intel/i82801ix: new southbridge, ICH9
Add support for ICH9 southbridge
Change-Id: I70612431101bf48d9dcc96ee1b37d257c9ad2ee2
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1690
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
diff --git a/src/southbridge/intel/i82801ix/early_init.c b/src/southbridge/intel/i82801ix/early_init.c
new file mode 100644
index 0000000..66cdf03
--- /dev/null
+++ b/src/southbridge/intel/i82801ix/early_init.c
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 secunet Security Networks AG
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include "i82801ix.h"
+
+void i82801ix_early_init(void)
+{
+ const device_t d31f0 = PCI_DEV(0, 0x1f, 0);
+
+ /* Set up RCBA. */
+ pci_write_config32(d31f0, D31F0_RCBA, DEFAULT_RCBA | 1);
+
+ /* Set up PMBASE. */
+ pci_write_config32(d31f0, D31F0_PMBASE, DEFAULT_PMBASE | 1);
+ /* Enable PMBASE. */
+ pci_write_config8(d31f0, D31F0_ACPI_CNTL, 0x80);
+
+ /* Set up GPIOBASE. */
+ pci_write_config32(d31f0, D31F0_GPIO_BASE, DEFAULT_GPIOBASE);
+ /* Enable GPIO. */
+ pci_write_config8(d31f0, D31F0_GPIO_CNTL,
+ pci_read_config8(d31f0, D31F0_GPIO_CNTL) | 0x10);
+
+ /* Reset watchdog. */
+ outw(0x0008, DEFAULT_TCOBASE + 0x04); /* R/WC, clear TCO caused SMI. */
+ outw(0x0002, DEFAULT_TCOBASE + 0x06); /* R/WC, clear second timeout. */
+
+ /* Enable upper 128bytes of CMOS. */
+ RCBA32(0x3400) = (1 << 2);
+
+ /* Initialize power manangement initialization
+ register early as it affects reboot behavior. */
+ /* Bit 20 activates global reset of host and ME on cf9 writes of 0x6
+ and 0xe (required if ME is disabled but present), bit 31 locks it.
+ The other bits are 'must write'. */
+ u8 reg8 = pci_read_config8(d31f0, 0xac);
+ reg8 |= (1 << 31) | (1 << 30) | (1 << 20) | (3 << 8);
+ pci_write_config8(d31f0, 0xac, reg8);
+
+ /* TODO: If RTC power failed, reset RTC state machine
+ (set, then reset RTC 0x0b bit7) */
+
+ /* TODO: Check power state bits in GEN_PMCON_2 (D31F0 0xa2)
+ before they get cleared. */
+}
+