| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef _COREBOOT_SRC_MAINBOARD_GOOGLE_TROGDOR_BOARD_H_ |
| #define _COREBOOT_SRC_MAINBOARD_GOOGLE_TROGDOR_BOARD_H_ |
| |
| #include <assert.h> |
| #include <boardid.h> |
| #include <gpio.h> |
| #include <soc/gpio.h> |
| |
| #define GPIO_EC_IN_RW GPIO(118) |
| #define GPIO_AP_EC_INT GPIO(94) |
| #define GPIO_H1_AP_INT (CONFIG(TROGDOR_REV0) ? GPIO(21) : GPIO(42)) |
| #define GPIO_SD_CD_L GPIO(69) |
| #define GPIO_AMP_ENABLE GPIO(23) |
| |
| /* Display specific GPIOS */ |
| #define GPIO_BACKLIGHT_ENABLE GPIO(12) |
| |
| /* MIPI panel specific GPIOs. Only for mipi_panel-enabled devices (e.g. Mrbland). */ |
| #if CONFIG(TROGDOR_HAS_MIPI_PANEL) |
| #define GPIO_MIPI_1V8_ENABLE GPIO(86) |
| #define GPIO_AVDD_LCD_ENABLE GPIO(88) |
| #define GPIO_AVEE_LCD_ENABLE GPIO(21) |
| #define GPIO_VDD_RESET_1V8 GPIO(87) |
| #define GPIO_TP_EN (CONFIG(BOARD_GOOGLE_QUACKINGSTICK) ? GPIO(67) : GPIO(85)) |
| #define GPIO_EDP_BRIDGE_ENABLE dead_code_t(gpio_t) |
| #define GPIO_EN_PP3300_DX_EDP dead_code_t(gpio_t) |
| #define GPIO_PS8640_EDP_BRIDGE_PD_L dead_code_t(gpio_t) |
| #define GPIO_PS8640_EDP_BRIDGE_RST_L dead_code_t(gpio_t) |
| #define GPIO_PS8640_EDP_BRIDGE_3V3_ENABLE dead_code_t(gpio_t) |
| #else |
| #define GPIO_MIPI_1V8_ENABLE dead_code_t(gpio_t) |
| #define GPIO_AVDD_LCD_ENABLE dead_code_t(gpio_t) |
| #define GPIO_AVEE_LCD_ENABLE dead_code_t(gpio_t) |
| #define GPIO_VDD_RESET_1V8 dead_code_t(gpio_t) |
| #define GPIO_TP_EN dead_code_t(gpio_t) |
| #define GPIO_EDP_BRIDGE_ENABLE (CONFIG(TROGDOR_REV0) ? GPIO(14) : GPIO(104)) |
| #define GPIO_EN_PP3300_DX_EDP (CONFIG(TROGDOR_REV0) ? GPIO(106) : \ |
| (CONFIG(BOARD_GOOGLE_TROGDOR) && board_id() == 1 ? GPIO(30) : \ |
| (CONFIG(BOARD_GOOGLE_COACHZ) && board_id() == 0 ? GPIO(52) : \ |
| (CONFIG(BOARD_GOOGLE_LAZOR) || CONFIG(BOARD_GOOGLE_POMPOM) ? GPIO(30) : \ |
| GPIO(67))))) |
| /*PS8640 specific GPIOs */ |
| #define GPIO_PS8640_EDP_BRIDGE_PD_L GPIO_EDP_BRIDGE_ENABLE |
| #define GPIO_PS8640_EDP_BRIDGE_RST_L GPIO(11) |
| #define GPIO_PS8640_EDP_BRIDGE_3V3_ENABLE GPIO(32) |
| #endif |
| |
| /* Fingerprint-specific GPIOs. Only for fingerprint-enabled devices (e.g. CoachZ). */ |
| #if CONFIG(TROGDOR_HAS_FINGERPRINT) |
| #define GPIO_FPMCU_BOOT0 GPIO(10) |
| #define GPIO_FP_RST_L GPIO(22) |
| #define GPIO_EN_FP_RAILS GPIO(74) |
| #else |
| #define GPIO_FPMCU_BOOT0 dead_code_t(gpio_t) |
| #define GPIO_FP_RST_L dead_code_t(gpio_t) |
| #define GPIO_EN_FP_RAILS dead_code_t(gpio_t) |
| #endif |
| |
| void setup_chromeos_gpios(void); |
| |
| #endif /* _COREBOOT_SRC_MAINBOARD_GOOGLE_TROGDOR_BOARD_H_ */ |