src/mainboard/pcengines/apu1/mainboard.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 Advanced Micro Devices, Inc.
 * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <device/pci_def.h>
#include <southbridge/amd/common/amd_pci_util.h>
#include <southbridge/amd/cimx/cimx_util.h>
#include <arch/acpi.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <cpu/amd/agesa/s3_resume.h>
#include <cpu/amd/mtrr.h>
#include <smbios.h>
#include <string.h>
#include "SBPLATFORM.h"
#include <southbridge/amd/cimx/sb800/pci_devs.h>
#include <northbridge/amd/agesa/family14/pci_devs.h>
#include <superio/nuvoton/nct5104d/nct5104d.h>
#include "gpio_ftns.h"

void set_pcie_reset(void);
void set_pcie_dereset(void);

/***********************************************************
 * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
 * This table is responsible for physically routing the PIC and
 * IOAPIC IRQs to the different PCI devices on the system.  It
 * is read and written via registers 0xC00/0xC01 as an
 * Index/Data pair.  These values are chipset and mainboard
 * dependent and should be updated accordingly.
 *
 * These values are used by the PCI configuration space,
 * MP Tables.  TODO: Make ACPI use these values too.
 *
 * The PCI INTA/B/C/D pins are connected to
 * FCH pins INTE/F/G/H on the schematic so these need
 * to be routed as well.
 */
static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
	/* INTA# - INTH# */
	[0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,
	/* Misc-nil,0,1,2, INT from Serial irq */
	[0x08] = 0x00,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
	/* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */
	[0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,
	/* IMC INT0 - 5 */
	[0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	/* USB Devs 18/19/20/22 INTA-C */
	[0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,
	/* IDE, SATA */
	[0x40] = 0x0B,0x0B,
	/* GPPInt0 - 3 */
	[0x50] = 0x0A,0x0B,0x0A,0x0B
};

static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
	/* INTA# - INTH# */
	[0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
	/* Misc-nil,0,1,2, INT from Serial irq */
	[0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
	/* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */
	[0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,
	/* IMC INT0 - 5 */
	[0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	/* USB Devs 18/19/22/20 INTA-C */
	[0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12,
	/* IDE, SATA */
	[0x40] = 0x11,0x13,
	/* GPPInt0 - 3 */
	[0x50] = 0x10,0x11,0x12,0x13
};

/*
 * This table defines the index into the picr/intr_data
 * tables for each device.  Any enabled device and slot
 * that uses hardware interrupts should have an entry
 * in this table to define its index into the FCH
 * PCI_INTR register 0xC00/0xC01.  This index will define
 * the interrupt that it should use.  Putting PIRQ_A into
 * the PIN A index for a device will tell that device to
 * use PIC IRQ 10 if it uses PIN A for its hardware INT.
 */
/*
 * The PCI slot INTA/B/C/D connected to PIRQE/F/G/H
 * but because of PCI INT_PIN swizzle isnt implemented to match
 * the IDSEL (dev 3) of the slot, the table is adjusted for the
 * swizzle and INTA is connected to PIRQH so PINA/B/C/D on
 * off-chip devices should get mapped to PIRQH/E/F/G.
 */
static const struct pirq_struct mainboard_pirq_data[] = {
	/* {PCI_devfn,        {PIN A, PIN B, PIN C, PIN D}}, */
	{GFX_DEVFN,           {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}},      /* VGA:       01.0 */
	{NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:       04.0 */
	{NB_PCIE_PORT2_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:       05.0 */
	{NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:       06.0 */
	{NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* miniPCIe:  07.0 */
	{SATA_DEVFN,          {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}},  /* SATA:      11.0 */
	{OHCI1_DEVFN,         {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1:     12.0 */
	{EHCI1_DEVFN,         {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1:     12.2 */
	{OHCI2_DEVFN,         {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2:     13.0 */
	{EHCI2_DEVFN,         {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2:     13.2 */
	{SMBUS_DEVFN,         {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS:     14.0 */
	{IDE_DEVFN,           {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}},   /* IDE:       14.1 */
	{HDA_DEVFN,           {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}},   /* HDA:       14.2 */
	{SB_PCI_PORT_DEVFN,   {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}},        /* PCI bdg:   14.4 */
	{OHCI4_DEVFN,         {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4:     14.5 */
	{SB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* miniPCIe:  15.0 */
	{OHCI3_DEVFN,         {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3:     16.0 */
	{EHCI3_DEVFN,         {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3:     16.2 */
};

/* PIRQ Setup */
static void pirq_setup(void)
{
	pirq_data_ptr = mainboard_pirq_data;
	pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct);
	intr_data_ptr = mainboard_intr_data;
	picr_data_ptr = mainboard_picr_data;
}

/* Wrapper to enable GPIO/UART devices under menuconfig. Revisit
 * once configuration file format for SPI flash storage is complete.
 */
#define SIO_PORT 0x2e

static void config_gpio_mux(void)
{
	struct device *uart, *gpio;

	uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP3);
	gpio = dev_find_slot_pnp(SIO_PORT, NCT5104D_GPIO0);
	if (uart)
		uart->enabled = CONFIG_PINMUX_UART_C;
	if (gpio)
		gpio->enabled = CONFIG_PINMUX_GPIO0;

	uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP4);
	gpio = dev_find_slot_pnp(SIO_PORT, NCT5104D_GPIO1);
	if (uart)
		uart->enabled = CONFIG_PINMUX_UART_D;
	if (gpio)
		gpio->enabled = CONFIG_PINMUX_GPIO1;
}

/**
 * TODO
 * SB CIMx callback
 */
void set_pcie_reset(void)
{
}

/**
 * TODO
 * mainboard specific SB CIMx callback
 */
void set_pcie_dereset(void)
{
}

/**********************************************
 * Enable the dedicated functions of the board.
 **********************************************/
static void mainboard_enable(device_t dev)
{
	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");

	config_gpio_mux();

	/* Power off unused clock pins of GPP PCIe devices */
	u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
	/* GPP CLK0-2 are connected to the 3 ethernet chips
	 * GPP CLK3-4 are connected to the miniPCIe slots */
	write8(misc_mem_clk_cntrl + 0, 0x21);
	write8(misc_mem_clk_cntrl + 1, 0x43);
	/* GPP CLK5 is only connected to test pads -> disable */
	write8(misc_mem_clk_cntrl + 2, 0x05);
	/* disable unconnected GPP CLK6-8 and SLT_GFX_CLK */
	write8(misc_mem_clk_cntrl + 3, 0x00);
	write8(misc_mem_clk_cntrl + 4, 0x00);

	/* Initialize the PIRQ data structures for consumption */
	pirq_setup();
}

/*
 * We will stuff a modified version of the first NICs (BDF 1:0.0) MAC address
 * into the smbios serial number location.
 */
const char *smbios_mainboard_serial_number(void)
{
	static char serial[10];
	device_t nic_dev;
	uintptr_t bar18;
	u32 mac_addr = 0;
	int i;

	nic_dev = dev_find_slot(1, PCI_DEVFN(0, 0));
	if ((serial[0] != 0) || !nic_dev)
		return serial;

	/* Read in the last 3 bytes of NIC's MAC address. */
	bar18 = pci_read_config32(nic_dev, 0x18);
	bar18 &= 0xFFFFFC00;
	for (i = 3; i < 6; i++) {
		mac_addr <<= 8;
		mac_addr |= read8((u8 *)bar18 + i);
	}
	mac_addr &= 0x00FFFFFF;
	mac_addr /= 4;
	mac_addr -= 64;

	snprintf(serial, sizeof(serial), "%d", mac_addr);
	return serial;
}

static void mainboard_final(void *chip_info)
{
	u32 mmio_base;

	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Final.\n");

	/*
	 * LED1/D7/GPIO_189 should be 0
	 * LED2/D6/GPIO_190 should be 1
	 * LED3/D5/GPIO_191 should be 1
	 */
	mmio_base = find_gpio_base();
	configure_gpio(mmio_base, GPIO_189, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW);
	configure_gpio(mmio_base, GPIO_190, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH);
	configure_gpio(mmio_base, GPIO_191, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH);
}

struct chip_operations mainboard_ops = {
	.enable_dev = mainboard_enable,
	.final = mainboard_final,
};