| # Config file for the Total Impact briQ |
| # This will make a target directory of ./briq |
| |
| target briq |
| |
| mainboard totalimpact/briq |
| |
| ## Use stage 1 initialization code |
| option CONFIG_USE_INIT=1 |
| |
| ## We don't use compressed image |
| option CONFIG_COMPRESS=0 |
| |
| ## Turn off POST codes |
| option NO_POST=1 |
| |
| ## Enable serial console |
| option DEFAULT_CONSOLE_LOGLEVEL=8 |
| option CONFIG_CONSOLE_SERIAL8250=1 |
| |
| ## Boot linux from IDE |
| option CONFIG_IDE_PAYLOAD=1 |
| option IDE_BOOT_DRIVE=0 |
| option IDE_SWAB=1 |
| option IDE_OFFSET=0 |
| |
| # ROM is 1Mb |
| option ROM_SIZE=1024*1024 |
| |
| # Set stack and heap sizes (stage 2) |
| option STACK_SIZE=0x10000 |
| option HEAP_SIZE=0x10000 |
| |
| # Sandpoint Demo Board |
| romimage "normal" |
| ## Base of ROM |
| option _ROMBASE=0xfff00000 |
| |
| ## Sandpoint reset vector |
| option _RESET=_ROMBASE+0x100 |
| |
| ## Exception vectors (other than reset vector) |
| option _EXCEPTION_VECTORS=_RESET+0x100 |
| |
| ## Start of linuxBIOS in the boot rom |
| ## = _RESET + exeception vector table size |
| option _ROMSTART=_RESET+0x3100 |
| |
| ## LinuxBIOS C code runs at this location in RAM |
| option _RAMBASE=0x00100000 |
| option _RAMSTART=0x00100000 |
| |
| option CONFIG_BRIQ_750FX=1 |
| #option CONFIG_BRIQ_7400=1 |
| |
| end |
| |
| buildrom ./linuxbios.rom ROM_SIZE "normal" |