pci_write_config8(dev, D31F2_SIDX, 0x18); |
| reg32 = pci_read_config32(dev, D31F2_SDAT); |
| reg32 &= ~((7 << 6) | (7 << 3) | (7 << 0)); |
| reg32 |= (3 << 3) | (3 << 0); |
| pci_write_config32(dev, D31F2_SDAT, reg32); |
| |
| pci_write_config8(dev, D31F2_SIDX, 0x28); |
| pci_write_config32(dev, D31F2_SDAT, 0x00cc2080); |
| |
| pci_write_config8(dev, D31F2_SIDX, 0x40); |
| pci_write_config8(dev, D31F2_SDAT + 2, 0x22); |
| |
| pci_write_config8(dev, D31F2_SIDX, 0x78); |
| pci_write_config8(dev, D31F2_SDAT + 2, 0x22); |
| |
| if (!is_mobile) { |
| pci_write_config8(dev, D31F2_SIDX, 0x84); |
| reg32 = pci_read_config32(dev, D31F2_SDAT); |
| reg32 &= ~((7 << 3) | (7 << 0)); |
| reg32 |= (3 << 3) | (3 << 0); |
| pci_write_config32(dev, D31F2_SDAT, reg32); |
| } |
| |
| pci_write_config8(dev, D31F2_SIDX, 0x88); |
| reg32 = pci_read_config32(dev, D31F2_SDAT); |
| if (!is_mobile) |
| reg32 &= ~((7 << 27) | (7 << 24) | (7 << 11) | (7 << 8)); |
| reg32 &= ~((7 << 19) | (7 << 16) | (7 << 3) | (7 << 0)); |
| if (!is_mobile) |
| reg32 |= (4 << 27) | (4 << 24) | (2 << 11) | (2 << 8); |
| reg32 |= (4 << 19) | (4 << 16) | (2 << 3) | (2 << 0); |
| pci_write_config32(dev, D31F2_SDAT, reg32); |
| |
| pci_write_config8(dev, D31F2_SIDX, 0x8c); |
| reg32 = pci_read_config32(dev, D31F2_SDAT); |
| if (!is_mobile) |
| reg32 &= ~((7 << 27) | (7 << 24)); |
| reg32 &= ~((7 << 19) | (7 << 16) | 0xffff); |
| if (!is_mobile) |
| reg32 |= (2 << 27) | (2 << 24); |
| reg32 |= (2 << 19) | (2 << 16) | 0x00aa; |
| pci_write_config32(dev, D31F2_SDAT, reg32); |
| |
| pci_write_config8(dev, D31F2_SIDX, 0x94); |
| pci_write_config32(dev, D31F2_SDAT, 0x00000022); |
| |
| pci_write_config8(dev, D31F2_SIDX, 0xa0); |
| reg32 = pci_read_config32(dev, D31F2_SDAT); |
| reg32 &= ~((7 << 3) | (7 << 0)); |
| reg32 |= (3 << 3) | (3 << 0); |
| pci_write_config32(dev, D31F2_SDAT, reg32); |
| |
| pci_write_config8(dev, D31F2_SIDX, 0xa8); |
| reg32 = pci_read_config32(dev, D31F2_SDAT); |
| reg32 &= ~((7 << 19) | (7 << 16) | (7 << 3) | (7 << 0)); |
| reg32 |= (4 << 19) | (4 << 16) | (2 << 3) | (2 << 0); |
| pci_write_config32(dev, D31F2_SDAT, reg32); |
| |
| pci_write_config8(dev, D31F2_SIDX, 0xac); |
| reg32 = pci_read_config32(dev, D31F2_SDAT); |
| reg32 &= ~((7 << 19) | (7 << 16) | 0xffff); |
| reg32 |= (2 << 19) | (2 << 16) | 0x000a; |
| pci_write_config32(dev, D31F2_SDAT, reg32); |
| } |
| |
| static void sata_init(struct device *const dev) |
| { |
| u16 reg16; |
| |
| /* Get the chip configuration */ |
| const config_t *const config = dev->chip_info; |
| |
| const u16 devid = pci_read_config16(dev, PCI_DEVICE_ID); |
| const int is_mobile = (devid == PCI_DID_INTEL_82801IBM_IEM_SATA_IDE_P01) || |
| (devid == PCI_DID_INTEL_82801IBM_IEM_SATA_AHCI_P0145); |
| |
| printk(BIOS_DEBUG, "i82801ix_sata: initializing...\n"); |
| |
| if (config == NULL) { |
| printk(BIOS_ERR, "i82801ix_sata: error: " |
| "device not in devicetree.cb!\n"); |
| return; |
| } |
| |
| /* Default to AHCI */ |
| u8 sata_mode = get_uint_option("sata_mode", 0); |
| |
| /* |
| * TODO: In contrast to ICH7 and PCH code we don't set |
| * timings, dma and IDE-I/O settings here. Looks like they |
| * became obsolete with the fading of real IDE ports. |
| * Maybe we can safely remove those settings from PCH code and |
| * even ICH7 code if it doesn't use the feature to combine the |
| * IDE and SATA controllers. |
| */ |
| |
| pci_write_config16(dev, PCI_COMMAND, |
| PCI_COMMAND_MASTER | |
| PCI_COMMAND_MEMORY | /* read-only in IDE modes */ |
| PCI_COMMAND_IO); |
| if (sata_mode != 0) |
| /* No AHCI: clear AHCI base */ |
| pci_write_config32(dev, PCI_BASE_ADDRESS_5, 0x00000000); |
| |
| if (sata_mode == 0) { |
| printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n"); |
| } else { |
| printk(BIOS_DEBUG, "SATA controller in native mode.\n"); |
| |
| /* Enable native mode on both primary and secondary. */ |
| pci_write_config8(dev, PCI_CLASS_PROG, 0x8f); |
| } |
| |
| /* Looks like we should only enable decoding here. */ |
| pci_write_config16(dev, D31F2_IDE_TIM_PRI, (1 << 15)); |
| pci_write_config16(dev, D31F2_IDE_TIM_SEC, (1 << 15)); |
| |
| /* Port enable. For AHCI, it's managed in memory mapped space. */ |
| reg16 = pci_read_config16(dev, 0x92); |
| reg16 &= ~0x3f; |
| reg16 |= (1 << 15) | ((sata_mode == 0) ? 0x3f : config->sata_port_map); |
| pci_write_config16(dev, 0x92, reg16); |
| |
| /* SATA clock settings */ |
| u32 sclkcg = 0; |
| if (config->sata_clock_request && |
| !(inb(DEFAULT_GPIOBASE + 0x30) & (1 << (35 - 32)))) |
| sclkcg |= 1 << 30; /* Enable SATA clock request. */ |
| /* Disable unused ports. */ |
| sclkcg |= ((~config->sata_port_map) & 0x3f) << 24; |
| /* Must be programmed. */ |
| sclkcg |= 0x193; |
| pci_write_config32(dev, 0x94, sclkcg); |
| |
| if (is_mobile && config->sata_traffic_monitor) { |
| struct device *const lpc_dev = pcidev_on_root(0x1f, 0); |
| if (((pci_read_config8(lpc_dev, D31F0_CxSTATE_CNF) >> 3) & 3) == 3) { |
| u8 reg8 = pci_read_config8(dev, 0x9c); |
| reg8 &= ~(0x1f << 2); |
| reg8 |= 3 << 2; |
| pci_write_config8(dev, 0x9c, reg8); |
| } |
| } |
| |
| if (sata_mode == 0) |
| sata_enable_ahci_mmap(dev, config->sata_port_map, is_mobile); |
| |
| sata_program_indexed(dev, is_mobile); |
| } |
| |
| static void sata_enable(struct device *dev) |
| { |
| /* Get the chip configuration */ |
| const config_t *const config = dev->chip_info; |
| |
| u16 map = 0; |
| |
| if (!config) |
| return; |
| |
| u8 sata_mode = get_uint_option("sata_mode", 0); |
| |
| /* |
| * Set SATA controller mode early so the resource allocator can |
| * properly assign IO/Memory resources for the controller. |
| */ |
| if (sata_mode == 0) |
| map = 0x0040 | 0x0020; /* SATA mode + all ports on D31:F2 */ |
| |
| map |= (config->sata_port_map ^ 0x3f) << 8; |
| |
| pci_write_config16(dev, 0x90, map); |
| } |
| |
| static struct device_operations sata_ops = { |
| .read_resources = pci_dev_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .init = sata_init, |
| .enable = sata_enable, |
| .ops_pci = &pci_dev_ops_pci, |
| }; |
| |
| static const unsigned short pci_device_ids[] = { |
| PCI_DID_INTEL_82801IB_SATA_P0123, |
| PCI_DID_INTEL_82801IB_SATA_P01, |
| PCI_DID_INTEL_82801IB_SATA_AHCI1, |
| PCI_DID_INTEL_82801IB_SATA_AHCI2, |
| PCI_DID_INTEL_82801IBM_IEM_SATA_IDE_P01, |
| PCI_DID_INTEL_82801IBM_IEM_SATA_AHCI_P0145, |
| 0, |
| }; |
| |
| static const struct pci_driver pch_sata __pci_driver = { |
| .ops = &sata_ops, |
| .vendor = PCI_VID_INTEL, |
| .devices = pci_device_ids, |
| }; |