| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <acpi/acpi.h> |
| #include <cbmem.h> |
| #include <console/uart.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ids.h> |
| #include <device/pci_ops.h> |
| #include <intelblocks/lpss.h> |
| #include <intelblocks/uart.h> |
| #include <soc/pci_devs.h> |
| #include <soc/iomap.h> |
| #include <soc/nvs.h> |
| |
| #define UART_PCI_ENABLE (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER) |
| #define UART_CONSOLE_INVALID_INDEX 0xFF |
| |
| extern const struct uart_gpio_pad_config uart_gpio_pads[]; |
| extern const int uart_max_index; |
| |
| static void uart_lpss_init(const struct device *dev, uintptr_t baseaddr) |
| { |
| /* Ensure controller is in D0 state */ |
| lpss_set_power_state(dev, STATE_D0); |
| |
| /* Take UART out of reset */ |
| lpss_reset_release(baseaddr); |
| |
| /* Set M and N divisor inputs and enable clock */ |
| lpss_clk_update(baseaddr, CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL, |
| CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL); |
| } |
| |
| #if CONFIG(INTEL_LPSS_UART_FOR_CONSOLE) |
| uintptr_t uart_platform_base(int idx) |
| { |
| if (idx == CONFIG_UART_FOR_CONSOLE) |
| return CONFIG_CONSOLE_UART_BASE_ADDRESS; |
| return 0; |
| } |
| #endif |
| |
| static int uart_get_valid_index(void) |
| { |
| int index; |
| |
| for (index = 0; index < uart_max_index; index++) { |
| if (uart_gpio_pads[index].console_index == |
| CONFIG_UART_FOR_CONSOLE) |
| return index; |
| } |
| /* For valid index, code should not reach here */ |
| return UART_CONSOLE_INVALID_INDEX; |
| } |
| |
| void uart_common_init(const struct device *device, uintptr_t baseaddr) |
| { |
| #if defined(__SIMPLE_DEVICE__) |
| pci_devfn_t dev = PCI_BDF(device); |
| #else |
| const struct device *dev = device; |
| #endif |
| |
| /* Set UART base address */ |
| pci_write_config32(dev, PCI_BASE_ADDRESS_0, baseaddr); |
| |
| /* Enable memory access and bus master */ |
| pci_write_config16(dev, PCI_COMMAND, UART_PCI_ENABLE); |
| |
| uart_lpss_init(device, baseaddr); |
| } |
| |
| const struct device *uart_get_device(void) |
| { |
| /* |
| * This function will get called even if INTEL_LPSS_UART_FOR_CONSOLE |
| * config option is not selected. |
| * By default return NULL in this case to avoid compilation errors. |
| */ |
| if (!CONFIG(INTEL_LPSS_UART_FOR_CONSOLE)) |
| return NULL; |
| |
| int console_index = uart_get_valid_index(); |
| |
| if (console_index != UART_CONSOLE_INVALID_INDEX) |
| return soc_uart_console_to_device(CONFIG_UART_FOR_CONSOLE); |
| else |
| return NULL; |
| } |
| |
| bool uart_is_controller_initialized(void) |
| { |
| uintptr_t base; |
| const struct device *dev_uart = uart_get_device(); |
| |
| if (!dev_uart) |
| return false; |
| |
| #if defined(__SIMPLE_DEVICE__) |
| pci_devfn_t dev = PCI_BDF(dev_uart); |
| #else |
| const struct device *dev = dev_uart; |
| #endif |
| |
| base = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xFFF; |
| if (!base) |
| return false; |
| |
| if ((pci_read_config16(dev, PCI_COMMAND) & UART_PCI_ENABLE) |
| != UART_PCI_ENABLE) |
| return false; |
| |
| return !lpss_is_controller_in_reset(base); |
| } |
| |
| static void uart_configure_gpio_pads(void) |
| { |
| int index = uart_get_valid_index(); |
| |
| if (index != UART_CONSOLE_INVALID_INDEX) |
| gpio_configure_pads(uart_gpio_pads[index].gpios, |
| MAX_GPIO_PAD_PER_UART); |
| } |
| |
| void uart_bootblock_init(void) |
| { |
| const struct device *dev_uart; |
| |
| dev_uart = uart_get_device(); |
| |
| if (!dev_uart) |
| return; |
| |
| /* Program UART BAR0, command, reset and clock register */ |
| uart_common_init(dev_uart, CONFIG_CONSOLE_UART_BASE_ADDRESS); |
| |
| /* Configure the 2 pads per UART. */ |
| uart_configure_gpio_pads(); |
| } |
| |
| #if ENV_RAMSTAGE |
| |
| static void uart_read_resources(struct device *dev) |
| { |
| pci_dev_read_resources(dev); |
| |
| /* Set the configured UART base address for the debug port */ |
| if (CONFIG(INTEL_LPSS_UART_FOR_CONSOLE) && |
| uart_is_debug_controller(dev)) { |
| struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0); |
| /* Need to set the base and size for the resource allocator. */ |
| res->base = CONFIG_CONSOLE_UART_BASE_ADDRESS; |
| res->size = 0x1000; |
| res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | |
| IORESOURCE_FIXED; |
| } |
| } |
| |
| /* |
| * Check if UART debug port controller needs to be initialized on resume. |
| * |
| * Returns: |
| * true = when SoC wants debug port initialization on resume |
| * false = otherwise |
| */ |
| static bool pch_uart_init_debug_controller_on_resume(void) |
| { |
| global_nvs_t *gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); |
| |
| if (gnvs) |
| return !!gnvs->uior; |
| |
| return false; |
| } |
| |
| bool uart_is_debug_controller(struct device *dev) |
| { |
| return dev == uart_get_device(); |
| } |
| |
| /* |
| * This is a workaround to enable UART controller for the debug port if: |
| * 1. CONSOLE_SERIAL is not enabled in coreboot, and |
| * 2. This boot is S3 resume, and |
| * 3. SoC wants to initialize debug UART controller. |
| * |
| * This workaround is required because Linux kernel hangs on resume if console |
| * is not enabled in coreboot, but it is enabled in kernel and not suspended. |
| */ |
| static bool uart_controller_needs_init(struct device *dev) |
| { |
| /* |
| * If coreboot has CONSOLE_SERIAL enabled, the skip re-initializing |
| * controller here. |
| */ |
| if (CONFIG(CONSOLE_SERIAL)) |
| return false; |
| |
| /* If this device does not correspond to debug port, then skip. */ |
| if (!uart_is_debug_controller(dev)) |
| return false; |
| |
| /* Initialize UART controller only on S3 resume. */ |
| if (!acpi_is_wakeup_s3()) |
| return false; |
| |
| /* |
| * check if SOC wants to initialize UART on resume |
| */ |
| return pch_uart_init_debug_controller_on_resume(); |
| } |
| |
| static void uart_common_enable_resources(struct device *dev) |
| { |
| pci_dev_enable_resources(dev); |
| |
| if (uart_controller_needs_init(dev)) { |
| uintptr_t base; |
| |
| base = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xFFF; |
| if (base) |
| uart_lpss_init(dev, base); |
| } |
| } |
| |
| static struct device_operations device_ops = { |
| .read_resources = uart_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = uart_common_enable_resources, |
| .ops_pci = &pci_dev_ops_pci, |
| }; |
| |
| static const unsigned short pci_device_ids[] = { |
| PCI_DEVICE_ID_INTEL_SPT_UART0, |
| PCI_DEVICE_ID_INTEL_SPT_UART1, |
| PCI_DEVICE_ID_INTEL_SPT_UART2, |
| PCI_DEVICE_ID_INTEL_SPT_H_UART0, |
| PCI_DEVICE_ID_INTEL_SPT_H_UART1, |
| PCI_DEVICE_ID_INTEL_SPT_H_UART2, |
| PCI_DEVICE_ID_INTEL_KBP_H_UART0, |
| PCI_DEVICE_ID_INTEL_KBP_H_UART1, |
| PCI_DEVICE_ID_INTEL_KBP_H_UART2, |
| PCI_DEVICE_ID_INTEL_APL_UART0, |
| PCI_DEVICE_ID_INTEL_APL_UART1, |
| PCI_DEVICE_ID_INTEL_APL_UART2, |
| PCI_DEVICE_ID_INTEL_APL_UART3, |
| PCI_DEVICE_ID_INTEL_CNL_UART0, |
| PCI_DEVICE_ID_INTEL_CNL_UART1, |
| PCI_DEVICE_ID_INTEL_CNL_UART2, |
| PCI_DEVICE_ID_INTEL_GLK_UART0, |
| PCI_DEVICE_ID_INTEL_GLK_UART1, |
| PCI_DEVICE_ID_INTEL_GLK_UART2, |
| PCI_DEVICE_ID_INTEL_GLK_UART3, |
| PCI_DEVICE_ID_INTEL_CNP_H_UART0, |
| PCI_DEVICE_ID_INTEL_CNP_H_UART1, |
| PCI_DEVICE_ID_INTEL_CNP_H_UART2, |
| PCI_DEVICE_ID_INTEL_ICP_UART0, |
| PCI_DEVICE_ID_INTEL_ICP_UART1, |
| PCI_DEVICE_ID_INTEL_ICP_UART2, |
| PCI_DEVICE_ID_INTEL_CMP_UART0, |
| PCI_DEVICE_ID_INTEL_CMP_UART1, |
| PCI_DEVICE_ID_INTEL_CMP_UART2, |
| PCI_DEVICE_ID_INTEL_CMP_H_UART0, |
| PCI_DEVICE_ID_INTEL_CMP_H_UART1, |
| PCI_DEVICE_ID_INTEL_CMP_H_UART2, |
| PCI_DEVICE_ID_INTEL_TGP_UART0, |
| PCI_DEVICE_ID_INTEL_TGP_UART1, |
| PCI_DEVICE_ID_INTEL_TGP_UART2, |
| PCI_DEVICE_ID_INTEL_MCC_UART0, |
| PCI_DEVICE_ID_INTEL_MCC_UART1, |
| PCI_DEVICE_ID_INTEL_MCC_UART2, |
| PCI_DEVICE_ID_INTEL_JSP_UART0, |
| PCI_DEVICE_ID_INTEL_JSP_UART1, |
| PCI_DEVICE_ID_INTEL_JSP_UART2, |
| 0, |
| }; |
| |
| static const struct pci_driver pch_uart __pci_driver = { |
| .ops = &device_ops, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .devices = pci_device_ids, |
| }; |
| #endif /* ENV_RAMSTAGE */ |