| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Google Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/console.h> |
| #include <string.h> |
| #include <arch/io.h> |
| #include <cbmem.h> |
| #include <device/pci_def.h> |
| #include "raminit.h" |
| #include "northbridge.h" |
| |
| static const char* ecc_decoder[] = { |
| "inactive", |
| "active on IO", |
| "disabled on IO", |
| "active" |
| }; |
| |
| /* |
| * Dump in the log memory controller configuration as read from the memory |
| * controller registers. |
| */ |
| void report_memory_config(void) |
| { |
| u32 addr_decoder_common, addr_decode_ch[2]; |
| int i; |
| |
| addr_decoder_common = MCHBAR32(0x5000); |
| addr_decode_ch[0] = MCHBAR32(0x5004); |
| addr_decode_ch[1] = MCHBAR32(0x5008); |
| |
| printk(BIOS_DEBUG, "memcfg DDR3 clock %d MHz\n", |
| (MCHBAR32(0x5e04) * 13333 * 2 + 50)/100); |
| printk(BIOS_DEBUG, "memcfg channel assignment: A: %d, B % d, C % d\n", |
| addr_decoder_common & 3, |
| (addr_decoder_common >> 2) & 3, |
| (addr_decoder_common >> 4) & 3); |
| |
| for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { |
| u32 ch_conf = addr_decode_ch[i]; |
| printk(BIOS_DEBUG, "memcfg channel[%d] config (%8.8x):\n", |
| i, ch_conf); |
| printk(BIOS_DEBUG, " ECC %s\n", |
| ecc_decoder[(ch_conf >> 24) & 3]); |
| printk(BIOS_DEBUG, " enhanced interleave mode %s\n", |
| ((ch_conf >> 22) & 1) ? "on" : "off"); |
| printk(BIOS_DEBUG, " rank interleave %s\n", |
| ((ch_conf >> 21) & 1) ? "on" : "off"); |
| printk(BIOS_DEBUG, " DIMMA %d MB width x%d %s rank%s\n", |
| ((ch_conf >> 0) & 0xff) * 256, |
| ((ch_conf >> 19) & 1) ? 16 : 8, |
| ((ch_conf >> 17) & 1) ? "dual" : "single", |
| ((ch_conf >> 16) & 1) ? "" : ", selected"); |
| printk(BIOS_DEBUG, " DIMMB %d MB width x%d %s rank%s\n", |
| ((ch_conf >> 8) & 0xff) * 256, |
| ((ch_conf >> 20) & 1) ? 16 : 8, |
| ((ch_conf >> 18) & 1) ? "dual" : "single", |
| ((ch_conf >> 16) & 1) ? ", selected" : ""); |
| } |
| } |