superio/nuvoton/npcd378: Switch to superio/common
Replace DSDT ACPI code and DSDT injection with a SSDT only solution.
The current implementation shows some issues on current Linux, which
might be due to external ACPI objects, which are then injected into
DSDT or the fact that those objects only use 3 characters.
Replace all the DSDT code with an SSDT generator.
Tested on HP Z220:
Boots into Linux with no ACPI errors. The SSDT can be disassembled.
Change-Id: I41616d9bf320fd2b4d8495892b8190cd2a2d057f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
diff --git a/src/mainboard/hp/z220_sff_workstation/devicetree.cb b/src/mainboard/hp/z220_sff_workstation/devicetree.cb
index ab6ee04..6823c9f 100644
--- a/src/mainboard/hp/z220_sff_workstation/devicetree.cb
+++ b/src/mainboard/hp/z220_sff_workstation/devicetree.cb
@@ -76,100 +76,104 @@
device pci 1d.0 on end # USB2 EHCI #1
device pci 1e.0 on end # PCI bridge
device pci 1f.0 on # LPC bridge PCI-LPC bridge
- chip superio/nuvoton/npcd378
- device pnp 2e.0 off end # Floppy
- device pnp 2e.1 on # Parallel port
- # global
+ chip superio/common
+ device pnp 2e.ff on # passes SIO base addr to SSDT gen
+ chip superio/nuvoton/npcd378
+ device pnp 2e.0 off end # Floppy
+ device pnp 2e.1 on # Parallel port
+ # global
- # serialice: Vendor writes:
- irq 0x14 = 0x9c
- irq 0x1c = 0xa8
- irq 0x1d = 0x08
- irq 0x22 = 0x3f
- irq 0x1a = 0xb0
- # dumped from superiotool:
- irq 0x1b = 0x1e
- irq 0x27 = 0x08
- irq 0x2a = 0x20
- irq 0x2d = 0x01
- # parallel port
- io 0x60 = 0x378
- irq 0x70 = 0x07
- drq 0x74 = 0x01
- end
- device pnp 2e.2 off # COM1
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # COM2, IR
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 on # LED control
- io 0x60 = 0x600
- # IOBASE[0h] = bit0 LED red / green
- # IOBASE[0h] = bit1-4 LED PWM duty cycle
- # IOBASE[1h] = bit6 SWCC
+ # serialice: Vendor writes:
+ irq 0x14 = 0x9c
+ irq 0x1c = 0xa8
+ irq 0x1d = 0x08
+ irq 0x22 = 0x3f
+ irq 0x1a = 0xb0
+ # dumped from superiotool:
+ irq 0x1b = 0x1e
+ irq 0x27 = 0x08
+ irq 0x2a = 0x20
+ irq 0x2d = 0x01
+ # parallel port
+ io 0x60 = 0x378
+ irq 0x70 = 0x07
+ drq 0x74 = 0x01
+ end
+ device pnp 2e.2 off # COM1
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 on # COM2, IR
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.4 on # LED control
+ io 0x60 = 0x600
+ # IOBASE[0h] = bit0 LED red / green
+ # IOBASE[0h] = bit1-4 LED PWM duty cycle
+ # IOBASE[1h] = bit6 SWCC
- io 0x62 = 0x610
- # IOBASE [0h] = GPES
- # IOBASE [1h] = GPEE
- # IOBASE [4h:7h] = 32bit upcounter at 1Mhz
- # IOBASE [8h:bh] = GPS
- # IOBASE [ch:fh] = GPE
- end
- device pnp 2e.5 on # Mouse
- irq 0x70 = 0xc
- end
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x0060
- io 0x62 = 0x0064
- irq 0x70 = 0x01
- # serialice: Vendor writes:
- drq 0xf0 = 0x40
- end
- device pnp 2e.7 on # WDT ?
- io 0x60 = 0x620
- end
- device pnp 2e.8 on # HWM
- io 0x60 = 0x800
- # IOBASE[0h:feh] HWM page
- # IOBASE[ffh] bit0-bit3 page selector
+ io 0x62 = 0x610
+ # IOBASE [0h] = GPES
+ # IOBASE [1h] = GPEE
+ # IOBASE [4h:7h] = 32bit upcounter at 1Mhz
+ # IOBASE [8h:bh] = GPS
+ # IOBASE [ch:fh] = GPE
+ end
+ device pnp 2e.5 on # Mouse
+ irq 0x70 = 0xc
+ end
+ device pnp 2e.6 on # Keyboard
+ io 0x60 = 0x0060
+ io 0x62 = 0x0064
+ irq 0x70 = 0x01
+ # serialice: Vendor writes:
+ drq 0xf0 = 0x40
+ end
+ device pnp 2e.7 on # WDT ?
+ io 0x60 = 0x620
+ end
+ device pnp 2e.8 on # HWM
+ io 0x60 = 0x800
+ # IOBASE[0h:feh] HWM page
+ # IOBASE[ffh] bit0-bit3 page selector
- drq 0xf0 = 0x20
- drq 0xf1 = 0x01
- drq 0xf2 = 0x40
- drq 0xf3 = 0x01
+ drq 0xf0 = 0x20
+ drq 0xf1 = 0x01
+ drq 0xf2 = 0x40
+ drq 0xf3 = 0x01
- drq 0xf4 = 0x66
- drq 0xf5 = 0x67
- drq 0xf6 = 0x66
- drq 0xf7 = 0x01
- end
- device pnp 2e.f on # GPIO OD ?
- drq 0xf1 = 0x97
- drq 0xf2 = 0x01
- drq 0xf5 = 0x08
- drq 0xfe = 0x80
- end
- device pnp 2e.15 on # BUS ?
- io 0x60 = 0x0680
- io 0x62 = 0x0690
- end
- device pnp 2e.1c on # Suspend Control ?
- io 0x60 = 0x640
- # writing to IOBASE[5h]
- # 0x0: Power off
- # 0x9: Power off and bricked until CMOS battery removed
- end
- device pnp 2e.1e on # GPIO ?
- io 0x60 = 0x660
- drq 0xf4 = 0x01
- # skip the following, as it
- # looks like remapped registers
- #drq 0xf5 = 0x06
- #drq 0xf6 = 0x60
- #drq 0xfe = 0x03
+ drq 0xf4 = 0x66
+ drq 0xf5 = 0x67
+ drq 0xf6 = 0x66
+ drq 0xf7 = 0x01
+ end
+ device pnp 2e.f on # GPIO OD ?
+ drq 0xf1 = 0x97
+ drq 0xf2 = 0x01
+ drq 0xf5 = 0x08
+ drq 0xfe = 0x80
+ end
+ device pnp 2e.15 on # BUS ?
+ io 0x60 = 0x0680
+ io 0x62 = 0x0690
+ end
+ device pnp 2e.1c on # Suspend Control ?
+ io 0x60 = 0x640
+ # writing to IOBASE[5h]
+ # 0x0: Power off
+ # 0x9: Power off and bricked until CMOS battery removed
+ end
+ device pnp 2e.1e on # GPIO ?
+ io 0x60 = 0x660
+ drq 0xf4 = 0x01
+ # skip the following, as it
+ # looks like remapped registers
+ #drq 0xf5 = 0x06
+ #drq 0xf6 = 0x60
+ #drq 0xfe = 0x03
+ end
+ end
end
end
chip drivers/pc80/tpm