| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2010 coresystems GmbH |
| * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <bootblock_common.h> |
| #include <stdint.h> |
| #include <device/pnp_ops.h> |
| #include <device/pci_ops.h> |
| #include <cpu/x86/lapic.h> |
| #include <cpu/x86/msr.h> |
| #include <device/pci_def.h> |
| #include <northbridge/intel/sandybridge/raminit_native.h> |
| #include <northbridge/intel/sandybridge/raminit.h> |
| #include <northbridge/intel/sandybridge/sandybridge.h> |
| #include <southbridge/intel/bd82x6x/pch.h> |
| #include <southbridge/intel/common/gpio.h> |
| #include <superio/winbond/common/winbond.h> |
| |
| void mainboard_pch_lpc_setup(void) |
| { |
| /* Set COM3/COM1 decode ranges: 0x3e8/0x3f8 */ |
| pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0070); |
| |
| /* Enable KBC on 0x06/0x64 (KBC), |
| * EC on 0x62/0x66 (MC), |
| * EC on 0x20c-0x20f (GAMEH), |
| * Super I/O on 0x2e/0x2f (CNF1), |
| * COM1/COM3 decode ranges. */ |
| pci_write_config16(PCH_LPC_DEV, LPC_EN, |
| KBC_LPC_EN | MC_LPC_EN | |
| CNF1_LPC_EN | GAMEH_LPC_EN | |
| COMA_LPC_EN | COMB_LPC_EN); |
| } |
| |
| void bootblock_mainboard_early_init(void) |
| { |
| int lvds_3v = 0; /* 0 (5V) or 1 (3V3) */ |
| int dis_bl_inv = 1; /* backlight inversion: 1 = disabled, 0 = enabled */ |
| pnp_devfn_t dev = PNP_DEV(0x2e, 0x9); |
| pnp_enter_conf_state(dev); |
| pnp_write_config(dev, 0x29, 0x02); /* Pins 119, 120 are GPIO21, 20 */ |
| pnp_write_config(dev, 0x30, 0x03); /* Enable GPIO2+3 */ |
| pnp_write_config(dev, 0x2a, 0x01); /* Pins 62, 63, 65, 66 are |
| GPIO27, 26, 25, 24 */ |
| pnp_write_config(dev, 0x2c, 0xc3); /* Pin 90 is GPIO32, |
| Pins 78~85 are UART B */ |
| pnp_write_config(dev, 0x2d, 0x00); /* Pins 67, 68, 70~73, 75, 77 are |
| GPIO57~50 */ |
| pnp_set_logical_device(dev); |
| /* Values can only be changed, when devices are enabled. */ |
| pnp_write_config(dev, 0xe3, 0xdd); /* GPIO2 bits 1, 5 are output */ |
| pnp_write_config(dev, 0xe4, (dis_bl_inv << 5) | (lvds_3v << 1)); /* GPIO2 bits 1, 5 */ |
| pnp_write_config(dev, 0xf3, 0x40); /* Disable suspend LED during normal operation */ |
| pnp_exit_conf_state(dev); |
| } |
| |
| void mainboard_fill_pei_data(struct pei_data *pei_data) |
| { |
| struct pei_data pei_data_template = { |
| .pei_version = PEI_VERSION, |
| .mchbar = (uintptr_t)DEFAULT_MCHBAR, |
| .dmibar = (uintptr_t)DEFAULT_DMIBAR, |
| .epbar = DEFAULT_EPBAR, |
| .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, |
| .smbusbar = SMBUS_IO_BASE, |
| .wdbbar = 0x4000000, |
| .wdbsize = 0x1000, |
| .hpet_address = CONFIG_HPET_ADDRESS, |
| .rcba = (uintptr_t)DEFAULT_RCBABASE, |
| .pmbase = DEFAULT_PMBASE, |
| .gpiobase = DEFAULT_GPIOBASE, |
| .thermalbase = 0xfed08000, |
| .system_type = 0, /* 0 Mobile, 1 Desktop/Server */ |
| .tseg_size = CONFIG_SMM_TSEG_SIZE, |
| .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, |
| .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, |
| .ec_present = 1, |
| .gbe_enable = 1, |
| .ddr3lv_support = 0, |
| /* |
| * 0 = leave channel enabled |
| * 1 = disable dimm 0 on channel |
| * 2 = disable dimm 1 on channel |
| * 3 = disable dimm 0+1 on channel |
| */ |
| .dimm_channel0_disabled = 2, |
| .dimm_channel1_disabled = 2, |
| .max_ddr3_freq = 1600, |
| .usb_port_config = { |
| /* enabled usb oc pin length */ |
| { 1, 0, 0x0040 }, /* P0: lower left USB 3.0 (OC0) */ |
| { 1, 0, 0x0040 }, /* P1: upper left USB 3.0 (OC0) */ |
| { 1, 0, 0x0040 }, /* P2: lower right USB 3.0 (OC0) */ |
| { 1, 0, 0x0040 }, /* P3: upper right USB 3.0 (OC0) */ |
| { 1, 0, 0x0040 }, /* P4: lower USB 2.0 (OC0) */ |
| { 1, 0, 0x0040 }, /* P5: upper USB 2.0 (OC0) */ |
| { 1, 0, 0x0040 }, /* P6: front panel USB 2.0 (OC0) */ |
| { 1, 0, 0x0040 }, /* P7: front panel USB 2.0 (OC0) */ |
| { 1, 4, 0x0040 }, /* P8: internal USB 2.0 (OC4) */ |
| { 1, 4, 0x0040 }, /* P9: internal USB 2.0 (OC4) */ |
| { 1, 4, 0x0040 }, /* P10: internal USB 2.0 (OC4) */ |
| { 1, 4, 0x0040 }, /* P11: internal USB 2.0 (OC4) */ |
| { 1, 4, 0x0040 }, /* P12: internal USB 2.0 (OC4) */ |
| { 1, 4, 0x0040 }, /* P13: internal USB 2.0 (OC4) */ |
| }, |
| .usb3 = { |
| .mode = 3, /* Smart Auto? */ |
| .hs_port_switch_mask = 0xf, /* All four ports. */ |
| .preboot_support = 1, /* preOS driver? */ |
| .xhci_streams = 1, /* Enable. */ |
| }, |
| .pcie_init = 1, |
| }; |
| *pei_data = pei_data_template; |
| } |
| |
| const struct southbridge_usb_port mainboard_usb_ports[] = { |
| /* enabled power usb oc pin */ |
| { 1, 0, 0 }, /* P0: lower left USB 3.0 (OC0) */ |
| { 1, 0, 0 }, /* P1: upper left USB 3.0 (OC0) */ |
| { 1, 0, 0 }, /* P2: lower right USB 3.0 (OC0) */ |
| { 1, 0, 0 }, /* P3: upper right USB 3.0 (OC0) */ |
| { 1, 0, 0 }, /* P4: lower USB 2.0 (OC0) */ |
| { 1, 0, 0 }, /* P5: upper USB 2.0 (OC0) */ |
| { 1, 0, 0 }, /* P6: front panel USB 2.0 (OC0) */ |
| { 1, 0, 0 }, /* P7: front panel USB 2.0 (OC0) */ |
| { 1, 0, 4 }, /* P8: internal USB 2.0 (OC4) */ |
| { 1, 0, 4 }, /* P9: internal USB 2.0 (OC4) */ |
| { 1, 0, 4 }, /* P10: internal USB 2.0 (OC4) */ |
| { 1, 0, 4 }, /* P11: internal USB 2.0 (OC4) */ |
| { 1, 0, 4 }, /* P12: internal USB 2.0 (OC4) */ |
| { 1, 0, 4 }, /* P13: internal USB 2.0 (OC4) */ |
| }; |
| |
| void mainboard_get_spd(spd_raw_data *spd, bool id_only) |
| { |
| read_spd(&spd[0], 0x50, id_only); |
| read_spd(&spd[2], 0x52, id_only); |
| } |
| |
| void mainboard_early_init(int s3resume) |
| { |
| /* Enable PEG10 (1x16) */ |
| pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, |
| pci_read_config32(PCI_DEV(0, 0, 0), DEVEN) | |
| DEVEN_PEG10); |
| } |
| |
| int mainboard_should_reset_usb(int s3resume) |
| { |
| return !s3resume; |
| } |