| # |
| # This file is part of the coreboot project. |
| # |
| # Copyright (C) 2009 coresystems GmbH |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; version 2 of the License. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| # |
| |
| bootblock-y += cbfs.c |
| ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y) |
| bootblock-y += memset.c |
| endif |
| bootblock-y += memchr.c |
| ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y) |
| bootblock-y += memcpy.c |
| endif |
| bootblock-y += memcmp.c |
| ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y) |
| bootblock-y += memmove.c |
| endif |
| |
| ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y) |
| romstage-y += memset.c |
| rmodules-y += memset.c |
| endif |
| romstage-y += memchr.c |
| ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y) |
| romstage-y += memcpy.c |
| rmodules-y += memcpy.c |
| endif |
| romstage-y += memcmp.c |
| rmodules-y += memcmp.c |
| romstage-y += cbfs.c |
| romstage-$(CONFIG_COMPRESS_RAMSTAGE) += lzma.c |
| #romstage-y += lzmadecode.c |
| romstage-$(CONFIG_CACHE_AS_RAM) += ramtest.c |
| romstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c |
| romstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c |
| romstage-$(CONFIG_CONSOLE_NE2K) += ne2k.c |
| romstage-$(CONFIG_SPKMODEM) += spkmodem.c |
| romstage-$(CONFIG_USBDEBUG_IN_ROMSTAGE) += usbdebug.c |
| |
| ifeq ($(CONFIG_EARLY_CBMEM_INIT),y) |
| romstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c |
| romstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c |
| endif |
| |
| romstage-y += compute_ip_checksum.c |
| ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y) |
| romstage-y += memmove.c |
| endif |
| romstage-$(CONFIG_ARCH_X86) += gcc.c |
| |
| ramstage-y += hardwaremain.c |
| ramstage-y += selfboot.c |
| ramstage-y += coreboot_table.c |
| ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y) |
| ramstage-y += memset.c |
| endif |
| ramstage-y += memchr.c |
| ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y) |
| ramstage-y += memcpy.c |
| endif |
| ramstage-y += memcmp.c |
| ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y) |
| ramstage-y += memmove.c |
| endif |
| ramstage-y += malloc.c |
| smm-$(CONFIG_SMM_TSEG) += malloc.c |
| ramstage-y += delay.c |
| ramstage-y += fallback_boot.c |
| ramstage-y += compute_ip_checksum.c |
| ramstage-y += version.c |
| ramstage-y += cbfs.c |
| ramstage-y += lzma.c |
| #ramstage-y += lzmadecode.c |
| ramstage-y += stack.c |
| ramstage-$(CONFIG_ARCH_X86) += gcc.c |
| ramstage-y += clog2.c |
| ramstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c |
| ramstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c |
| ramstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c |
| ramstage-$(CONFIG_USBDEBUG) += usbdebug.c |
| ramstage-$(CONFIG_SPKMODEM) += spkmodem.c |
| ramstage-$(CONFIG_BOOTSPLASH) += jpeg.c |
| ramstage-$(CONFIG_TRACE) += trace.c |
| ramstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c |
| ramstage-$(CONFIG_COVERAGE) += libgcov.c |
| ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += edid.c |
| ramstage-y += memrange.c |
| ramstage-$(CONFIG_COOP_MULTITASKING) += thread.c |
| ramstage-$(CONFIG_TIMER_QUEUE) += timer_queue.c |
| |
| # The CBMEM implementations are chosen based on CONFIG_DYNAMIC_CBMEM. |
| ifeq ($(CONFIG_DYNAMIC_CBMEM),y) |
| ramstage-y += dynamic_cbmem.c |
| romstage-y += dynamic_cbmem.c |
| else |
| ramstage-y += cbmem.c |
| romstage-$(CONFIG_EARLY_CBMEM_INIT) += cbmem.c |
| romstage-$(CONFIG_HAVE_ACPI_RESUME) += cbmem.c |
| endif # CONFIG_DYNAMIC_CBMEM |
| ramstage-y += cbmem_info.c |
| |
| ramstage-$(CONFIG_CONSOLE_NE2K) += ne2k.c |
| |
| ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y) |
| smm-y += memset.c |
| endif |
| ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y) |
| smm-y += memcpy.c |
| endif |
| ifneq ($(CONFIG_HAVE_ARCH_MEMMOVE),y) |
| smm-y += memmove.c |
| endif |
| smm-y += cbfs.c memcmp.c |
| smm-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c |
| smm-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c |
| smm-y += gcc.c |
| |
| $(obj)/lib/version.ramstage.o : $(obj)/build.h |
| |
| OPTION_TABLE_H:= |
| ifeq ($(CONFIG_HAVE_OPTION_TABLE),y) |
| OPTION_TABLE_H:=$(obj)/option_table.h |
| endif |
| |
| $(obj)/lib/uart8250mem.smm.o : $(OPTION_TABLE_H) |
| $(obj)/lib/uart8250.smm.o : $(OPTION_TABLE_H) |
| |
| ifeq ($(CONFIG_RELOCATABLE_MODULES),y) |
| ramstage-y += rmodule.c |
| romstage-$(CONFIG_RELOCATABLE_RAMSTAGE) += rmodule.c |
| |
| RMODULE_LDSCRIPT := $(src)/lib/rmodule.ld |
| RMODULE_LDFLAGS := -nostartfiles -shared -z defs -nostdlib -Bsymbolic -T $(RMODULE_LDSCRIPT) |
| |
| # rmodule_link_rules is a function that should be called with: |
| # (1) the object name to link |
| # (2) the dependencies |
| # (3) heap size of the relocatable module |
| # It will create the necessary Make rules. |
| define rmodule_link |
| $(strip $(1)): $(strip $(2)) $$(RMODULE_LDSCRIPT) $$(obj)/ldoptions |
| $$(LD) $$(RMODULE_LDFLAGS) --defsym=__heap_size=$(strip $(3)) -o $$@ $(strip $(2)) |
| $$(NM) -n $$@ > $$(basename $$@).map |
| endef |
| |
| endif |
| |