| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * mrndr.c |
| * |
| * Common Northbridge functions for Ridgeback Recovery |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: (Proc/Recovery/Mem) |
| * @e \$Revision: 48317 $ @e \$Date: 2011-03-08 01:38:14 +0800 (Tue, 08 Mar 2011) $ |
| * |
| **/ |
| /***************************************************************************** |
| * |
| * Copyright (c) 2011, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * *************************************************************************** |
| * |
| */ |
| |
| /* |
| *---------------------------------------------------------------------------- |
| * MODULES USED |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| |
| |
| #include "AGESA.h" |
| #include "amdlib.h" |
| #include "Ids.h" |
| #include "cpuFamRegisters.h" |
| #include "cpuRegisters.h" |
| #include "cpuFamilyTranslation.h" |
| #include "mrport.h" |
| #include "mm.h" |
| #include "mn.h" |
| #include "mrndr.h" |
| #include "heapManager.h" |
| #include "AdvancedApi.h" |
| #include "Filecode.h" |
| CODE_GROUP (G2_PEI) |
| RDATA_GROUP (G2_PEI) |
| |
| #define FILECODE PROC_RECOVERY_MEM_NB_DR_MRNDR_FILECODE |
| /*---------------------------------------------------------------------------- |
| * DEFINITIONS AND MACROS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| #define SPLIT_CHANNEL 0x20000000 |
| #define CHANNEL_SELECT 0x10000000 |
| #define MAX_DELAYS 9 /* 8 data bytes + 1 ECC byte */ |
| #define MAX_DIMMS 4 /* 4 DIMMs per channel */ |
| |
| /*---------------------------------------------------------------------------- |
| * TYPEDEFS AND STRUCTURES |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * PROTOTYPES OF LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| VOID |
| STATIC |
| MemRecNInitNBRegTableDR ( |
| IN OUT TSEFO *NBRegTable |
| ); |
| |
| UINT32 |
| STATIC |
| MemRecNCmnGetSetFieldDR ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 IsSet, |
| IN BIT_FIELD_NAME FieldName, |
| IN UINT32 Field |
| ); |
| |
| UINT32 |
| STATIC |
| MemRecNcmnGetSetTrainDlyDR ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 IsSet, |
| IN TRN_DLY_TYPE TrnDly, |
| IN DRBN DrbnVar, |
| IN UINT16 Field |
| ); |
| |
| BOOLEAN |
| STATIC |
| MemRecNIsIdSupportedDr ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN CPU_LOGICAL_ID *LogicalIdPtr |
| ); |
| |
| /*---------------------------------------------------------------------------- |
| * EXPORTED FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| STATIC CONST UINT32 RecModeDefRegArrayDR[] = { |
| BFDramControlReg, 0x320C2A06, |
| BFDramBankAddrReg, 0x00001111, |
| BFDramMRSReg, 0x000400A4, |
| BFDramTimingLoReg, 0x000A0092, |
| BFDramTimingHiReg, 0xB6D218FF, |
| BFDramConfigLoReg, 0x00000000, |
| BFDramConfigHiReg, 0x1F48010B, |
| NULL |
| }; |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function initializes the northbridge block |
| * |
| * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK |
| * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT |
| * @param[in] NodeID - Node ID for this NB block |
| * |
| * @return TRUE - This node is a RB and this NB block has been initialized |
| * @return FALSE - This node is not a RB |
| */ |
| |
| BOOLEAN |
| MemRecConstructNBBlockDR ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN OUT MEM_DATA_STRUCT *MemPtr, |
| IN UINT8 NodeID |
| ) |
| { |
| UINT8 i; |
| UINT8 Dct; |
| UINT8 Channel; |
| DIE_STRUCT *MCTPtr; |
| ALLOCATE_HEAP_PARAMS AllocHeapParams; |
| |
| // |
| // Determine if this is the expected NB Type |
| // |
| GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); |
| if (!MemRecNIsIdSupportedDr (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) { |
| return FALSE; |
| } |
| |
| // |
| // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs |
| // |
| MCTPtr = &MemPtr->DiesPerSystem[NodeID]; |
| AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_DR * ( |
| sizeof (DCT_STRUCT) + ( |
| MAX_CHANNELS_PER_DCT_DR * ( |
| sizeof (CH_DEF_STRUCT) + ( |
| MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES |
| ) |
| ) |
| ) |
| ) + (sizeof (TSEFO) * BFEndOfList); |
| AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0); |
| AllocHeapParams.Persist = HEAP_LOCAL_CACHE; |
| if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) { |
| return FALSE; |
| } |
| |
| MemPtr->DieCount = 1; |
| MCTPtr->DctCount = MAX_DCTS_PER_NODE_DR; |
| MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr; |
| AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_DR * sizeof (DCT_STRUCT); |
| for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DR; Dct++) { |
| MCTPtr->DctData[Dct].Dct = Dct; |
| MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_DR; |
| MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr; |
| MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct; |
| AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_DR * sizeof (CH_DEF_STRUCT); |
| for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_DR; Channel++) { |
| MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr; |
| AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2; |
| MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr; |
| MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct; |
| AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS); |
| } |
| } |
| |
| // |
| // Initialize NB block's variables |
| // |
| NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr; |
| NBPtr->MemPtr = MemPtr; |
| NBPtr->RefPtr = MemPtr->ParameterListPtr; |
| NBPtr->MCTPtr = MCTPtr; |
| NBPtr->SPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL]; |
| NBPtr->AllNodeSPDPtr = &MemPtr->SpdDataStructure[MemPtr->DiesPerSystem[NodeID].SocketId * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL]; |
| |
| NBPtr->DctCachePtr = NBPtr->DctCache; |
| |
| MemRecNInitNBRegTableDR (NBPtr->NBRegTable); |
| NBPtr->Dct = 0; |
| NBPtr->Channel = 0; |
| NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); |
| |
| LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader); |
| LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader); |
| for (i = 0; i < NumberOfHooks; i++) { |
| NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue; |
| } |
| |
| NBPtr->InitRecovery = MemRecNMemInitNb; |
| |
| NBPtr->RecModeDefRegArray = RecModeDefRegArrayDR; |
| |
| NBPtr->SwitchNodeRec = (VOID (*) (MEM_NB_BLOCK *, UINT8)) MemRecDefRet; |
| NBPtr->SwitchDCT = MemRecNSwitchDctDR; |
| NBPtr->SwitchChannel = MemRecNSwitchChannelDR; |
| NBPtr->SetMaxLatency = MemRecNSetMaxLatencyNb; |
| NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb; |
| NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb; |
| NBPtr->sendZQCmd = MemRecNSendZQCmdNb; |
| NBPtr->SetDramOdtRec = MemRecNSetDramOdtNb; |
| |
| NBPtr->GetBitField = MemRecNGetBitFieldNb; |
| NBPtr->SetBitField = MemRecNSetBitFieldNb; |
| NBPtr->GetTrainDly = MemRecNGetTrainDlyNb; |
| NBPtr->SetTrainDly = MemRecNSetTrainDlyNb; |
| NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldDR; |
| NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyDR; |
| NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctDR; |
| NBPtr->TrainingFlow = MemNRecTrainingFlowNb; |
| NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctDR; |
| NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctDR; |
| NBPtr->IsSupported[DramModeBeforeDimmPres] = TRUE; |
| NBPtr->IsSupported[CheckClearOnDimmMirror] = TRUE; |
| MemRecNSwitchDctDR (NBPtr, 0); |
| |
| return TRUE; |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function sets the current DCT to work on. |
| * Should be called before accessing a certain DCT |
| * All data structures will be updated to point to the current DCT |
| * |
| * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK |
| * @param[in] Dct - ID of the target DCT |
| * |
| */ |
| |
| VOID |
| MemRecNSwitchDctDR ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Dct |
| ) |
| { |
| NBPtr->Dct = Dct & 1; |
| NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[Dct * MAX_DIMMS_PER_CHANNEL]); |
| NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]); |
| |
| MemRecNSwitchChannelDR (NBPtr, NBPtr->Channel); |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function sets the current channel to work on. |
| * Should be called before accessing a certain channel |
| * All data structures will be updated to point to the current channel |
| * |
| * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK |
| * @param[in] Channel - ID of the target channel |
| * |
| */ |
| |
| VOID |
| MemRecNSwitchChannelDR ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Channel |
| ) |
| { |
| NBPtr->Channel = Channel & 1; |
| NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[NBPtr->Channel]); |
| } |
| /*---------------------------------------------------------------------------- |
| * LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function gets or set DQS timing during training. |
| * |
| * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK |
| * @param[in] TrnDly - type of delay to be set |
| * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed |
| * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding |
| * @param[in] Field - Value to be programmed |
| * @param[in] IsSet - Indicates if the function will set or get |
| * |
| * @return value read, if the function is used as a "get" |
| */ |
| |
| UINT32 |
| STATIC |
| MemRecNcmnGetSetTrainDlyDR ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 IsSet, |
| IN TRN_DLY_TYPE TrnDly, |
| IN DRBN DrbnVar, |
| IN UINT16 Field |
| ) |
| { |
| UINT16 Index; |
| UINT16 Offset; |
| UINT32 Value; |
| UINT32 Address; |
| UINT8 Dimm; |
| UINT8 Byte; |
| |
| Dimm = DRBN_DIMM (DrbnVar); |
| Byte = DRBN_BYTE (DrbnVar); |
| |
| ASSERT (Dimm < 4); |
| ASSERT (Byte <= 8); |
| |
| switch (TrnDly) { |
| case AccessRcvEnDly: |
| Index = 0x10; |
| break; |
| case AccessWrDqsDly: |
| Index = 0x30; |
| break; |
| case AccessWrDatDly: |
| Index = 0x01; |
| break; |
| case AccessRdDqsDly: |
| Index = 0x05; |
| break; |
| case AccessPhRecDly: |
| Index = 0x50; |
| break; |
| default: |
| Index = 0; |
| IDS_ERROR_TRAP; |
| } |
| |
| switch (TrnDly) { |
| case AccessRcvEnDly: |
| case AccessWrDqsDly: |
| Index += (Dimm * 3); |
| if (Byte & 0x04) { |
| // if byte 4,5,6,7 |
| Index += 0x10; |
| } |
| if (Byte & 0x02) { |
| // if byte 2,3,6,7 |
| Index++; |
| } |
| Offset = 16 * (Byte % 2); |
| break; |
| |
| case AccessRdDqsDly: |
| Field &= ~ 0x0001; |
| case AccessWrDatDly: |
| Index += (Dimm * 0x100); |
| // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need |
| // to run AccessPhRecDly sequence. |
| case AccessPhRecDly: |
| Index += (Byte / 4); |
| Offset = 8 * (Byte % 4); |
| break; |
| default: |
| Offset = 0; |
| IDS_ERROR_TRAP; |
| } |
| |
| Address = Index; |
| MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); |
| while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {} |
| Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg); |
| |
| if (IsSet) { |
| if (TrnDly == AccessPhRecDly) { |
| Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03]; |
| } |
| |
| Value = ((UINT32)Field << Offset) | (Value & (~((UINT32)0xFF << Offset))); |
| MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); |
| Address |= DCT_ACCESS_WRITE; |
| MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); |
| while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {} |
| |
| if (TrnDly == AccessPhRecDly) { |
| NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value; |
| } |
| } else { |
| Value = (Value >> Offset) & 0xFF; |
| } |
| |
| return Value; |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function gets or sets a value to a bit field in a PCI register. |
| * |
| * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK |
| * @param[in] IsSet - Indicates if the function will set or get |
| * @param[in] FieldName - Name of field to be set |
| * @param[in] Field - Value to be programmed |
| * |
| * @return value read, if the function is used as a "get" |
| */ |
| |
| UINT32 |
| STATIC |
| MemRecNCmnGetSetFieldDR ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 IsSet, |
| IN BIT_FIELD_NAME FieldName, |
| IN UINT32 Field |
| ) |
| { |
| SBDFO Address; |
| PCI_ADDR PciAddr; |
| UINT8 Type; |
| UINT32 Value; |
| UINT32 Highbit; |
| UINT32 Lowbit; |
| UINT32 Mask; |
| |
| Value = 0; |
| if (FieldName < BFEndOfList) { |
| Address = NBPtr->NBRegTable[FieldName]; |
| if (Address) { |
| Lowbit = TSEFO_END (Address); |
| Highbit = TSEFO_START (Address); |
| Type = TSEFO_TYPE (Address); |
| |
| // If Fn2 and DCT1 selected, set Address to be 1xx |
| if (((Address & 0xF000) == 0x2000) && NBPtr->Dct) { |
| Address |= 0x0100; |
| } |
| if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) { |
| // Special DCT Phy access |
| Address &= 0x0FFFFFFF; |
| Lowbit = 0; |
| Highbit = 16; |
| } else { |
| // Normal DCT Phy access |
| Address = TSEFO_OFFSET (Address); |
| } |
| |
| |
| if (Type == NB_ACCESS) { |
| Address |= (((UINT32) (24 + 0)) << 15); |
| PciAddr.AddressValue = Address; |
| LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader); |
| } else if (Type == DCT_PHY_ACCESS) { |
| MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); |
| while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {} |
| |
| Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg); |
| } else { |
| IDS_ERROR_TRAP; |
| } |
| |
| if (IsSet) { |
| // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case |
| if ((Highbit - Lowbit) != 31) { |
| Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1); |
| } else { |
| Mask = (UINT32)0xFFFFFFFF; |
| } |
| Value &= ~(Mask << Lowbit); |
| Value |= (Field & Mask) << Lowbit; |
| |
| if (Type == NB_ACCESS) { |
| PciAddr.AddressValue = Address; |
| LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader); |
| } else if (Type == DCT_PHY_ACCESS) { |
| MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); |
| Address |= DCT_ACCESS_WRITE; |
| |
| MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); |
| while (MemRecNGetBitFieldNb (NBPtr, BFDctAccessDone) == 0) {} |
| } else { |
| IDS_ERROR_TRAP; |
| } |
| } else { |
| Value = Value >> Lowbit; // Shift |
| // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case |
| if ((Highbit - Lowbit) != 31) { |
| Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1); |
| } |
| } |
| } |
| } else { |
| IDS_ERROR_TRAP; // Invalid bit field index |
| } |
| return Value; |
| } |
| |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function initializes bit field translation table |
| * |
| * @param[in,out] *NBRegTable - Pointer to the NB Table * |
| */ |
| |
| VOID |
| STATIC |
| MemRecNInitNBRegTableDR ( |
| IN OUT TSEFO *NBRegTable |
| ) |
| { |
| UINT16 i; |
| for (i = 0; i <= BFEndOfList; i++) { |
| NBRegTable[i] = 0; |
| } |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31, 0, BFDevVendorIDReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60), 2, 0, BFNodeID); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31, 0, BFCSBaseAddr0Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31, 0, BFCSBaseAddr1Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31, 0, BFCSBaseAddr2Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31, 0, BFCSBaseAddr3Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x50), 31, 0, BFCSBaseAddr4Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x54), 31, 0, BFCSBaseAddr5Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x58), 31, 0, BFCSBaseAddr6Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x5C), 31, 0, BFCSBaseAddr7Reg); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31, 0, BFCSMask0Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31, 0, BFCSMask1Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x68), 31, 0, BFCSMask2Reg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x6C), 31, 0, BFCSMask3Reg); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 0, BFDramControlReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 0, BFDramInitRegReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31, 0, BFDramBankAddrReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31, 0, BFDramMRSReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 9, 7, BFDramTerm); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31, 0, BFDramTimingLoReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31, 0, BFDramTimingHiReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31, 0, BFDramConfigLoReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 0, BFDramConfigHiReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 0, BFDctAddlOffsetReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31, 0, BFDctAddlDataReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 31, BFDctAccessDone); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4), 4, 0, BFNbFid); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15, 0, BFMrsAddress); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 7, 7, BFLevel); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 0, 0, BFInitDram); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 8, 8, BFDdr3Mode); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 9, 9, BFLegacyBiosMode); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 5, 5, BFSubMemclkRegDly); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 6, 6, BFOdtSwizzle); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 15, 8, BFCtrlWordCS); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 8, 8, BFDramEnabled); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg); |
| |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 6, 2, BFMctWrLimit); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis); |
| MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 29, 29, BFFlushWrOnStpGnt); |
| |
| MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31, 0, BFODCControl); |
| MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31, 0, BFAddrTmgControl); |
| |
| MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 0, 0, BFWrtLvTrEn); |
| MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 1, 1, BFWrtLvTrMode); |
| MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 5, 4, BFTrDimmSel); |
| MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11, 8, BFWrLvOdt); |
| MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn); |
| MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 30, BFDisAutoComp); |
| |
| } |
| |
| /*-----------------------------------------------------------------------------*/ |
| /** |
| * MemRecNIsIdSupportedDr |
| * This function matches the CPU_LOGICAL_ID with certain criteria to |
| * determine if it is supported by this NBBlock. |
| * |
| * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK |
| * @param[in] *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID |
| * |
| */ |
| BOOLEAN |
| STATIC |
| MemRecNIsIdSupportedDr ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN CPU_LOGICAL_ID *LogicalIdPtr |
| ) |
| { |
| |
| if ((LogicalIdPtr->Revision & (AMD_F10_RB_ALL |
| | AMD_F10_BL_ALL |
| | AMD_F10_DA_ALL )) != 0) { |
| return TRUE; |
| } else { |
| return FALSE; |
| } |
| } |