| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <arch/io.h> |
| #include <device/pci_ops.h> |
| #include <cf9_reset.h> |
| #include <console/console.h> |
| #include <delay.h> |
| #include <device/pci_def.h> |
| #include <halt.h> |
| #include <southbridge/intel/common/me.h> |
| #include <timestamp.h> |
| #include "me.h" |
| #include "pch.h" |
| |
| static const char *me_ack_values[] = { |
| [ME_HFS_ACK_NO_DID] = "No DID Ack received", |
| [ME_HFS_ACK_RESET] = "Non-power cycle reset", |
| [ME_HFS_ACK_PWR_CYCLE] = "Power cycle reset", |
| [ME_HFS_ACK_S3] = "Go to S3", |
| [ME_HFS_ACK_S4] = "Go to S4", |
| [ME_HFS_ACK_S5] = "Go to S5", |
| [ME_HFS_ACK_GBL_RESET] = "Global Reset", |
| [ME_HFS_ACK_CONTINUE] = "Continue to boot" |
| }; |
| |
| void intel_early_me_status(void) |
| { |
| union me_hfs hfs; |
| union me_gmes gmes; |
| u32 id = pci_read_config32(PCH_ME_DEV, PCI_VENDOR_ID); |
| |
| if ((id == 0xffffffff) || (id == 0x00000000) || |
| (id == 0x0000ffff) || (id == 0xffff0000)) { |
| printk(BIOS_DEBUG, "Missing Intel ME PCI device.\n"); |
| } else { |
| hfs.raw = pci_read_config32(PCH_ME_DEV, PCI_ME_HFS); |
| gmes.raw = pci_read_config32(PCH_ME_DEV, PCI_ME_GMES); |
| |
| intel_me_status(&hfs, &gmes); |
| } |
| } |
| |
| int intel_early_me_init(void) |
| { |
| int count; |
| union me_uma uma; |
| union me_hfs hfs; |
| |
| printk(BIOS_INFO, "Intel ME early init\n"); |
| |
| /* Wait for ME UMA SIZE VALID bit to be set */ |
| for (count = ME_RETRY; count > 0; --count) { |
| uma.raw = pci_read_config32(PCH_ME_DEV, PCI_ME_UMA); |
| if (uma.valid) |
| break; |
| udelay(ME_DELAY); |
| } |
| if (!count) { |
| printk(BIOS_ERR, "ME is not ready!\n"); |
| return -1; |
| } |
| |
| /* Check for valid firmware */ |
| hfs.raw = pci_read_config32(PCH_ME_DEV, PCI_ME_HFS); |
| if (hfs.fpt_bad) { |
| printk(BIOS_WARNING, "ME has bad firmware\n"); |
| return -1; |
| } |
| |
| printk(BIOS_INFO, "Intel ME firmware is ready\n"); |
| return 0; |
| } |
| |
| int intel_early_me_uma_size(void) |
| { |
| union me_uma uma; |
| |
| uma.raw = pci_read_config32(PCH_ME_DEV, PCI_ME_UMA); |
| if (uma.valid) { |
| printk(BIOS_DEBUG, "ME: Requested %uMB UMA\n", uma.size); |
| return uma.size; |
| } |
| |
| printk(BIOS_DEBUG, "ME: Invalid UMA size\n"); |
| return 0; |
| } |
| |
| int intel_early_me_init_done(u8 status) |
| { |
| u8 reset, errorcode, opmode; |
| u32 mebase_l, mebase_h; |
| u32 millisec; |
| u32 hfs, me_fws2; |
| union me_did did = { |
| .init_done = ME_INIT_DONE, |
| .status = status |
| }; |
| u32 meDID; |
| |
| hfs = (pci_read_config32(PCH_ME_DEV, PCI_ME_HFS) & 0xff000) >> 12; |
| |
| opmode = (hfs & 0xf0) >> 4; |
| errorcode = hfs & 0xf; |
| |
| if (opmode != ME_HFS_MODE_NORMAL) { |
| printk(BIOS_NOTICE, "ME: Wrong mode : %d\n", opmode); |
| //return 0; |
| } |
| if (errorcode) { |
| printk(BIOS_NOTICE, "ME: HFS error : %d\n", errorcode); |
| //return 0; |
| } |
| |
| me_fws2 = pci_read_config32(PCH_ME_DEV, PCI_ME_GMES); |
| printk(BIOS_NOTICE, "ME: FWS2: 0x%x\n", me_fws2); |
| printk(BIOS_NOTICE, "ME: Bist in progress: 0x%x\n", me_fws2 & 0x1); |
| printk(BIOS_NOTICE, "ME: ICC Status : 0x%x\n", (me_fws2 & 0x6) >> 1); |
| printk(BIOS_NOTICE, "ME: Invoke MEBx : 0x%x\n", (me_fws2 & 0x8) >> 3); |
| printk(BIOS_NOTICE, "ME: CPU replaced : 0x%x\n", (me_fws2 & 0x10) >> 4); |
| printk(BIOS_NOTICE, "ME: MBP ready : 0x%x\n", (me_fws2 & 0x20) >> 5); |
| printk(BIOS_NOTICE, "ME: MFS failure : 0x%x\n", (me_fws2 & 0x40) >> 6); |
| printk(BIOS_NOTICE, "ME: Warm reset req : 0x%x\n", (me_fws2 & 0x80) >> 7); |
| printk(BIOS_NOTICE, "ME: CPU repl valid : 0x%x\n", (me_fws2 & 0x100) >> 8); |
| printk(BIOS_NOTICE, "ME: (Reserved) : 0x%x\n", (me_fws2 & 0x600) >> 9); |
| printk(BIOS_NOTICE, "ME: FW update req : 0x%x\n", (me_fws2 & 0x800) >> 11); |
| printk(BIOS_NOTICE, "ME: (Reserved) : 0x%x\n", (me_fws2 & 0xf000) >> 12); |
| printk(BIOS_NOTICE, "ME: Current state : 0x%x\n", (me_fws2 & 0xff0000) >> 16); |
| printk(BIOS_NOTICE, "ME: Current PM event: 0x%x\n", (me_fws2 & 0xf000000) >> 24); |
| printk(BIOS_NOTICE, "ME: Progress code : 0x%x\n", (me_fws2 & 0xf0000000) >> 28); |
| |
| /* Poll CPU replaced for 50ms */ |
| millisec = 0; |
| while ((((me_fws2 & 0x100) >> 8) == 0) && millisec < 50) { |
| udelay(1000); |
| me_fws2 = pci_read_config32(PCH_ME_DEV, PCI_ME_GMES); |
| millisec++; |
| } |
| if (millisec >= 50 || ((me_fws2 & 0x100) >> 8) == 0x0) { |
| printk(BIOS_NOTICE, "Waited long enough, or CPU was not replaced, continue...\n"); |
| } else if ((me_fws2 & 0x100) == 0x100) { |
| if ((me_fws2 & 0x80) == 0x80) { |
| printk(BIOS_NOTICE, "CPU was replaced & warm reset required...\n"); |
| pci_and_config16(PCH_LPC_DEV, GEN_PMCON_2, ~0x80); |
| set_global_reset(0); |
| system_reset(); |
| } |
| |
| if (((me_fws2 & 0x10) == 0x10) && (me_fws2 & 0x80) == 0x00) { |
| printk(BIOS_NOTICE, "Full training required\n"); |
| } |
| } |
| |
| printk(BIOS_NOTICE, "PASSED! Tell ME that DRAM is ready\n"); |
| |
| /* MEBASE from MESEG_BASE[35:20] */ |
| mebase_l = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_L); |
| mebase_h = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_H) & 0xf; |
| did.uma_base = (mebase_l >> 20) | (mebase_h << 12); |
| |
| meDID = did.uma_base | (1 << 28);// | (1 << 23); |
| pci_write_config32(PCH_ME_DEV, PCI_ME_H_GS, meDID); |
| |
| /* Must wait for ME acknowledgement */ |
| if (opmode == ME_HFS_MODE_DEBUG) { |
| printk(BIOS_NOTICE, |
| "ME: ME is reporting as disabled, " |
| "so not waiting for a response.\n"); |
| } else { |
| timestamp_add_now(TS_ME_INFORM_DRAM_START); |
| udelay(100); |
| millisec = 0; |
| do { |
| udelay(1000); |
| hfs = (pci_read_config32( |
| PCH_ME_DEV, PCI_ME_HFS) & 0xfe000000) |
| >> 24; |
| millisec++; |
| } while ((((hfs & 0xf0) >> 4) != ME_HFS_BIOS_DRAM_ACK) |
| && (millisec <= 5000)); |
| timestamp_add_now(TS_ME_INFORM_DRAM_END); |
| } |
| |
| me_fws2 = pci_read_config32(PCH_ME_DEV, PCI_ME_GMES); |
| printk(BIOS_NOTICE, "ME: FWS2: 0x%x\n", me_fws2); |
| printk(BIOS_NOTICE, "ME: Bist in progress: 0x%x\n", me_fws2 & 0x1); |
| printk(BIOS_NOTICE, "ME: ICC Status : 0x%x\n", (me_fws2 & 0x6) >> 1); |
| printk(BIOS_NOTICE, "ME: Invoke MEBx : 0x%x\n", (me_fws2 & 0x8) >> 3); |
| printk(BIOS_NOTICE, "ME: CPU replaced : 0x%x\n", (me_fws2 & 0x10) >> 4); |
| printk(BIOS_NOTICE, "ME: MBP ready : 0x%x\n", (me_fws2 & 0x20) >> 5); |
| printk(BIOS_NOTICE, "ME: MFS failure : 0x%x\n", (me_fws2 & 0x40) >> 6); |
| printk(BIOS_NOTICE, "ME: Warm reset req : 0x%x\n", (me_fws2 & 0x80) >> 7); |
| printk(BIOS_NOTICE, "ME: CPU repl valid : 0x%x\n", (me_fws2 & 0x100) >> 8); |
| printk(BIOS_NOTICE, "ME: (Reserved) : 0x%x\n", (me_fws2 & 0x600) >> 9); |
| printk(BIOS_NOTICE, "ME: FW update req : 0x%x\n", (me_fws2 & 0x800) >> 11); |
| printk(BIOS_NOTICE, "ME: (Reserved) : 0x%x\n", (me_fws2 & 0xf000) >> 12); |
| printk(BIOS_NOTICE, "ME: Current state : 0x%x\n", (me_fws2 & 0xff0000) >> 16); |
| printk(BIOS_NOTICE, "ME: Current PM event: 0x%x\n", (me_fws2 & 0xf000000) >> 24); |
| printk(BIOS_NOTICE, "ME: Progress code : 0x%x\n", (me_fws2 & 0xf0000000) >> 28); |
| |
| /* Return the requested BIOS action */ |
| printk(BIOS_NOTICE, "ME: Requested BIOS Action: %s\n", |
| me_ack_values[(hfs & 0xe) >> 1]); |
| |
| reset = inb(0xcf9); |
| reset &= 0xf1; |
| switch ((hfs & 0xe) >> 1) { |
| case ME_HFS_ACK_NO_DID: |
| case ME_HFS_ACK_CONTINUE: |
| /* Continue to boot */ |
| return 0; |
| case ME_HFS_ACK_RESET: |
| /* Non-power cycle reset */ |
| set_global_reset(0); |
| reset |= 0x06; |
| break; |
| case ME_HFS_ACK_PWR_CYCLE: |
| /* Power cycle reset */ |
| set_global_reset(0); |
| reset |= 0x0e; |
| break; |
| case ME_HFS_ACK_GBL_RESET: |
| /* Global reset */ |
| set_global_reset(1); |
| reset |= 0x0e; |
| break; |
| case ME_HFS_ACK_S3: |
| case ME_HFS_ACK_S4: |
| case ME_HFS_ACK_S5: |
| break; |
| } |
| |
| /* Perform the requested reset */ |
| if (reset) { |
| outb(reset, 0xcf9); |
| halt(); |
| } |
| return -1; |
| } |