| #ifndef DEVICE_PNP_H |
| #define DEVICE_PNP_H |
| |
| #include <stdint.h> |
| #include <device/device.h> |
| /* When <device/pnp.h> is needed, it supposed to provide <device/pnp_{def,type}.h> */ |
| #include <device/pnp_def.h> |
| #include <device/pnp_type.h> |
| #include <arch/io.h> |
| |
| #if !ENV_PNP_SIMPLE_DEVICE |
| |
| /* Primitive PNP resource manipulation */ |
| void pnp_write_config(struct device *dev, u8 reg, u8 value); |
| u8 pnp_read_config(struct device *dev, u8 reg); |
| void pnp_set_logical_device(struct device *dev); |
| void pnp_set_enable(struct device *dev, int enable); |
| int pnp_read_enable(struct device *dev); |
| void pnp_set_iobase(struct device *dev, u8 index, u16 iobase); |
| void pnp_set_irq(struct device *dev, u8 index, u8 irq); |
| void pnp_set_drq(struct device *dev, u8 index, u8 drq); |
| |
| #endif |
| |
| /* PNP device operations */ |
| void pnp_read_resources(struct device *dev); |
| void pnp_set_resources(struct device *dev); |
| void pnp_enable_resources(struct device *dev); |
| void pnp_enable(struct device *dev); |
| void pnp_alt_enable(struct device *dev); |
| |
| extern struct device_operations pnp_ops; |
| |
| /* PNP helper operations */ |
| |
| struct pnp_info { |
| struct device_operations *ops; /* LDN-specific ops override */ |
| #define PNP_SKIP_FUNCTION 0xffff |
| u16 function; /* Must be at least 16 bits (virtual LDNs)! */ |
| unsigned int flags; |
| #define PNP_IO0 0x0000001 |
| #define PNP_IO1 0x0000002 |
| #define PNP_IO2 0x0000004 |
| #define PNP_IO3 0x0000008 |
| #define PNP_IO4 0x0000010 |
| #define PNP_IRQ0 0x0000020 |
| #define PNP_IRQ1 0x0000040 |
| #define PNP_DRQ0 0x0000080 |
| #define PNP_DRQ1 0x0000100 |
| #define PNP_EN 0x0000200 |
| #define PNP_MSC0 0x0000400 |
| #define PNP_MSC1 0x0000800 |
| #define PNP_MSC2 0x0001000 |
| #define PNP_MSC3 0x0002000 |
| #define PNP_MSC4 0x0004000 |
| #define PNP_MSC5 0x0008000 |
| #define PNP_MSC6 0x0010000 |
| #define PNP_MSC7 0x0020000 |
| #define PNP_MSC8 0x0040000 |
| #define PNP_MSC9 0x0080000 |
| #define PNP_MSCA 0x0100000 |
| #define PNP_MSCB 0x0200000 |
| #define PNP_MSCC 0x0400000 |
| #define PNP_MSCD 0x0800000 |
| #define PNP_MSCE 0x1000000 |
| u16 io0, io1, io2, io3, io4; |
| }; |
| struct resource *pnp_get_resource(struct device *dev, unsigned int index); |
| void pnp_enable_devices(struct device *dev, struct device_operations *ops, |
| unsigned int functions, struct pnp_info *info); |
| |
| struct pnp_mode_ops { |
| void (*enter_conf_mode)(struct device *dev); |
| void (*exit_conf_mode)(struct device *dev); |
| #if CONFIG(HAVE_ACPI_TABLES) |
| /* |
| * Generates ASL code to enter/exit config mode. |
| * |
| * @param idx The ACPI name of the SuperIO index port register. eg. 'INDX'. |
| * @param data The ACPI name of the SuperIO data port register. eg. 'DATA'. |
| */ |
| void (*ssdt_enter_conf_mode)(struct device *dev, const char *idx, const char *data); |
| void (*ssdt_exit_conf_mode)(struct device *dev, const char *idx, const char *data); |
| #endif |
| }; |
| void pnp_enter_conf_mode(struct device *dev); |
| void pnp_exit_conf_mode(struct device *dev); |
| #if CONFIG(HAVE_ACPI_TABLES) |
| /* |
| * Generates ASL code to enter/exit config mode if supported. |
| * The calling code has to place this within an ASL MethodOP. |
| * |
| * @param idx The ACPI name of the SuperIO index port register. eg. 'INDX'. |
| * @param data The ACPI name of the SuperIO data port register. eg. 'DATA'. |
| */ |
| void pnp_ssdt_enter_conf_mode(struct device *dev, const char *idx, const char *data); |
| void pnp_ssdt_exit_conf_mode(struct device *dev, const char *idx, const char *data); |
| #endif |
| /* PNP indexed I/O operations */ |
| |
| /* |
| * u8 pnp_read_index(u16 port, u8 reg) |
| * Description: |
| * This routine reads indexed I/O registers. The reg byte is written |
| * to the index register at I/O address = port. The result is then |
| * read from the data register at I/O address = port + 1. |
| * |
| * Parameters: |
| * @param[in] u16 port = The I/O address of the port index register. |
| * @param[in] u8 reg = The offset within the indexed space. |
| * @param[out] u8 result = The value read back from the data register. |
| */ |
| static inline u8 pnp_read_index(u16 port, u8 reg) |
| { |
| outb(reg, port); |
| return inb(port + 1); |
| } |
| |
| /* |
| * void pnp_write_index(u16 port, u8 reg, u8 value) |
| * Description: |
| * This routine writes indexed I/O registers. The reg byte is written |
| * to the index register at I/O address = port. The value byte is then |
| * written to the data register at I/O address = port + 1. |
| * |
| * Parameters: |
| * @param[in] u16 port = The address of the port index register. |
| * @param[in] u8 reg = The offset within the indexed space. |
| * @param[in] u8 value = The value to be written to the data register. |
| */ |
| static inline void pnp_write_index(u16 port, u8 reg, u8 value) |
| { |
| outb(reg, port); |
| outb(value, port + 1); |
| } |
| |
| /* |
| * void pnp_unset_and_set_index(u16 port, u8 reg, u8 unset, u8 set) |
| * Description: |
| * This routine unsets and sets bits from indexed I/O registers. The |
| * reg byte is written to the index register at I/O address = port. |
| * The value byte to update is data register at I/O address = port + 1. |
| * |
| * Unlike and-then-or style operations, no bitwise negation is necessary |
| * to specify the bits to unset. Because the bitwise negation implicitly |
| * promotes operands to int before operating, one may have to explicitly |
| * downcast the result if the data width is smaller than that of an int. |
| * Since warnings are errors in coreboot, explicit casting is necessary. |
| * |
| * Performing said negation inside this routine alleviates this problem, |
| * while allowing the compiler to warn if the input parameters overflow. |
| * Casting outside this function would silence valid compiler warnings. |
| * |
| * Parameters: |
| * @param[in] u16 port = The address of the port index register. |
| * @param[in] u8 reg = The offset within the indexed space. |
| * @param[in] u8 unset = Bitmask with ones to the bits to unset from the data register. |
| * @param[in] u8 set = Bitmask with ones to the bits to set from the data register. |
| */ |
| static inline void pnp_unset_and_set_index(u16 port, u8 reg, u8 unset, u8 set) |
| { |
| outb(reg, port); |
| |
| u8 value = inb(port + 1); |
| value &= (u8)~unset; |
| value |= set; |
| outb(value, port + 1); |
| } |
| |
| #endif /* DEVICE_PNP_H */ |