| /* |
| * This file is part of the superiotool project. |
| * |
| * Copyright (C) 2006 coresystems GmbH <info@coresystems.de> |
| * Copyright (C) 2007-2008 Uwe Hermann <uwe@hermann-uwe.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include "superiotool.h" |
| |
| #define DEVICE_ID_BYTE1_REG 0x20 |
| #define DEVICE_ID_BYTE2_REG 0x21 |
| |
| #define VENDOR_ID_BYTE1_REG 0x23 |
| #define VENDOR_ID_BYTE2_REG 0x24 |
| |
| #define FINTEK_VENDOR_ID 0x3419 |
| |
| static const struct superio_registers reg_table[] = { |
| {0x0106, "F71862FG / F71863FG", { /* Same ID? Datasheet typo? */ |
| /* We assume reserved bits are read as 0. */ |
| {NOLDN, NULL, |
| {0x20,0x21,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x2a, |
| 0x2b,0x2c,0x2d,EOT}, |
| {0x06,0x01,0x19,0x34,0x00,0x00,MISC,0x00,0x00,0x00, |
| 0x00,0x00,0x08,EOT}}, |
| {0x0, "Floppy", |
| {0x30,0x60,0x61,0x70,0x74,0xf0,0xf2,0xf4,EOT}, |
| {0x01,0x03,0xf0,0x06,0x02,0x0e,0x03,0x00,EOT}}, |
| {0x1, "COM1", |
| {0x30,0x60,0x61,0x70,0xf0,EOT}, |
| {0x01,0x03,0xf8,0x04,0x00,EOT}}, |
| {0x2, "COM2", |
| {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, |
| {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}}, |
| {0x3, "Parallel port", |
| {0x30,0x60,0x61,0x70,0x74,0xf0,EOT}, |
| {0x01,0x03,0x78,0x07,0x03,0x42,EOT}}, |
| {0x4, "Hardware monitor", |
| {0x30,0x60,0x61,0x70,EOT}, |
| {0x01,0x02,0x95,0x00,EOT}}, |
| {0x5, "Keyboard", |
| {0x30,0x60,0x61,0x70,0x72,EOT}, |
| {0x01,0x00,0x60,0x00,0x00,EOT}}, |
| {0x6, "GPIO", |
| {0xf0,0xf1,0xf2,0xf3,0xe0,0xe1,0xe2,0xe3,0xd0,0xd1, |
| 0xd2,0xd3,0xc0,0xc1,0xc2,0xc3,0xb0,0xb1,0xb2,0xb3, |
| EOT}, |
| {0x00,0x0f,NANA,0x00,0x00,0xff,NANA,0x00,0x00,0xff, |
| NANA,0x00,0x00,0x0f,NANA,0x00,0x00,0x3f,NANA,0x00, |
| EOT}}, |
| {0x7, "VID", |
| {0x30,0x60,0x61, 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6, |
| 0xf7,EOT}, |
| {0x00,0x00,0x00, 0x00,0x00,MISC,0x00,NANA,0x00,0x00, |
| 0x00,EOT}}, |
| {0x8, "SPI", |
| {0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xfa, |
| 0xfb,0xfc,0xfd,0xfe,0xff,EOT}, |
| {0x10,0x04,0x01,NANA,0x00,0x00,0x00,NANA,0x00,0x00, |
| 0x00,0x00,0x00,0x00,0x00,EOT}}, |
| {0xa, "PME, ACPI", |
| {0x30,0xf0,0xf1,0xf4,0xf5,0xf7,EOT}, |
| {0x00,0x00,NANA,0x06,0x1c,0x01,EOT}}, |
| {EOT}}}, |
| {0x4103, "F71872F/FG / F71806F/FG", { /* Same ID? Datasheet typo? */ |
| {EOT}}}, |
| {0x4105, "F71882FG/F71883FG", { /* Same ID? Datasheet typo? */ |
| /* We assume reserved bits are read as 0. */ |
| {NOLDN, NULL, |
| {0x20,0x21,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x2a, |
| 0x2b,0x2c,0x2d,EOT}, |
| {0x05,0x41,0x19,0x34,0x00,0x00,0x00,0x00,0x00,0x00, |
| 0x00,0x08,0x08,EOT}}, |
| {0x0, "Floppy", |
| {0x30,0x60,0x61,0x70,0x74,0xf0,0xf2,0xf4,EOT}, |
| {0x01,0x03,0xf0,0x06,0x02,0x0e,0x03,0x00,EOT}}, |
| {0x1, "COM1", |
| {0x30,0x60,0x61,0x70,0xf0,EOT}, |
| {0x01,0x03,0xf8,0x04,0x00,EOT}}, |
| {0x2, "COM2", |
| {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, |
| {0x01,0x02,0xf8,0x03,0x00,0x04,EOT}}, |
| {0x3, "Parallel port", |
| {0x30,0x60,0x61,0x70,0x74,0xf0,EOT}, |
| {0x01,0x03,0x78,0x07,0x03,0x42,EOT}}, |
| {0x4, "Hardware monitor", |
| {0x30,0x60,0x61,0x70,EOT}, |
| {0x01,0x02,0x95,0x00,EOT}}, |
| {0x5, "Keyboard", |
| {0x30,0x60,0x61,0x70,0x72,0xf0,EOT}, |
| {0x01,0x00,0x60,0x00,0x00,0x83,EOT}}, |
| {0x6, "GPIO", |
| {0x70,0xe0,0xe1,0xe2,0xe3,0xd0,0xd1,0xd2,0xd3,0xc0, |
| 0xc1,0xc2,0xc3,0xb0,0xb1,0xb2,0xb3,0xf0,0xf1,0xf2, |
| 0xf3,EOT}, |
| {0x00,0x00,0xff,NANA,0x00,0x00,0xff,NANA,0x00,0x00, |
| 0x0f,NANA,0x00,0x00,0x0f,NANA,0x00,0x00,0xff,NANA, |
| 0x00,EOT}}, |
| {0x7, "VID", |
| {0x30,0x60,0x61,EOT}, |
| {0x00,0x00,0x00,EOT}}, |
| {0x7, "SPI", |
| {0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xfa, |
| 0xfb,0xfc,0xfd,0xfe,0xff,EOT}, |
| {0x10,0x04,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00, |
| 0x00,0x00,0x00,0x00,0x00,EOT}}, |
| {0xa, "PME, ACPI", |
| {0x30,0xf0,0xf1,0xf4,0xf5,EOT}, |
| {0x00,0x00,0x01,0x06,0x1c,EOT}}, |
| {EOT}}}, |
| {0x0604, "F71805F/FG", { |
| /* We assume reserved bits are read as 0. */ |
| {NOLDN, NULL, |
| {0x20,0x21,0x23,0x24,0x25,0x26,0x27,0x28,0x29,EOT}, |
| {0x04,0x06,0x19,0x34,0x00,0x00,0x3f,0x08,0x00,EOT}}, |
| {0x0, "Floppy", |
| {0x30,0x60,0x61,0x70,0x74,0xf0,0xf2,0xf4,EOT}, |
| {0x01,0x03,0xf0,0x06,0x02,0x0e,0x03,0x00,EOT}}, |
| {0x1, "COM1", |
| {0x30,0x60,0x61,0x70,0xf0,EOT}, |
| {0x01,0x03,0xf8,0x04,0x00,EOT}}, |
| {0x2, "COM2", |
| {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, |
| {0x01,0x02,0xf8,0x03,0x00,0x04,EOT}}, |
| {0x3, "Parallel port", |
| {0x30,0x60,0x61,0x70,0x74,0xf0,EOT}, |
| {0x01,0x03,0x78,0x07,0x03,0x42,EOT}}, |
| {0x4, "Hardware monitor", |
| {0x30,0x60,0x61,0x70,EOT}, |
| {0x00,0x02,0x95,0x00,EOT}}, |
| {0x6, "GPIO", |
| {0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8, |
| 0xe9,0xf0,0xf1,0xf3,0xf4,EOT}, |
| {0x00,0x00,0x00,NANA,0x00,0x00,0x00,0x00,0x00,0x00, |
| 0x00,0x00,NANA,0x00,NANA,EOT}}, |
| {0xa, "PME", |
| {0x30,0xf0,0xf1,EOT}, |
| {0x00,0x00,0x00,EOT}}, |
| {EOT}}}, |
| {0x0581, "F8000", { /* Fintek/ASUS F8000 */ |
| {EOT}}}, |
| {0x0802, "F81216D/DG", { |
| {NOLDN, NULL, |
| {0x25,0x2f,EOT}, |
| {0x00,RSVD,EOT}}, |
| {0x0, "UART1", |
| {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, |
| {NANA,NANA,NANA,NANA,0x00,0x40,EOT}}, |
| {0x1, "UART2", |
| {0x30,0x60,0x61,0x70,0xf0,EOT}, |
| {NANA,NANA,NANA,NANA,0x00,EOT}}, |
| {0x2, "UART3", |
| {0x30,0x60,0x61,0x70,0xf0,EOT}, |
| {NANA,NANA,NANA,NANA,0x00,EOT}}, |
| {0x3, "UART4", |
| {0x30,0x60,0x61,0x70,0xf0,EOT}, |
| {NANA,NANA,NANA,NANA,0x00,EOT}}, |
| {0x8, "WDT", |
| {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, |
| {0x00,NANA,NANA,NANA,NANA,NANA,EOT}}, |
| {EOT}}}, |
| {0x1602, "F81216AD", { |
| {NOLDN, NULL, |
| {0x25,0x27,EOT}, |
| {0x00,NANA,EOT}}, |
| {0x0, "UART1", |
| {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf4,0xf5,EOT}, |
| {NANA,NANA,NANA,NANA,0x00,0x40,0x00,0x00,EOT}}, |
| {0x1, "UART2", |
| {0x30,0x60,0x61,0x70,0xf0,0xf4,0xf5,EOT}, |
| {NANA,NANA,NANA,NANA,0x00,0x00,0x00,EOT}}, |
| {0x2, "UART3", |
| {0x30,0x60,0x61,0x70,0xf0,0xf4,0xf5,EOT}, |
| {NANA,NANA,NANA,NANA,0x00,0x00,0x00,EOT}}, |
| {0x3, "UART4", |
| {0x30,0x60,0x61,0x70,0xf0,0xf4,0xf5,EOT}, |
| {NANA,NANA,NANA,NANA,0x00,0x00,0x00,EOT}}, |
| {0x8, "WDT", |
| {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, |
| {0x00,NANA,NANA,NANA,NANA,NANA,EOT}}, |
| {EOT}}}, |
| {EOT} |
| }; |
| |
| void probe_idregs_fintek(uint16_t port) |
| { |
| uint16_t vid, did; |
| |
| probing_for("Fintek", "", port); |
| |
| enter_conf_mode_winbond_fintek_ite_8787(port); |
| |
| did = regval(port, DEVICE_ID_BYTE1_REG); |
| did |= (regval(port, DEVICE_ID_BYTE2_REG) << 8); |
| |
| vid = regval(port, VENDOR_ID_BYTE1_REG); |
| vid |= (regval(port, VENDOR_ID_BYTE2_REG) << 8); |
| |
| if (vid != FINTEK_VENDOR_ID || superio_unknown(reg_table, did)) { |
| if (verbose) |
| printf(NOTFOUND "vid=0x%04x, id=0x%04x\n", vid, did); |
| exit_conf_mode_winbond_fintek_ite_8787(port); |
| return; |
| } |
| |
| printf("Found Fintek %s (vid=0x%04x, id=0x%04x) at 0x%x\n", |
| get_superio_name(reg_table, did), vid, did, port); |
| chip_found = 1; |
| |
| dump_superio("Fintek", reg_table, port, did, LDN_SEL); |
| |
| exit_conf_mode_winbond_fintek_ite_8787(port); |
| } |
| |
| |
| void probe_idregs_fintek_alternative(uint16_t port) |
| { |
| uint16_t vid, did; |
| |
| probing_for("Fintek", "", port); |
| |
| enter_conf_mode_fintek_7777(port); |
| |
| did = regval(port, DEVICE_ID_BYTE1_REG); |
| did |= (regval(port, DEVICE_ID_BYTE2_REG) << 8); |
| |
| vid = regval(port, VENDOR_ID_BYTE1_REG); |
| vid |= (regval(port, VENDOR_ID_BYTE2_REG) << 8); |
| |
| if (vid != FINTEK_VENDOR_ID || superio_unknown(reg_table, did)) { |
| if (verbose) |
| printf(NOTFOUND "vid=0x%04x, id=0x%04x\n", vid, did); |
| exit_conf_mode_fintek_7777(port); |
| return; |
| } |
| |
| printf("Found Fintek %s (vid=0x%04x, id=0x%04x) at 0x%x\n", |
| get_superio_name(reg_table, did), vid, did, port); |
| chip_found = 1; |
| |
| dump_superio("Fintek", reg_table, port, did, LDN_SEL); |
| |
| exit_conf_mode_fintek_7777(port); |
| } |
| |
| void print_fintek_chips(void) |
| { |
| print_vendor_chips("Fintek", reg_table); |
| } |