| /* |
| This software and ancillary information (herein called SOFTWARE ) |
| called LinuxBIOS is made available under the terms described |
| here. The SOFTWARE has been approved for release with associated |
| LA-CC Number 00-34 . Unless otherwise indicated, this SOFTWARE has |
| been authored by an employee or employees of the University of |
| California, operator of the Los Alamos National Laboratory under |
| Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The |
| U.S. Government has rights to use, reproduce, and distribute this |
| SOFTWARE. The public may copy, distribute, prepare derivative works |
| and publicly display this SOFTWARE without charge, provided that this |
| Notice and any statement of authorship are reproduced on all copies. |
| Neither the Government nor the University makes any warranty, express |
| or implied, or assumes any liability or responsibility for the use of |
| this SOFTWARE. If SOFTWARE is modified to produce derivative works, |
| such modified SOFTWARE should be clearly marked, so as not to confuse |
| it with the version available from LANL. |
| */ |
| /* Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL |
| * rminnich@lanl.gov |
| */ |
| |
| |
| /* |
| * C Bootstrap code for the LinuxBIOS |
| */ |
| |
| |
| #include <console/console.h> |
| #include <version.h> |
| #include <boot/tables.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <delay.h> |
| #include <stdlib.h> |
| #include <part/hard_reset.h> |
| #include <part/init_timer.h> |
| #include <boot/elf.h> |
| |
| /** |
| * @brief Main function of the DRAM part of LinuxBIOS. |
| * |
| * LinuxBIOS is divided into Pre-DRAM part and DRAM part. |
| * |
| * |
| * Device Enumeration: |
| * In the dev_enumerate() phase, |
| */ |
| void hardwaremain(int boot_complete) |
| { |
| struct lb_memory *lb_mem; |
| |
| post_code(0x80); |
| |
| /* displayinit MUST PRECEDE ALL PRINTK! */ |
| console_init(); |
| |
| post_code(0x39); |
| |
| printk_notice("LinuxBIOS-%s%s %s %s...\n", |
| linuxbios_version, linuxbios_extra_version, linuxbios_build, |
| (boot_complete)?"rebooting":"booting"); |
| |
| post_code(0x40); |
| |
| /* If we have already booted attempt a hard reboot */ |
| if (boot_complete) { |
| hard_reset(); |
| } |
| |
| /* FIXME: Is there a better way to handle this? */ |
| init_timer(); |
| |
| /* Find the devices we don't have hard coded knowledge about. */ |
| dev_enumerate(); |
| post_code(0x66); |
| /* Now compute and assign the bus resources. */ |
| dev_configure(); |
| post_code(0x88); |
| /* Now actually enable devices on the bus */ |
| dev_enable(); |
| /* And of course initialize devices on the bus */ |
| dev_initialize(); |
| post_code(0x89); |
| |
| /* Now that we have collected all of our information |
| * write our configuration tables. |
| */ |
| lb_mem = write_tables(); |
| |
| #if CONFIG_FS_STREAM == 1 |
| filo(lb_mem); |
| #else |
| elfboot(lb_mem); |
| #endif |
| } |
| |