| chip northbridge/intel/sandybridge |
| # IGD Displays |
| register "gfx" = "GMA_STATIC_DISPLAYS(0)" |
| |
| # Enable DisplayPort Hotplug with 6ms pulse |
| register "gpu_dp_d_hotplug" = "0x06" |
| |
| # Enable Panel as LVDS and configure power delays |
| register "gpu_panel_port_select" = "PANEL_PORT_LVDS" |
| register "gpu_panel_power_cycle_delay" = "5" # T4: 400ms |
| register "gpu_panel_power_up_delay" = "400" # T1+T2: 40ms |
| register "gpu_panel_power_down_delay" = "150" # T3: 15ms |
| register "gpu_panel_power_backlight_on_delay" = "2100" # T5: 210ms |
| register "gpu_panel_power_backlight_off_delay" = "2100" # TD: 210ms |
| |
| # For native gfx |
| register "gpu_cpu_backlight" = "0x1155" |
| register "gpu_pch_backlight" = "0x06100610" |
| |
| register "max_mem_clock_mhz" = "666" |
| |
| device cpu_cluster 0 on |
| chip cpu/intel/model_206ax |
| # Magic APIC ID to locate this chip |
| device lapic 0x0 on end |
| device lapic 0xacac off end |
| |
| register "tcc_offset" = "5" # TCC of 95C |
| |
| register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) |
| register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) |
| register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) |
| |
| register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) |
| register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) |
| register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) |
| end |
| end |
| |
| register "pci_mmio_size" = "1024" |
| |
| device domain 0 on |
| subsystemid 0x1ae0 0xc000 inherit |
| device pci 00.0 on end # host bridge |
| device pci 02.0 on end # vga controller |
| |
| chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH |
| # GPI routing |
| # 0 No effect (default) |
| # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) |
| # 2 SCI (if corresponding GPIO_EN bit is also set) |
| register "alt_gp_smi_en" = "0x0002" |
| register "gpi1_routing" = "1" |
| register "gpi6_routing" = "2" |
| |
| register "sata_port_map" = "0x3" |
| # Set max SATA speed to 3.0 Gb/s |
| register "sata_interface_speed_support" = "0x2" |
| |
| # Enable EC Port 0x68/0x6C |
| register "gen1_dec" = "0x00040069" |
| |
| # EC range is 0x800-0x9ff |
| register "gen2_dec" = "0x00fc0901" |
| |
| # EC range is 0x1610-0x161F |
| register "gen3_dec" = "0x0001C1611" |
| |
| # Enable zero-based linear PCIe root port functions |
| register "pcie_port_coalesce" = "1" |
| |
| register "c2_latency" = "1" |
| |
| device pci 14.0 on end # USB 3.0 Controller |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT |
| device pci 19.0 off end # Intel Gigabit Ethernet |
| device pci 1a.0 on end # USB2 EHCI #2 (AUO4, BlueTooth) |
| device pci 1b.0 on end # High Definition Audio |
| device pci 1c.0 on end # PCIe Port #1 |
| device pci 1c.1 on end # PCIe Port #2 (WLAN) |
| device pci 1c.2 on end # PCIe Port #3 (Card Reader) |
| register "pcie_aspm_f2" = "0x3" |
| device pci 1c.3 off end # PCIe Port #4 |
| device pci 1c.4 off end # PCIe Port #5 |
| device pci 1c.5 on end # PCIe Port #6 (LAN) |
| device pci 1c.6 off end # PCIe Port #7 |
| device pci 1c.7 off end # PCIe Port #8 |
| device pci 1d.0 on end # USB2 EHCI #1 (Camera, WLAN, WWAN) |
| device pci 1e.0 off end # PCI bridge |
| device pci 1f.0 on |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| chip ec/quanta/it8518 |
| # 60h/64h KBC |
| device pnp ff.1 on # dummy address |
| end |
| end |
| end # LPC bridge |
| device pci 1f.2 on end # SATA Controller 1 (HDD/SSD) |
| device pci 1f.3 on end # SMBus Controller |
| device pci 1f.5 off end # SATA Controller 2 (MSATA) |
| device pci 1f.6 off end # Thermal |
| end |
| end |
| end |