| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef _X86_MP_H_ |
| #define _X86_MP_H_ |
| |
| #include <cpu/x86/smm.h> |
| #include <types.h> |
| |
| #define CACHELINE_SIZE 64 |
| |
| struct cpu_info; |
| struct bus; |
| |
| static inline void mfence(void) |
| { |
| /* mfence came with the introduction of SSE2. */ |
| if (CONFIG(SSE2)) |
| __asm__ __volatile__("mfence\t\n": : :"memory"); |
| else |
| __asm__ __volatile__("lock; addl $0,0(%%esp)": : : "memory"); |
| } |
| |
| /* The sequence of the callbacks are in calling order. */ |
| struct mp_ops { |
| /* |
| * Optionally provide a callback prior to kicking off MP |
| * startup. This callback is done prior to loading the SIPI |
| * vector but after gathering the MP state information. Please |
| * see the sequence below. |
| */ |
| void (*pre_mp_init)(void); |
| /* |
| * Return the number of logical x86 execution contexts that |
| * need to be brought out of SIPI state as well as have SMM |
| * handlers installed. |
| */ |
| int (*get_cpu_count)(void); |
| /* |
| * Optionally fill in permanent SMM region and save state size. If |
| * this callback is not present no SMM handlers will be installed. |
| * The perm_smsize is the size available to house the permanent SMM |
| * handler. |
| */ |
| void (*get_smm_info)(uintptr_t *perm_smbase, size_t *perm_smsize, |
| size_t *smm_save_state_size); |
| /* |
| * Optionally fill in pointer to microcode and indicate if the APs |
| * can load the microcode in parallel. |
| */ |
| void (*get_microcode_info)(const void **microcode, int *parallel); |
| /* |
| * Optionally provide a callback prior to the APs starting SMM |
| * relocation or CPU driver initialization. However, note that |
| * this callback is called after SMM handlers have been loaded. |
| */ |
| void (*pre_mp_smm_init)(void); |
| /* |
| * Optional function to use to trigger SMM to perform relocation. If |
| * not provided, smm_initiate_relocation() is used. |
| */ |
| void (*per_cpu_smm_trigger)(void); |
| /* |
| * This function is called while each CPU is in the SMM relocation |
| * handler. Its primary purpose is to adjust the SMBASE for the |
| * permanent handler. The parameters passed are the current cpu |
| * running the relocation handler, current SMBASE of relocation handler, |
| * and the pre-calculated staggered CPU SMBASE address of the permanent |
| * SMM handler. |
| */ |
| void (*relocation_handler)(int cpu, uintptr_t curr_smbase, |
| uintptr_t staggered_smbase); |
| /* |
| * Optionally provide a callback that is called after the APs |
| * and the BSP have gone through the initialion sequence. |
| */ |
| void (*post_mp_init)(void); |
| }; |
| |
| /* |
| * The mp_ops argument is used to drive the multiprocess initialization. Unless |
| * otherwise stated each callback is called on the BSP only. The sequence of |
| * operations is the following: |
| * 1. pre_mp_init() |
| * 2. get_cpu_count() |
| * 3. get_smm_info() |
| * 4. get_microcode_info() |
| * 5. adjust_cpu_apic_entry() for each number of get_cpu_count() |
| * 6. pre_mp_smm_init() |
| * 7. per_cpu_smm_trigger() in parallel for all cpus which calls |
| * relocation_handler() in SMM. |
| * 8. mp_initialize_cpu() for each cpu |
| * 9. post_mp_init() |
| */ |
| enum cb_err mp_init_with_smm(struct bus *cpu_bus, const struct mp_ops *mp_ops); |
| |
| enum { |
| /* Function runs on all cores (both BSP and APs) */ |
| MP_RUN_ON_ALL_CPUS, |
| /* Need to specify cores (only on APs) numbers */ |
| }; |
| |
| /* |
| * After APs are up and PARALLEL_MP_AP_WORK is enabled one can issue work |
| * to all the APs to perform. Currently the BSP is the only CPU that is allowed |
| * to issue work. i.e. the APs should not call any of these functions. |
| * |
| * Input parameter expire_us <= 0 to specify an infinite timeout. |
| * logical_cpu_num = MP_RUN_ON_ALL_CPUS to execute function over all cores (BSP |
| * + APs) else specified AP number using logical_cpu_num. |
| */ |
| enum cb_err mp_run_on_aps(void (*func)(void *), void *arg, int logical_cpu_num, |
| long expire_us); |
| |
| /* |
| * Runs func on all APs excluding BSP, with a provision to run calls in parallel |
| * or serially per AP. |
| */ |
| enum cb_err mp_run_on_all_aps(void (*func)(void *), void *arg, long expire_us, |
| bool run_parallel); |
| |
| /* Like mp_run_on_aps() but also runs func on BSP. */ |
| enum cb_err mp_run_on_all_cpus(void (*func)(void *), void *arg); |
| |
| /* Like mp_run_on_all_cpus but make sure all APs finish executing the |
| function call. The time limit on a function call is 1 second. */ |
| enum cb_err mp_run_on_all_cpus_synchronously(void (*func)(void *), void *arg); |
| |
| /* |
| * Park all APs to prepare for OS boot. This is handled automatically |
| * by the coreboot infrastructure. |
| */ |
| enum cb_err mp_park_aps(void); |
| |
| /* |
| * SMM helpers to use with initializing CPUs. |
| */ |
| |
| /* Send SMI to self without any serialization. */ |
| void smm_initiate_relocation_parallel(void); |
| /* Send SMI to self with single execution. */ |
| void smm_initiate_relocation(void); |
| |
| #endif /* _X86_MP_H_ */ |