| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include "agesawrapper.h" |
| #include "amdlib.h" |
| #include "BiosCallOuts.h" |
| #include "heapManager.h" |
| #include <northbridge/amd/agesa/family14/dimmSpd.h> |
| |
| /* Should AGESA_GNB_PCIE_SLOT_RESET use agesa_NoopSuccess? |
| * |
| * Dedicated reset is not needed for the on-board Intel I210 GbE controller. |
| */ |
| |
| STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] = |
| { |
| {AGESA_ALLOCATE_BUFFER, BiosAllocateBuffer }, |
| {AGESA_DEALLOCATE_BUFFER, BiosDeallocateBuffer }, |
| {AGESA_DO_RESET, BiosReset }, |
| {AGESA_LOCATE_BUFFER, BiosLocateBuffer }, |
| {AGESA_READ_SPD, BiosReadSpd }, |
| {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, |
| {AGESA_RUNFUNC_ONAP, BiosRunFuncOnAp }, |
| {AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopUnsupported }, |
| {AGESA_HOOKBEFORE_DRAM_INIT, BiosHookBeforeDramInit }, |
| {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, |
| {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, |
| {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, |
| }; |
| |
| AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr) |
| { |
| UINTN i; |
| AGESA_STATUS CalloutStatus; |
| UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]); |
| |
| /* |
| * printk(BIOS_SPEW,"%s function: %x\n", __func__, (u32) Func); |
| */ |
| |
| CalloutStatus = AGESA_UNSUPPORTED; |
| |
| for (i = 0; i < CallOutCount; i++) { |
| if (BiosCallouts[i].CalloutName == Func) { |
| CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr); |
| return CalloutStatus; |
| } |
| } |
| |
| return CalloutStatus; |
| } |
| |
| /* Call the host environment interface to provide a user hook opportunity. */ |
| AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) |
| { |
| MEM_DATA_STRUCT *MemData = ConfigPtr; |
| |
| printk(BIOS_INFO, "Setting DDR3 voltage: "); |
| FCH_IOMUX(184) = 2; // GPIO184: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V |
| switch (MemData->ParameterListPtr->DDR3Voltage) { |
| case VOLT1_25: // board is not able to provide this |
| MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry |
| printk(BIOS_INFO, "can't provide 1.25 V, using "); |
| // fall through |
| default: // AGESA.h says in mixed case 1.5V DIMMs get excluded |
| case VOLT1_35: |
| FCH_GPIO(184) = 0x08; // = output, disable PU, set to 0 |
| printk(BIOS_INFO, "1.35 V\n"); |
| break; |
| case VOLT1_5: |
| FCH_GPIO(184) = 0xC8; // = output, disable PU, set to 1 |
| printk(BIOS_INFO, "1.5 V\n"); |
| } |
| |
| return AGESA_SUCCESS; |
| } |