| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org> |
| ## |
| ## This program is free software; you can redistribute it and/or |
| ## modify it under the terms of the GNU General Public License as |
| ## published by the Free Software Foundation; version 2 of |
| ## the License. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| |
| chip northbridge/intel/sandybridge |
| register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" |
| register "gfx.link_frequency_270_mhz" = "0" |
| register "gfx.ndid" = "3" |
| register "gfx.use_spread_spectrum_clock" = "0" |
| register "gpu_dp_b_hotplug" = "0" |
| register "gpu_dp_c_hotplug" = "0" |
| register "gpu_dp_d_hotplug" = "0" |
| |
| device cpu_cluster 0x0 on |
| chip cpu/intel/model_206ax |
| register "c1_acpower" = "1" |
| register "c1_battery" = "1" |
| register "c2_acpower" = "3" |
| register "c2_battery" = "3" |
| register "c3_acpower" = "5" |
| register "c3_battery" = "5" |
| device lapic 0x0 on end |
| device lapic 0xacac off end |
| end |
| end |
| |
| register "pci_mmio_size" = "2048" |
| |
| device domain 0x0 on |
| subsystemid 0x103c 0x1791 inherit |
| |
| device pci 00.0 on end # Host bridge Host bridge |
| device pci 01.0 on end # PCIe Bridge for discrete graphics |
| device pci 02.0 on end # Internal graphics VGA controller |
| |
| chip southbridge/intel/bd82x6x # Intel Series 7 PCH |
| register "c2_latency" = "0x0065" |
| register "docking_supported" = "0" |
| register "gen1_dec" = "0x00fc0601" |
| register "gen2_dec" = "0x00fc0801" |
| register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" |
| register "pcie_port_coalesce" = "1" |
| register "sata_interface_speed_support" = "0x3" |
| register "sata_port_map" = "0xf" |
| register "spi_lvscc" = "0x2005" |
| register "spi_uvscc" = "0x2005" |
| |
| device pci 14.0 on end # xHCI |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 on end # Management Engine KT |
| device pci 19.0 on end # Intel Gigabit Ethernet |
| device pci 1a.0 on end # USB2 EHCI #2 |
| device pci 1b.0 on end # High Definition Audio Audio controller |
| device pci 1c.0 on end # PCIe Port #1 |
| device pci 1c.1 off end # PCIe Port #2 |
| device pci 1c.2 off end # PCIe Port #3 |
| device pci 1c.3 off end # PCIe Port #4 |
| device pci 1c.4 on end # PCIe Port #5 |
| device pci 1c.5 off end # PCIe Port #6 |
| device pci 1c.6 on end # PCIe Port #7 |
| device pci 1c.7 on end # PCIe Port #8 |
| device pci 1d.0 on end # USB2 EHCI #1 |
| device pci 1e.0 on end # PCI bridge |
| device pci 1f.0 on # LPC bridge PCI-LPC bridge |
| chip superio/nuvoton/npcd378 |
| device pnp 2e.0 off end # Floppy |
| device pnp 2e.1 on # Parallel port |
| # global |
| |
| # serialice: Vendor writes: |
| irq 0x14 = 0x9c |
| irq 0x1c = 0xa8 |
| irq 0x1d = 0x08 |
| irq 0x22 = 0x3f |
| irq 0x1a = 0xb0 |
| # dumped from superiotool: |
| irq 0x1b = 0x1e |
| irq 0x27 = 0x08 |
| irq 0x2a = 0x20 |
| irq 0x2d = 0x01 |
| # parallel port |
| io 0x60 = 0x378 |
| irq 0x70 = 0x07 |
| drq 0x74 = 0x01 |
| end |
| device pnp 2e.2 off # COM1 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 2e.3 on # COM2, IR |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.4 on # LED control |
| io 0x60 = 0x600 |
| # IOBASE[0h] = bit0 LED red / green |
| # IOBASE[0h] = bit1-4 LED PWM duty cycle |
| # IOBASE[1h] = bit6 SWCC |
| |
| io 0x62 = 0x610 |
| # IOBASE [0h] = GPES |
| # IOBASE [1h] = GPEE |
| # IOBASE [4h:7h] = 32bit upcounter at 1Mhz |
| # IOBASE [8h:bh] = GPS |
| # IOBASE [ch:fh] = GPE |
| end |
| device pnp 2e.5 on # Mouse |
| irq 0x70 = 0xc |
| end |
| device pnp 2e.6 on # Keyboard |
| io 0x60 = 0x0060 |
| io 0x62 = 0x0064 |
| irq 0x70 = 0x01 |
| # serialice: Vendor writes: |
| drq 0xf0 = 0x40 |
| end |
| device pnp 2e.7 on # WDT ? |
| io 0x60 = 0x620 |
| end |
| device pnp 2e.8 on # HWM |
| io 0x60 = 0x800 |
| # IOBASE[0h:feh] HWM page |
| # IOBASE[ffh] bit0-bit3 page selector |
| |
| drq 0xf0 = 0x20 |
| drq 0xf1 = 0x01 |
| drq 0xf2 = 0x40 |
| drq 0xf3 = 0x01 |
| |
| drq 0xf4 = 0x66 |
| drq 0xf5 = 0x67 |
| drq 0xf6 = 0x66 |
| drq 0xf7 = 0x01 |
| end |
| device pnp 2e.f on # GPIO OD ? |
| drq 0xf1 = 0x97 |
| drq 0xf2 = 0x01 |
| drq 0xf5 = 0x08 |
| drq 0xfe = 0x80 |
| end |
| device pnp 2e.15 on # BUS ? |
| io 0x60 = 0x0680 |
| io 0x62 = 0x0690 |
| end |
| device pnp 2e.1c on # Suspend Control ? |
| io 0x60 = 0x640 |
| # writing to IOBASE[5h] |
| # 0x0: Power off |
| # 0x9: Power off and bricked until CMOS battery removed |
| end |
| device pnp 2e.1e on # GPIO ? |
| io 0x60 = 0x660 |
| drq 0xf4 = 0x01 |
| # skip the following, as it |
| # looks like remapped registers |
| #drq 0xf5 = 0x06 |
| #drq 0xf6 = 0x60 |
| #drq 0xfe = 0x03 |
| end |
| end |
| chip drivers/pc80/tpm |
| device pnp 4e.0 on end # TPM module |
| end |
| end |
| device pci 1f.2 on end # SATA Controller 1 |
| device pci 1f.3 on end # SMBus |
| device pci 1f.5 off end # SATA Controller 2 |
| device pci 1f.6 off end # Thermal |
| end |
| end |
| end |