| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2001 Eric W.Biederman<ebiderman@lnxi.com> |
| * |
| * Copyright (C) 2006 AMD |
| * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. |
| * |
| * Copyright (C) 2006 MSI |
| * Written by bxshi <bingxunshi@gmail.com> for MSI. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/console.h> |
| #include <arch/smp/mpspec.h> |
| #include <arch/io.h> |
| #include <device/pci.h> |
| #include <string.h> |
| #include <stdint.h> |
| #if CONFIG_LOGICAL_CPUS==1 |
| #include <cpu/amd/multicore.h> |
| #endif |
| |
| #include <cpu/amd/amdk8_sysconf.h> |
| |
| #include "mb_sysconf.h" |
| |
| |
| |
| static void *smp_write_config_table(void *v) |
| { |
| static const char sig[4] = "PCMP"; |
| static const char oem[8] = "MSI "; |
| static const char productid[12] = "MS9185 "; |
| struct mp_config_table *mc; |
| |
| unsigned char bus_num; |
| int i; |
| struct mb_sysconf_t *m; |
| |
| mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); |
| memset(mc, 0, sizeof(*mc)); |
| |
| memcpy(mc->mpc_signature, sig, sizeof(sig)); |
| mc->mpc_length = sizeof(*mc); /* initially just the header */ |
| mc->mpc_spec = 0x04; |
| mc->mpc_checksum = 0; /* not yet computed */ |
| memcpy(mc->mpc_oem, oem, sizeof(oem)); |
| memcpy(mc->mpc_productid, productid, sizeof(productid)); |
| mc->mpc_oemptr = 0; |
| mc->mpc_oemsize = 0; |
| mc->mpc_entry_count = 0; /* No entries yet... */ |
| mc->mpc_lapic = LAPIC_ADDR; |
| mc->mpe_length = 0; |
| mc->mpe_checksum = 0; |
| mc->reserved = 0; |
| |
| smp_write_processors(mc); |
| |
| get_bus_conf(); |
| m = sysconf.mb; |
| |
| /*Bus: Bus ID Type*/ |
| /* define bus and isa numbers */ |
| for(bus_num = 0; bus_num < m->bus_isa; bus_num++) { |
| smp_write_bus(mc, bus_num, "PCI "); |
| } |
| smp_write_bus(mc, m->bus_isa, "ISA "); |
| |
| /*I/O APICs: APIC ID Version State Address*/ |
| { |
| device_t dev = 0; |
| struct resource *res; |
| for(i=0; i<3; i++) { |
| dev = dev_find_device(0x1166, 0x0235, dev); |
| if (dev) { |
| res = find_resource(dev, PCI_BASE_ADDRESS_0); |
| if (res) { |
| smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base); |
| } |
| } |
| } |
| |
| } |
| |
| /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ |
| smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_bcm5785[0], 0x0); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_bcm5785[0], 0x1); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_bcm5785[0], 0x2); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_bcm5785[0], 0x3); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_bcm5785[0], 0x4); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x5, m->apicid_bcm5785[0], 0x5); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_bcm5785[0], 0x6); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_bcm5785[0], 0x7); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_bcm5785[0], 0x8); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x9, m->apicid_bcm5785[0], 0x9); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_bcm5785[0], 0xc); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_bcm5785[0], 0xd); |
| |
| //IDE |
| outb(0x02, 0xc00); outb(0x0e, 0xc01); |
| |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // IDE |
| |
| //SATA |
| outb(0x07, 0xc00); outb(0x0f, 0xc01); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xf); |
| |
| //USB |
| outb(0x01, 0xc00); outb(0x0a, 0xc01); |
| for(i=0;i<3;i++) { |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, m->apicid_bcm5785[0], 0xa); // |
| } |
| |
| |
| |
| /* enable int */ |
| /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ |
| { |
| device_t dev; |
| dev = dev_find_device(0x1166, 0x0205, 0); |
| if(dev) { |
| uint32_t dword; |
| dword = pci_read_config32(dev, 0x6c); |
| dword |= (1<<4); // enable interrupts |
| pci_write_config32(dev, 0x6c, dword); |
| } |
| } |
| |
| //First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0 |
| // AIC 8130 Galileo Technology... |
| for(i=0;i<4;i++) { |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (6<<2)|i, m->apicid_bcm5785[1], 2 + (1+i)%4); // |
| } |
| |
| |
| //pci slot (on bcm5785) |
| for(i=0;i<4;i++) { |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (5<<2)|i, m->apicid_bcm5785[1], 8+i%4); // |
| } |
| |
| |
| //onboard ati |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (4<<2)|0, m->apicid_bcm5785[1], 0x1); |
| |
| //PCI-X on bcm5780 |
| for(i=0;i<4;i++) { |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[1], (4<<2)|i, m->apicid_bcm5785[1], 2 + (0+i)%4); // |
| } |
| |
| //onboard Broadcom |
| for(i=0;i<2;i++) { |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[2], (4<<2)|i, m->apicid_bcm5785[1], 0xa + (0+i)%4); // |
| } |
| |
| |
| // First PCI-E x8 |
| for(i=0;i<4;i++) { |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[5], (0<<2)|i, m->apicid_bcm5785[1], 0xe); // |
| } |
| |
| |
| // Second PCI-E x8 |
| for(i=0;i<4;i++) { |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[3], (0<<2)|i, m->apicid_bcm5785[1], 0xc); // |
| } |
| |
| // Third PCI-E x1 |
| for(i=0;i<4;i++) { |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[4], (0<<2)|i, m->apicid_bcm5785[1], 0xd); // |
| } |
| |
| /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ |
| smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); |
| smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1); |
| /* There is no extension information... */ |
| |
| /* Compute the checksums */ |
| mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); |
| mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); |
| printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", |
| mc, smp_next_mpe_entry(mc)); |
| return smp_next_mpe_entry(mc); |
| } |
| |
| unsigned long write_smp_table(unsigned long addr) |
| { |
| void *v; |
| v = smp_write_floating_table(addr); |
| return (unsigned long)smp_write_config_table(v); |
| } |