| config SOC_INTEL_APOLLOLAKE |
| bool |
| select INTEL_CAR_CQOS |
| help |
| Intel Apollolake support |
| |
| config SOC_INTEL_GEMINILAKE |
| bool |
| default n |
| select SOC_INTEL_APOLLOLAKE |
| select SOC_INTEL_COMMON_BLOCK_CNVI |
| select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT |
| select SOC_INTEL_COMMON_BLOCK_SGX |
| select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2 |
| select IDT_IN_EVERY_STAGE |
| select PAGING_IN_CACHE_AS_RAM |
| select INTEL_CAR_NEM |
| help |
| Intel GLK support |
| |
| if SOC_INTEL_APOLLOLAKE |
| |
| config CPU_SPECIFIC_OPTIONS |
| def_bool y |
| select ACPI_INTEL_HARDWARE_SLEEP_VALUES |
| select ACPI_NO_PCAT_8259 |
| select ARCH_X86 |
| select BOOT_DEVICE_SUPPORTS_WRITES |
| # CPU specific options |
| select CPU_INTEL_COMMON |
| select CPU_INTEL_FIRMWARE_INTERFACE_TABLE |
| select CPU_SUPPORTS_PM_TIMER_EMULATION |
| select PCR_COMMON_IOSF_1_0 |
| select SSE2 |
| select SUPPORT_CPU_UCODE_IN_CBFS |
| # Audio options |
| select ACPI_NHLT |
| select SOC_INTEL_COMMON_NHLT |
| # Misc options |
| select CACHE_MRC_SETTINGS |
| select FSP_PLATFORM_MEMORY_SETTINGS_VERSIONS |
| select FSP_STATUS_GLOBAL_RESET_REQUIRED_5 |
| select GENERIC_GPIO_LIB |
| select INTEL_DESCRIPTOR_MODE_CAPABLE |
| select HAVE_SMI_HANDLER |
| select HAVE_INTEL_FSP_REPO if !SOC_INTEL_GEMINILAKE |
| select MRC_SETTINGS_PROTECT |
| select MRC_SETTINGS_VARIABLE_DATA |
| select NO_XIP_EARLY_STAGES |
| select NO_PM_ACPI_TIMER |
| select PARALLEL_MP_AP_WORK |
| select PCIEXP_ASPM |
| select PCIEXP_COMMON_CLOCK |
| select PCIEXP_CLK_PM |
| select PCIEXP_L1_SUB_STATE |
| select PMC_INVALID_READ_AFTER_WRITE |
| select PMC_GLOBAL_RESET_ENABLE_LOCK |
| select REG_SCRIPT |
| select SA_ENABLE_IMR |
| select SOC_INTEL_COMMON |
| select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE |
| select SOC_INTEL_COMMON_BLOCK |
| select SOC_INTEL_COMMON_BLOCK_POWER_LIMIT |
| select SOC_INTEL_COMMON_BLOCK_ACPI |
| select SOC_INTEL_COMMON_BLOCK_CAR |
| select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG |
| select SOC_INTEL_COMMON_BLOCK_CPU |
| select SOC_INTEL_COMMON_BLOCK_DSP |
| select SOC_INTEL_COMMON_BLOCK_FAST_SPI |
| select SOC_INTEL_COMMON_BLOCK_GPIO |
| select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT |
| select SOC_INTEL_COMMON_BLOCK_GPIO_MULTI_ACPI_DEVICES |
| select SOC_INTEL_COMMON_BLOCK_GPIO_ITSS_POL_CFG |
| select SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY |
| select SOC_INTEL_COMMON_BLOCK_GRAPHICS |
| select SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PCR if DISABLE_HECI1_AT_PRE_BOOT |
| select SOC_INTEL_COMMON_BLOCK_ITSS |
| select SOC_INTEL_COMMON_BLOCK_I2C |
| select SOC_INTEL_COMMON_BLOCK_LPC |
| select SOC_INTEL_COMMON_BLOCK_LPSS |
| select SOC_INTEL_COMMON_BLOCK_PCR |
| select SOC_INTEL_COMMON_BLOCK_P2SB |
| select SOC_INTEL_COMMON_BLOCK_PMC |
| select SOC_INTEL_COMMON_BLOCK_PMC_DISCOVERABLE |
| select SOC_INTEL_COMMON_BLOCK_SRAM |
| select SOC_INTEL_COMMON_BLOCK_RTC |
| select SOC_INTEL_COMMON_BLOCK_SA |
| select SOC_INTEL_COMMON_BLOCK_SCS |
| select SOC_INTEL_COMMON_BLOCK_TIMER |
| select SOC_INTEL_COMMON_BLOCK_TCO |
| select SOC_INTEL_COMMON_BLOCK_UART |
| select SOC_INTEL_COMMON_BLOCK_XDCI |
| select SOC_INTEL_COMMON_BLOCK_XHCI |
| select SOC_INTEL_COMMON_BLOCK_XHCI_ELOG |
| select SOC_INTEL_COMMON_BLOCK_SMM |
| select SOC_INTEL_COMMON_BLOCK_SPI |
| select SOC_INTEL_COMMON_BLOCK_CSE |
| select SOC_INTEL_COMMON_BLOCK_SMBUS |
| select SOC_INTEL_COMMON_FSP_RESET |
| select SOC_INTEL_NO_BOOTGUARD_MSR |
| select SOUTHBRIDGE_INTEL_COMMON_SMBUS |
| select UDELAY_TSC |
| select TSC_MONOTONIC_TIMER |
| select PLATFORM_USES_FSP2_0 |
| select UDK_2015_BINDING if !SOC_INTEL_GEMINILAKE |
| select UDK_2017_BINDING if SOC_INTEL_GEMINILAKE |
| select SOC_INTEL_COMMON_RESET |
| select HAVE_CF9_RESET_PREPARE |
| select INTEL_GMA_ADD_VBT if RUN_FSP_GOP |
| select HAVE_FSP_GOP |
| select HAVE_FSP_LOGO_SUPPORT |
| select NO_UART_ON_SUPERIO |
| select INTEL_GMA_ACPI |
| select INTEL_GMA_SWSMISCI |
| select HAVE_ASAN_IN_ROMSTAGE |
| # This SoC does not map SPI flash like many previous SoC. Therefore we |
| # provide a custom media driver that facilitates mapping |
| select X86_CUSTOM_BOOTMEDIA |
| |
| config DISABLE_HECI1_AT_PRE_BOOT |
| default y |
| |
| config MAX_HECI_DEVICES |
| int |
| default 1 |
| |
| config MAX_CPUS |
| int |
| default 4 |
| |
| config VBOOT |
| select VBOOT_SEPARATE_VERSTAGE |
| select VBOOT_MUST_REQUEST_DISPLAY |
| select VBOOT_STARTS_IN_BOOTBLOCK |
| select VBOOT_VBNV_CMOS |
| select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH |
| |
| config TPM_ON_FAST_SPI |
| bool |
| default n |
| depends on MAINBOARD_HAS_LPC_TPM |
| help |
| TPM part is conntected on Fast SPI interface, but the LPC MMIO |
| TPM transactions are decoded and serialized over the SPI interface. |
| |
| config PCR_BASE_ADDRESS |
| hex |
| default 0xd0000000 |
| help |
| This option allows you to select MMIO Base Address of sideband bus. |
| |
| config DCACHE_RAM_BASE |
| hex |
| default 0xfef00000 |
| |
| config DCACHE_RAM_SIZE |
| hex |
| default 0x100000 if SOC_INTEL_GEMINILAKE |
| default 0xc0000 |
| help |
| The size of the cache-as-ram region required during bootblock |
| and/or romstage. |
| |
| config DCACHE_BSP_STACK_SIZE |
| hex |
| default 0x4000 |
| help |
| The amount of anticipated stack usage in CAR by bootblock and |
| other stages. |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ |
| int |
| default 100 |
| |
| config CPU_XTAL_HZ |
| default 19200000 |
| |
| config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ |
| int |
| default 133 |
| |
| # 32KiB bootblock is all that is mapped in by the CSE at top of 4GiB. |
| config C_ENV_BOOTBLOCK_SIZE |
| hex |
| default 0x8000 |
| |
| config ROMSTAGE_ADDR |
| hex |
| default 0xfef20000 |
| help |
| The base address (in CAR) where romstage should be linked |
| |
| config VERSTAGE_ADDR |
| hex |
| default 0xfef40000 |
| help |
| The base address (in CAR) where verstage should be linked |
| |
| config FSP_HEADER_PATH |
| default "src/vendorcode/intel/fsp/fsp2_0/glk" if SOC_INTEL_GEMINILAKE |
| default "3rdparty/fsp/ApolloLakeFspBinPkg/Include/" |
| |
| config FSP_FD_PATH |
| default "3rdparty/fsp/ApolloLakeFspBinPkg/FspBin/Fsp.fd" |
| |
| config FSP_M_ADDR |
| hex |
| default 0xfef40000 |
| help |
| The address FSP-M will be relocated to during build time |
| |
| config NEED_LBP2 |
| bool "Write contents for logical boot partition 2." |
| default n |
| help |
| Write the contents from a file into the logical boot partition 2 |
| region defined by LBP2_FMAP_NAME. |
| |
| config LBP2_FMAP_NAME |
| string "Name of FMAP region to put logical boot partition 2" |
| depends on NEED_LBP2 |
| default "SIGN_CSE" |
| help |
| Name of FMAP region to write logical boot partition 2 data. |
| |
| config LBP2_FROM_IFWI |
| bool "Extract the LBP2 from the IFWI binary" |
| depends on NEED_LBP2 |
| default n |
| help |
| The Logical Boot Partition will be automatically extracted |
| from the supplied IFWI binary |
| |
| config LBP2_FILE_NAME |
| string "Path of file to write to logical boot partition 2 region" |
| depends on NEED_LBP2 && !LBP2_FROM_IFWI |
| default "3rdparty/blobs/mainboard/\$(CONFIG_MAINBOARD_DIR)/lbp2.bin" |
| help |
| Name of file to store in the logical boot partition 2 region. |
| |
| config NEED_IFWI |
| bool "Write content into IFWI region" |
| default n |
| help |
| Write the content from a file into IFWI region defined by |
| IFWI_FMAP_NAME. |
| |
| config IFWI_FMAP_NAME |
| string "Name of FMAP region to pull IFWI into" |
| depends on NEED_IFWI |
| default "IFWI" |
| help |
| Name of FMAP region to write IFWI. |
| |
| config IFWI_FILE_NAME |
| string "Path of file to write to IFWI region" |
| depends on NEED_IFWI |
| default "3rdparty/blobs/mainboard/\$(CONFIG_MAINBOARD_DIR)/ifwi.bin" |
| help |
| Name of file to store in the IFWI region. |
| |
| config HEAP_SIZE |
| hex |
| default 0x8000 |
| |
| config NHLT_DMIC_1CH_16B |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for 1 channel 16B DMIC array. |
| |
| config NHLT_DMIC_2CH_16B |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for 2 channel 16B DMIC array. |
| |
| config NHLT_DMIC_4CH_16B |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for 4 channel 16B DMIC array. |
| |
| config NHLT_MAX98357 |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for headset codec. |
| |
| config NHLT_DA7219 |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for headset codec. |
| |
| config NHLT_RT5682 |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for headset codec. |
| # |
| # Each bit in QOS mask controls this many bytes. This is calculated as: |
| # (CACHE_WAYS / CACHE_BITS_PER_MASK) * CACHE_LINE_SIZE * CACHE_SETS |
| # |
| |
| config CACHE_QOS_SIZE_PER_BIT |
| hex |
| default 0x20000 # 128 KB |
| |
| config L2_CACHE_SIZE |
| hex |
| default 0x400000 if SOC_INTEL_GEMINILAKE |
| default 0x100000 |
| |
| config SMM_RESERVED_SIZE |
| hex |
| default 0x100000 |
| |
| config IFD_CHIPSET |
| string |
| default "glk" if SOC_INTEL_GEMINILAKE |
| default "aplk" |
| |
| config CPU_BCLK_MHZ |
| int |
| default 100 |
| |
| config CONSOLE_UART_BASE_ADDRESS |
| hex |
| default 0xddffc000 |
| depends on INTEL_LPSS_UART_FOR_CONSOLE |
| |
| config APL_SKIP_SET_POWER_LIMITS |
| bool |
| default n |
| help |
| Some Apollo Lake mainboards do not need the Running Average Power |
| Limits (RAPL) algorithm for a constant power management. |
| Set this config option to skip the RAPL configuration. |
| |
| config APL_SET_MIN_CLOCK_RATIO |
| bool |
| depends on !APL_SKIP_SET_POWER_LIMITS |
| default n |
| help |
| If the power budget of the mainboard is limited, it can be useful to |
| limit the CPU power dissipation at the cost of performance by setting |
| the lowest possible CPU clock. Enable this option if you need smallest |
| possible CPU clock. This setting can be overruled by the OS if it has an |
| p-state driver which can adjust the clock to its need. |
| |
| # M and N divisor values for clock frequency configuration. |
| # These values get us a 1.836 MHz clock (ideally we want 1.843 MHz) |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL |
| hex |
| default 0x25a |
| |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL |
| hex |
| default 0x7fff |
| |
| config SOC_ESPI |
| bool |
| default n |
| help |
| Use eSPI bus instead of LPC |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_MAX |
| int |
| default 3 |
| |
| config SOC_INTEL_I2C_DEV_MAX |
| int |
| default 8 |
| |
| # Don't include the early page tables in RW_A or RW_B cbfs regions |
| config RO_REGION_ONLY |
| string |
| default "pdpt pt" |
| |
| config INTEL_GMA_PANEL_2 |
| bool |
| default n |
| |
| config INTEL_GMA_BCLV_OFFSET |
| default 0xc8358 if INTEL_GMA_PANEL_2 |
| default 0xc8258 |
| |
| config INTEL_GMA_BCLV_WIDTH |
| default 32 |
| |
| config INTEL_GMA_BCLM_OFFSET |
| default 0xc8354 if INTEL_GMA_PANEL_2 |
| default 0xc8254 |
| |
| config INTEL_GMA_BCLM_WIDTH |
| default 32 |
| |
| endif |