| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <ec/google/chromeec/ec.h> |
| #include <baseboard/variants.h> |
| #include <boardid.h> |
| #include <cbfs.h> |
| #include <gpio.h> |
| #include <smbios.h> |
| #include <variant/gpio.h> |
| #include <device/mmio.h> |
| #include <device/pci.h> |
| #include <device/pci_ops.h> |
| #include <drivers/generic/bayhub/bh720.h> |
| |
| uint32_t sku_id(void) |
| { |
| static int sku = -1; |
| |
| if (sku == -1) |
| sku = google_chromeec_get_sku_id(); |
| |
| return sku; |
| } |
| |
| uint8_t variant_board_sku(void) |
| { |
| return sku_id(); |
| } |
| |
| void variant_mainboard_suspend_resume(void) |
| { |
| /* Enable backlight - GPIO 133 active low */ |
| gpio_set(GPIO_133, 0); |
| } |
| |
| void board_bh720(struct device *dev) |
| { |
| u32 sdbar; |
| u32 bh720_pcr_data; |
| |
| sdbar = pci_read_config32(dev, PCI_BASE_ADDRESS_1); |
| |
| /* Enable Memory Access Function */ |
| write32((void *)(sdbar + BH720_MEM_ACCESS_EN), 0x40000000); |
| write32((void *)(sdbar + BH720_MEM_RW_DATA), 0x80000000); |
| write32((void *)(sdbar + BH720_MEM_RW_ADR), 0x800000D0); |
| |
| /* Set EMMC VCCQ 1.8V PCR 0x308[4] */ |
| write32((void *)(sdbar + BH720_MEM_RW_ADR), |
| BH720_MEM_RW_READ | BH720_PCR_EMMC_SETTING); |
| bh720_pcr_data = read32((void *)(sdbar + BH720_MEM_RW_DATA)); |
| write32((void *)(sdbar + BH720_MEM_RW_DATA), |
| bh720_pcr_data | BH720_PCR_EMMC_SETTING_1_8V); |
| write32((void *)(sdbar + BH720_MEM_RW_ADR), |
| BH720_MEM_RW_WRITE | BH720_PCR_EMMC_SETTING); |
| |
| /* Set Base clock to 200MHz(PCR 0x304[31:16] = 0x2510) */ |
| write32((void *)(sdbar + BH720_MEM_RW_ADR), |
| BH720_MEM_RW_READ | BH720_PCR_DrvStrength_PLL); |
| bh720_pcr_data = read32((void *)(sdbar + BH720_MEM_RW_DATA)); |
| bh720_pcr_data &= 0x0000FFFF; |
| bh720_pcr_data |= 0x2510 << 16; |
| write32((void *)(sdbar + BH720_MEM_RW_DATA), bh720_pcr_data); |
| write32((void *)(sdbar + BH720_MEM_RW_ADR), |
| BH720_MEM_RW_WRITE | BH720_PCR_DrvStrength_PLL); |
| |
| /* Use PLL Base clock PCR 0x3E4[22] = 1 */ |
| write32((void *)(sdbar + BH720_MEM_RW_ADR), |
| BH720_MEM_RW_READ | BH720_PCR_CSR); |
| bh720_pcr_data = read32((void *)(sdbar + BH720_MEM_RW_DATA)); |
| write32((void *)(sdbar + BH720_MEM_RW_DATA), |
| bh720_pcr_data | BH720_PCR_CSR_EMMC_MODE_SEL); |
| write32((void *)(sdbar + BH720_MEM_RW_ADR), |
| BH720_MEM_RW_WRITE | BH720_PCR_CSR); |
| |
| /* Disable Memory Access */ |
| write32((void *)(sdbar + BH720_MEM_RW_DATA), 0x80000001); |
| write32((void *)(sdbar + BH720_MEM_RW_ADR), 0x800000D0); |
| write32((void *)(sdbar + BH720_MEM_ACCESS_EN), 0x80000000); |
| } |
| |
| const char *smbios_mainboard_manufacturer(void) |
| { |
| static char oem_bin_data[11]; |
| static const char *manuf; |
| |
| if (!CONFIG(USE_OEM_BIN)) |
| return CONFIG_MAINBOARD_SMBIOS_MANUFACTURER; |
| |
| if (manuf) |
| return manuf; |
| |
| if (cbfs_load("oem.bin", oem_bin_data, sizeof(oem_bin_data) - 1)) |
| manuf = &oem_bin_data[0]; |
| else |
| manuf = CONFIG_MAINBOARD_SMBIOS_MANUFACTURER; |
| |
| return manuf; |
| } |