| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| #include <console/console.h> |
| #include <fsp/util.h> |
| #include <soc/meminit.h> |
| #include <string.h> |
| |
| #define LPX_PHYSICAL_CH_WIDTH 16 |
| #define LPX_CHANNELS CHANNEL_COUNT(LPX_PHYSICAL_CH_WIDTH) |
| |
| #define DDR4_PHYSICAL_CH_WIDTH 64 |
| #define DDR4_CHANNELS CHANNEL_COUNT(DDR4_PHYSICAL_CH_WIDTH) |
| |
| #define DDR5_PHYSICAL_CH_WIDTH 32 |
| #define DDR5_CHANNELS CHANNEL_COUNT(DDR5_PHYSICAL_CH_WIDTH) |
| |
| static void set_rcomp_config(FSP_M_CONFIG *mem_cfg, const struct mb_cfg *mb_cfg) |
| { |
| if (mb_cfg->rcomp.resistor != 0) |
| mem_cfg->RcompResistor = mb_cfg->rcomp.resistor; |
| |
| for (size_t i = 0; i < ARRAY_SIZE(mem_cfg->RcompTarget); i++) { |
| if (mb_cfg->rcomp.targets[i] != 0) |
| mem_cfg->RcompTarget[i] = mb_cfg->rcomp.targets[i]; |
| } |
| } |
| |
| static void meminit_lp4x(FSP_M_CONFIG *mem_cfg) |
| { |
| mem_cfg->DqPinsInterleaved = 0; |
| } |
| |
| static void meminit_lp5x(FSP_M_CONFIG *mem_cfg, const struct mem_lp5x_config *lp5x_config) |
| { |
| mem_cfg->DqPinsInterleaved = 0; |
| mem_cfg->Lp5CccConfig = lp5x_config->ccc_config; |
| } |
| |
| static void meminit_ddr(FSP_M_CONFIG *mem_cfg, const struct mem_ddr_config *ddr_config) |
| { |
| mem_cfg->DqPinsInterleaved = ddr_config->dq_pins_interleaved; |
| } |
| |
| static const struct soc_mem_cfg soc_mem_cfg[] = { |
| [MEM_TYPE_DDR4] = { |
| .num_phys_channels = DDR4_CHANNELS, |
| .phys_to_mrc_map = { |
| [0] = 0, |
| [1] = 4, |
| }, |
| .md_phy_masks = { |
| /* |
| * Only physical channel 0 is populated in case of half-populated |
| * configuration. |
| */ |
| .half_channel = BIT(0), |
| /* In mixed topologies, channel 1 is always memory-down. */ |
| .mixed_topo = BIT(1), |
| }, |
| }, |
| [MEM_TYPE_DDR5] = { |
| .num_phys_channels = DDR5_CHANNELS, |
| .phys_to_mrc_map = { |
| [0] = 0, |
| [1] = 1, |
| [2] = 4, |
| [3] = 5, |
| }, |
| .md_phy_masks = { |
| /* |
| * Physical channels 0 and 1 are populated in case of |
| * half-populated configurations. |
| */ |
| .half_channel = BIT(0) | BIT(1), |
| /* In mixed topologies, channels 2 and 3 are always memory-down. */ |
| .mixed_topo = BIT(2) | BIT(3), |
| }, |
| }, |
| [MEM_TYPE_LP4X] = { |
| .num_phys_channels = LPX_CHANNELS, |
| .phys_to_mrc_map = { |
| [0] = 0, |
| [1] = 1, |
| [2] = 2, |
| [3] = 3, |
| [4] = 4, |
| [5] = 5, |
| [6] = 6, |
| [7] = 7, |
| }, |
| .md_phy_masks = { |
| /* |
| * Physical channels 0, 1, 2 and 3 are populated in case of |
| * half-populated configurations. |
| */ |
| .half_channel = BIT(0) | BIT(1) | BIT(2) | BIT(3), |
| /* LP4x does not support mixed topologies. */ |
| }, |
| }, |
| [MEM_TYPE_LP5X] = { |
| .num_phys_channels = LPX_CHANNELS, |
| .phys_to_mrc_map = { |
| [0] = 0, |
| [1] = 1, |
| [2] = 2, |
| [3] = 3, |
| [4] = 4, |
| [5] = 5, |
| [6] = 6, |
| [7] = 7, |
| }, |
| .md_phy_masks = { |
| /* |
| * Physical channels 0, 1, 2 and 3 are populated in case of |
| * half-populated configurations. |
| */ |
| .half_channel = BIT(0) | BIT(1) | BIT(2) | BIT(3), |
| /* LP5x does not support mixed topologies. */ |
| }, |
| }, |
| }; |
| |
| static void mem_init_spd_upds(FSP_M_CONFIG *mem_cfg, const struct mem_channel_data *data) |
| { |
| uint32_t *spd_upds[MRC_CHANNELS][CONFIG_DIMMS_PER_CHANNEL] = { |
| [0] = { &mem_cfg->MemorySpdPtr00, &mem_cfg->MemorySpdPtr01, }, |
| [1] = { &mem_cfg->MemorySpdPtr02, &mem_cfg->MemorySpdPtr03, }, |
| [2] = { &mem_cfg->MemorySpdPtr04, &mem_cfg->MemorySpdPtr05, }, |
| [3] = { &mem_cfg->MemorySpdPtr06, &mem_cfg->MemorySpdPtr07, }, |
| [4] = { &mem_cfg->MemorySpdPtr08, &mem_cfg->MemorySpdPtr09, }, |
| [5] = { &mem_cfg->MemorySpdPtr10, &mem_cfg->MemorySpdPtr11, }, |
| [6] = { &mem_cfg->MemorySpdPtr12, &mem_cfg->MemorySpdPtr13, }, |
| [7] = { &mem_cfg->MemorySpdPtr14, &mem_cfg->MemorySpdPtr15, }, |
| }; |
| uint8_t *disable_dimm_upds[MRC_CHANNELS] = { |
| &mem_cfg->DisableDimmMc0Ch0, |
| &mem_cfg->DisableDimmMc0Ch1, |
| &mem_cfg->DisableDimmMc0Ch2, |
| &mem_cfg->DisableDimmMc0Ch3, |
| &mem_cfg->DisableDimmMc1Ch0, |
| &mem_cfg->DisableDimmMc1Ch1, |
| &mem_cfg->DisableDimmMc1Ch2, |
| &mem_cfg->DisableDimmMc1Ch3, |
| }; |
| size_t ch, dimm; |
| |
| mem_cfg->MemorySpdDataLen = data->spd_len; |
| |
| for (ch = 0; ch < MRC_CHANNELS; ch++) { |
| uint8_t *disable_dimm_ptr = disable_dimm_upds[ch]; |
| *disable_dimm_ptr = 0; |
| |
| for (dimm = 0; dimm < CONFIG_DIMMS_PER_CHANNEL; dimm++) { |
| uint32_t *spd_ptr = spd_upds[ch][dimm]; |
| |
| *spd_ptr = data->spd[ch][dimm]; |
| if (!*spd_ptr) |
| *disable_dimm_ptr |= BIT(dimm); |
| } |
| } |
| } |
| |
| static void mem_init_dq_dqs_upds(void *upds[MRC_CHANNELS], const void *map, size_t upd_size, |
| const struct mem_channel_data *data, bool auto_detect) |
| { |
| size_t i; |
| |
| for (i = 0; i < MRC_CHANNELS; i++, map += upd_size) { |
| if (auto_detect || |
| !channel_is_populated(i, MRC_CHANNELS, data->ch_population_flags)) |
| memset(upds[i], 0, upd_size); |
| else |
| memcpy(upds[i], map, upd_size); |
| } |
| } |
| |
| static void mem_init_dq_upds(FSP_M_CONFIG *mem_cfg, const struct mem_channel_data *data, |
| const struct mb_cfg *mb_cfg, bool auto_detect) |
| { |
| void *dq_upds[MRC_CHANNELS] = { |
| &mem_cfg->DqMapCpu2DramCh0, |
| &mem_cfg->DqMapCpu2DramCh1, |
| &mem_cfg->DqMapCpu2DramCh2, |
| &mem_cfg->DqMapCpu2DramCh3, |
| &mem_cfg->DqMapCpu2DramCh4, |
| &mem_cfg->DqMapCpu2DramCh5, |
| &mem_cfg->DqMapCpu2DramCh6, |
| &mem_cfg->DqMapCpu2DramCh7, |
| }; |
| |
| const size_t upd_size = sizeof(mem_cfg->DqMapCpu2DramCh0); |
| |
| _Static_assert(upd_size == CONFIG_MRC_CHANNEL_WIDTH, "Incorrect DQ UPD size!"); |
| |
| mem_init_dq_dqs_upds(dq_upds, mb_cfg->dq_map, upd_size, data, auto_detect); |
| } |
| |
| static void mem_init_dqs_upds(FSP_M_CONFIG *mem_cfg, const struct mem_channel_data *data, |
| const struct mb_cfg *mb_cfg, bool auto_detect) |
| { |
| void *dqs_upds[MRC_CHANNELS] = { |
| &mem_cfg->DqsMapCpu2DramCh0, |
| &mem_cfg->DqsMapCpu2DramCh1, |
| &mem_cfg->DqsMapCpu2DramCh2, |
| &mem_cfg->DqsMapCpu2DramCh3, |
| &mem_cfg->DqsMapCpu2DramCh4, |
| &mem_cfg->DqsMapCpu2DramCh5, |
| &mem_cfg->DqsMapCpu2DramCh6, |
| &mem_cfg->DqsMapCpu2DramCh7, |
| }; |
| |
| const size_t upd_size = sizeof(mem_cfg->DqsMapCpu2DramCh0); |
| |
| _Static_assert(upd_size == CONFIG_MRC_CHANNEL_WIDTH / 8, "Incorrect DQS UPD size!"); |
| |
| mem_init_dq_dqs_upds(dqs_upds, mb_cfg->dqs_map, upd_size, data, auto_detect); |
| } |
| |
| void memcfg_init(FSP_M_CONFIG *mem_cfg, const struct mb_cfg *mb_cfg, |
| const struct mem_spd *spd_info, bool half_populated) |
| { |
| struct mem_channel_data data; |
| bool dq_dqs_auto_detect = false; |
| |
| mem_cfg->ECT = mb_cfg->ect; |
| mem_cfg->UserBd = mb_cfg->UserBd; |
| set_rcomp_config(mem_cfg, mb_cfg); |
| |
| switch (mb_cfg->type) { |
| case MEM_TYPE_DDR4: |
| case MEM_TYPE_DDR5: |
| meminit_ddr(mem_cfg, &mb_cfg->ddr_config); |
| dq_dqs_auto_detect = true; |
| break; |
| case MEM_TYPE_LP4X: |
| meminit_lp4x(mem_cfg); |
| break; |
| case MEM_TYPE_LP5X: |
| meminit_lp5x(mem_cfg, &mb_cfg->lp5x_config); |
| break; |
| default: |
| die("Unsupported memory type(%d)\n", mb_cfg->type); |
| } |
| |
| mem_populate_channel_data(&soc_mem_cfg[mb_cfg->type], spd_info, half_populated, &data); |
| mem_init_spd_upds(mem_cfg, &data); |
| mem_init_dq_upds(mem_cfg, &data, mb_cfg, dq_dqs_auto_detect); |
| mem_init_dqs_upds(mem_cfg, &data, mb_cfg, dq_dqs_auto_detect); |
| } |