| config REALTEK_8168_RESET |
| bool |
| help |
| This forces a realtek 10ec:8168 card to reset to ensure power state |
| is correct at boot. |
| |
| config REALTEK_8168_MACADDRESS |
| string "Realtek rt8168 mac address" |
| depends on REALTEK_8168_RESET && !RT8168_GET_MAC_FROM_VPD |
| default "00:e0:4c:00:c0:b0" |
| help |
| This is a string to set the mac address on a Realtek rt8168 card. |
| It must be in the form of "xx:xx:xx:xx:xx:xx", where x is a |
| hexadecimal number for it to be valid. Failing to do so will |
| result in the default macaddress being used. |
| |
| config RT8168_GET_MAC_FROM_VPD |
| bool |
| default n |
| select REALTEK_8168_RESET |
| |
| config RT8168_SUPPORT_LEGACY_VPD_MAC |
| bool |
| default n |
| help |
| Previously VPD expected that device_indexes set to zero were |
| special cased. Selecting this Kconfig restores the legacy |
| VPD format and behaviour. If unsure, you likely do not need this! |
| |
| config RT8168_SET_LED_MODE |
| bool |
| default n |
| select REALTEK_8168_RESET |
| help |
| This is to set a customized LED mode to distinguish 10/100/1000 |
| link and speed status with limited LEDs avaiable on a board. |
| Please refer to RTL811x datasheet section 7.2 Customizable LED |
| Configuration for details. With this flag enabled, the |
| customized_leds variable will be read from devicetree setting. |
| |
| config ATHEROS_ATL1E_SETMAC |
| bool |
| help |
| This sets the MAC address on boards featuring the atheros 1968:1026 |
| NIC which lack an eeprom to store it. |
| |
| config ATHEROS_ATL1E_MACADDRESS |
| string "Atheros AR8121/AR8113/AR8114 mac address" |
| depends on ATHEROS_ATL1E_SETMAC |
| default "90:e6:ba:24:f9:d2" |
| help |
| This is a string to set the mac address on an Atheros atl1e card. |
| It must be in the form of "xx:xx:xx:xx:xx:xx", where x is a |
| hexadecimal number for it to be valid. Failing to do so will |
| result in the default MAC address being used. |