| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright 2014 Google Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| /* |
| * MIPI DSI Bus |
| * |
| * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. |
| * Andrzej Hajda <a.hajda@samsung.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, |
| * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR |
| * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE |
| * USE OR OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| #include <console/console.h> |
| #include <arch/io.h> |
| #include <stdint.h> |
| #include <lib.h> |
| #include <stdlib.h> |
| #include <delay.h> |
| #include <string.h> |
| #include <soc/addressmap.h> |
| #include <soc/clock.h> |
| #include <device/device.h> |
| #include <soc/nvidia/tegra/types.h> |
| #include <soc/display.h> |
| #include <soc/mipi_dsi.h> |
| #include <soc/mipi_display.h> |
| #include <soc/tegra_dsi.h> |
| |
| struct mipi_dsi_device mipi_dsi_device_data[NUM_DSI] = { |
| { |
| .master = NULL, |
| .slave = &mipi_dsi_device_data[DSI_B], |
| }, |
| { |
| .master = &mipi_dsi_device_data[DSI_A], |
| .slave = NULL, |
| }, |
| }; |
| |
| static struct mipi_dsi_device * |
| mipi_dsi_device_alloc(struct mipi_dsi_host *host) |
| { |
| static int index = 0; |
| struct mipi_dsi_device *dsi; |
| |
| if (index >= NUM_DSI) |
| return (void *)-EPTR; |
| |
| dsi = &mipi_dsi_device_data[index++]; |
| dsi->host = host; |
| return dsi; |
| } |
| |
| static struct mipi_dsi_device * |
| of_mipi_dsi_device_add(struct mipi_dsi_host *host) |
| { |
| struct mipi_dsi_device *dsi; |
| u32 reg = 0; |
| |
| dsi = mipi_dsi_device_alloc(host); |
| if (IS_ERR_PTR(dsi)) { |
| printk(BIOS_ERR, "failed to allocate DSI device\n"); |
| return dsi; |
| } |
| |
| dsi->channel = reg; |
| host->dev = (void *)dsi; |
| |
| return dsi; |
| } |
| |
| int mipi_dsi_host_register(struct mipi_dsi_host *host) |
| { |
| of_mipi_dsi_device_add(host); |
| return 0; |
| } |
| |
| /** |
| * mipi_dsi_attach - attach a DSI device to its DSI host |
| * @dsi: DSI peripheral |
| */ |
| int mipi_dsi_attach(struct mipi_dsi_device *dsi) |
| { |
| const struct mipi_dsi_host_ops *ops = dsi->host->ops; |
| |
| if (!ops || !ops->attach) |
| return -ENOSYS; |
| |
| return ops->attach(dsi->host, dsi); |
| } |
| |
| /** |
| * mipi_dsi_detach - detach a DSI device from its DSI host |
| * @dsi: DSI peripheral |
| */ |
| int mipi_dsi_detach(struct mipi_dsi_device *dsi) |
| { |
| const struct mipi_dsi_host_ops *ops = dsi->host->ops; |
| |
| if (!ops || !ops->detach) |
| return -ENOSYS; |
| |
| return ops->detach(dsi->host, dsi); |
| } |
| |
| /** |
| * mipi_dsi_enslave() - use a MIPI DSI peripheral as slave for dual-channel |
| * operation |
| * @master: master DSI peripheral device |
| * @slave: slave DSI peripheral device |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int mipi_dsi_enslave(struct mipi_dsi_device *master, |
| struct mipi_dsi_device *slave) |
| { |
| int err = 0; |
| |
| slave->master = master; |
| master->slave = slave; |
| |
| if (master->ops && master->ops->enslave) |
| err = master->ops->enslave(master, slave); |
| |
| return err; |
| } |
| |
| /** |
| * mipi_dsi_liberate() - stop using a MIPI DSI peripheral as slave for dual- |
| * channel operation |
| * @master: master DSI peripheral device |
| * @slave: slave DSI peripheral device |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int mipi_dsi_liberate(struct mipi_dsi_device *master, |
| struct mipi_dsi_device *slave) |
| { |
| int err = 0; |
| |
| if (master->ops && master->ops->liberate) |
| err = master->ops->liberate(master, slave); |
| |
| master->slave = NULL; |
| slave->master = NULL; |
| |
| return err; |
| } |
| |
| /** |
| * mipi_dsi_dcs_write() - send DCS write command |
| * @dsi: DSI peripheral device |
| * @cmd: DCS command |
| * @data: buffer containing the command payload |
| * @len: command payload length |
| * |
| * This function will automatically choose the right data type depending on |
| * the command payload length. |
| * |
| * Return: The number of bytes successfully transmitted or a negative error |
| * code on failure. |
| */ |
| ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, |
| const void *data, size_t len) |
| { |
| struct mipi_dsi_msg msg; |
| ssize_t err; |
| size_t size; |
| |
| u8 buffer[MAX_DSI_HOST_FIFO_DEPTH + 4]; |
| u8 *tx = buffer; |
| |
| if (len > MAX_DSI_HOST_FIFO_DEPTH) { |
| printk(BIOS_ERR, "%s: Error: too large payload length: %zu\n", |
| __func__, len); |
| |
| return -EINVAL; |
| } |
| |
| if (len > 0) { |
| unsigned int offset = 0; |
| |
| /* |
| * DCS long write packets contain the word count in the header |
| * bytes 1 and 2 and have a payload containing the DCS command |
| * byte folowed by word count minus one bytes. |
| * |
| * DCS short write packets encode the DCS command and up to |
| * one parameter in header bytes 1 and 2. |
| */ |
| if (len > 1) |
| size = 3 + len; |
| else |
| size = 1 + len; |
| |
| /* write word count to header for DCS long write packets */ |
| if (len > 1) { |
| tx[offset++] = ((1 + len) >> 0) & 0xff; |
| tx[offset++] = ((1 + len) >> 8) & 0xff; |
| } |
| |
| /* write the DCS command byte followed by the payload */ |
| tx[offset++] = cmd; |
| memcpy(tx + offset, data, len); |
| } else { |
| tx = &cmd; |
| size = 1; |
| } |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.flags = MIPI_DSI_MSG_USE_LPM; |
| msg.channel = dsi->channel; |
| msg.tx_len = size; |
| msg.tx_buf = tx; |
| |
| switch (len) { |
| case 0: |
| msg.type = MIPI_DSI_DCS_SHORT_WRITE; |
| break; |
| case 1: |
| msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM; |
| break; |
| default: |
| msg.type = MIPI_DSI_DCS_LONG_WRITE; |
| break; |
| } |
| |
| err = dsi->host->ops->transfer(dsi->host, &msg); |
| |
| return err; |
| } |
| |
| /** |
| * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display |
| * module |
| * @dsi: DSI peripheral device |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi) |
| { |
| ssize_t err; |
| |
| err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| /** |
| * mipi_dsi_dcs_set_display_on() - start displaying the image data on the |
| * display device |
| * @dsi: DSI peripheral device |
| * |
| * Return: 0 on success or a negative error code on failure |
| */ |
| int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi) |
| { |
| ssize_t err; |
| |
| err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| /** |
| * mipi_dsi_dcs_set_column_address() - define the column extent of the frame |
| * memory accessed by the host processor |
| * @dsi: DSI peripheral device |
| * @start: first column of frame memory |
| * @end: last column of frame memory |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, |
| u16 end) |
| { |
| u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff }; |
| ssize_t err; |
| |
| err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload, |
| sizeof(payload)); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| /** |
| * mipi_dsi_dcs_set_page_address() - define the page extent of the frame |
| * memory accessed by the host processor |
| * @dsi: DSI peripheral device |
| * @start: first page of frame memory |
| * @end: last page of frame memory |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, |
| u16 end) |
| { |
| u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff }; |
| ssize_t err; |
| |
| err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload, |
| sizeof(payload)); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| /** |
| * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect |
| * output signal on the TE signal line. |
| * @dsi: DSI peripheral device |
| * @mode: the Tearing Effect Output Line mode |
| * |
| * Return: 0 on success or a negative error code on failure |
| */ |
| int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, |
| enum mipi_dsi_dcs_tear_mode mode) |
| { |
| u8 value = mode; |
| ssize_t err; |
| |
| err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value, |
| sizeof(value)); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| /** |
| * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image |
| * data used by the interface |
| * @dsi: DSI peripheral device |
| * @format: pixel format |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format) |
| { |
| ssize_t err; |
| |
| err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format, |
| sizeof(format)); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| /** |
| * mipi_dsi_dcs_set_address_mode() - sets the data order for forward transfers |
| * from the host to the peripheral |
| * @dsi: DSI peripheral device |
| * @reverse_page_address: reverses the page addressing to bottom->top |
| * @reverse_col_address: reverses the column addressing to right->left |
| * @reverse_page_col_address: reverses the page/column addressing order |
| * @refresh_from_bottom: refresh the display bottom to top |
| * @reverse_rgb: send pixel data bgr instead of rgb |
| * @latch_right_to_left: latch the incoming display data right to left |
| * @flip_horizontal: flip the image horizontally, left to right |
| * @flip_vertical: flip the image vertically, top to bottom |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int mipi_dsi_dcs_set_address_mode(struct mipi_dsi_device *dsi, |
| bool reverse_page_address, |
| bool reverse_col_address, |
| bool reverse_page_col_address, |
| bool refresh_from_bottom, |
| bool reverse_rgb, |
| bool latch_right_to_left, |
| bool flip_horizontal, |
| bool flip_vertical) |
| { |
| ssize_t err; |
| u8 data; |
| |
| data = ((flip_vertical ? 1 : 0) << 0) | |
| ((flip_horizontal ? 1 : 0) << 1) | |
| ((latch_right_to_left ? 1 : 0) << 2) | |
| ((reverse_rgb ? 1 : 0) << 3) | |
| ((refresh_from_bottom ? 1 : 0) << 4) | |
| ((reverse_page_col_address ? 1 : 0) << 5) | |
| ((reverse_col_address ? 1 : 0) << 6) | |
| ((reverse_page_address ? 1 : 0) << 7); |
| |
| err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_ADDRESS_MODE, &data, 1); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |