| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * AMD CPU Register Table Related Functions |
| * |
| * Contains code to initialize the CPU MSRs and PCI registers with BKDG recommended values |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: CPU |
| * @e \$Revision: 38402 $ @e \$Date: 2010-09-24 02:11:44 +0800 (Fri, 24 Sep 2010) $ |
| * |
| */ |
| /* |
| ***************************************************************************** |
| * |
| * Copyright (c) 2011, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * *************************************************************************** |
| * |
| */ |
| |
| #ifndef _CPU_TABLE_H_ |
| #define _CPU_TABLE_H_ |
| |
| #define MAX_ENTRY_TYPE_ITEMS32 6 // The maximum number of initializer items for UINT32 entry data types. |
| |
| /** |
| * @page regtableimpl Register Table Implementation Guide |
| * |
| * This register table implementation is modular and extensible, so that support code as |
| * well as table data can be family specific or built out if not needed, and new types |
| * of table entries can be added with low overhead. Because many aspects are now generic, |
| * there can be common implementations for CPU revision and platform feature matching and for |
| * finding and iterating tables. |
| * |
| * @par Adding a new table entry type. |
| * |
| * To add a new table entry type follow these steps. |
| * <ul> |
| * <li> Add a member to the enum TABLE_ENTRY_TYPE which is a descriptive name of the entry's purpose |
| * or distinct characteristics. |
| * |
| * <li> Create an entry data struct with the customized data needed. For example, custom register designations, |
| * data and mask sizes, or feature comparisons. Name your struct by adding "_" and upper-casing the enum name |
| * and adding "_TYPE_ENTRY_DATA" at the end. |
| * |
| * <li> Add the entry data type as a member of the TABLE_ENTRY_DATA union. Be aware of the size of your |
| * entry data struct; all table entries in all tables will share any size increase you introduce! |
| * |
| * <li> If your data entry contains any member types except for UINT32, you can't use the generic first union member |
| * for the initializers that make up the actual tables (it's just UINT32's). The generic MSR entry is |
| * an example. Follow the steps below: |
| * |
| * <ul> |
| * <li> Make a union which has your entry data type as the first member. Use TABLE_ENTRY_DATA as the |
| * second member. Name this with your register followed by "_DATA_INITIALIZER". |
| * |
| * <li> Make a copy of TABLE_ENTRY_FIELDS, and rename it your register "_TYPE_ENTRY_INITIALIZER". Rename |
| * the TABLE_ENTRY_DATA member of that struct to have the type you created in the previous step. |
| * This type can be used to declare an array of entries and make a register table in some family specific |
| * file. |
| * </ul> |
| * |
| * <li> Add the descriptor that will link table entries of your data type to an implementation for it. |
| * <ul> |
| * <li> Find the options file which instantiates the CPU_SPECIFIC_SERVICES for each logical model that will |
| * support the new entry type. |
| * |
| * <li> From there find the instantiation of its TABLE_ENTRY_TYPE_DESCRIPTOR. Add a descriptor to the |
| * to the list for your new type. Provide the name of a function which will implement the |
| * entry data. The function name should reflect that it implements the action for the entry type. |
| * The function must be an instance of F_DO_TABLE_ENTRY. |
| * </ul> |
| * |
| * <li> Implement the function for your entry type data. (If parts of it are family specific add methods to |
| * CPU_SPECIFIC_SERVICES for that and implement them for each family or model required.) @n |
| * The definition of the function must conform to F_DO_TABLE_ENTRY. |
| * In the function preamble, include a cross reference to the entry enum: |
| * @code |
| * * |
| * * @TableEntryTypeMethod{::MyRegister} |
| * * |
| * @endcode |
| * |
| * </ul> |
| * |
| * @par Adding a new Register Table |
| * |
| * To add a new register table for a logical CPU model follow the steps below. |
| * |
| * <ul> |
| * <li> Find the options file which instantiates the CPU_SPECIFIC_SERVICES for the logical model that |
| * should include the table. |
| * |
| * <li> From there find the instantiation of its REGISTER_TABLE list. Add the name of the new register table. |
| * </ul> |
| * |
| */ |
| |
| /*------------------------------------------------------------------------------------------*/ |
| /* |
| * Define the supported table entries. |
| */ |
| /*------------------------------------------------------------------------------------------*/ |
| |
| /** |
| * These are the available types of table entries. |
| * |
| * Each type corresponds to: |
| * - a semantics for the type specific data, for example semantics for a Register value, |
| * Data value, and Mask value. |
| * - optionally, including a method for type specific matching criteria |
| * - a method for writing the desired update to the hardware. |
| * |
| * All types share in common a method to match CPU Family and Model and a method to match |
| * platform feature set. |
| * |
| */ |
| typedef enum { |
| MsrRegister, ///< Processor MSR registers. |
| PciRegister, ///< Processor Config Space registers. |
| FamSpecificWorkaround, ///< Processor Family Specific Workarounds which are @b not practical using the other types. |
| HtPhyRegister, ///< Processor HT Phy registers. |
| HtPhyRangeRegister, ///< Processor HT Phy range of contiguous registers (ex. 40h:48h). |
| DeemphasisRegister, ///< Processor Deemphasis register (HT Phy special case). |
| HtPhyFreqRegister, ///< Processor Frequency dependent HT Phy settings. |
| ProfileFixup, ///< Processor Performance Profile fixups to PCI Config Registers. |
| HtHostPciRegister, ///< Processor Ht Host capability registers (PCI Config). |
| HtHostPerfPciRegister, ///< Processor Ht Host capability registers which depend on performance features. |
| HtTokenPciRegister, ///< Processor Ht Link Token count registers. |
| CoreCountsPciRegister, ///< Processor PCI Config Registers which depend on core counts. |
| ProcCountsPciRegister, ///< Processor PCI Config Registers which depend on processor counts. |
| CompUnitCountsPciRegister, ///< Processor PCI Config Registers which depend on compute unit counts. |
| TokenPciRegister, ///< Processor northbridge Token Count register which may be dependent on connectivity. |
| HtFeatPciRegister, ///< Processor HT Link feature dependant PCI Config Registers. |
| HtPhyProfileRegister, ///< Processor HT Phy registers which depend on performance features. |
| HtLinkPciRegister, ///< Processor HT Link registers (one per link) not part of HT Host capability. |
| TableEntryTypeMax ///< Not a valid entry type, use for limit checking. |
| } TABLE_ENTRY_TYPE; |
| |
| /*------------------------------------------------------------------------------------------*/ |
| /* |
| * Useful types and defines: Selectors, Platform Features, and type specific features. |
| */ |
| /*------------------------------------------------------------------------------------------*/ |
| |
| /** |
| * Select tables for the current core. |
| * |
| * This allows more efficient register table processing, by allowing cores to skip |
| * redundantly setting PCI registers, for example. This feature is not intended to |
| * be relied on for function: it is valid to have a single register table with all settings |
| * processed by every core; it's just slower. |
| * |
| */ |
| typedef enum { |
| AllCores, ///< Select only tables which apply to all cores. |
| CorePairPrimary, ///< Select tables which apply to the primary core of a compute unit (SharedC, SharedNc). |
| PrimaryCores, ///< Select tables which apply to primary cores. |
| BscCore, ///< Select tables which apply to the boot core. |
| TableCoreSelectorMax ///< Not a valid selector, use for limit checking. |
| } TABLE_CORE_SELECTOR; |
| |
| // Initializer bit pattern values for platform features. |
| // Keep in synch with the PLATFORM_FEATURES struct! |
| |
| // The 5 control flow modes. |
| #define AMD_PF_NFCM BIT0 |
| #define AMD_PF_UMA BIT1 // UMA_DR |
| #define AMD_PF_UMA_IFCM BIT2 |
| #define AMD_PF_IFCM BIT3 |
| #define AMD_PF_IOMMU BIT4 |
| // Degree of HT connectivity possible. |
| #define AMD_PF_SINGLE_LINK BIT5 |
| #define AMD_PF_MULTI_LINK BIT6 |
| // For some legacy MSRs, define a couple core count bits. Do not continue adding |
| // core counts to the platform feats, if you need more than this design a table entry type. |
| // Here, provide exactly 1, exactly 2, or anything else. |
| #define AMD_PF_SINGLE_CORE BIT7 |
| #define AMD_PF_DUAL_CORE BIT8 |
| #define AMD_PF_MULTI_CORE BIT9 |
| |
| // Not a platform type, but treat all others as AND |
| #define AMD_PF_AND BIT31 |
| |
| #define AMD_PF_ALL (AMD_PF_NFCM | \ |
| AMD_PF_UMA | \ |
| AMD_PF_UMA_IFCM | \ |
| AMD_PF_IFCM | \ |
| AMD_PF_IOMMU | \ |
| AMD_PF_SINGLE_LINK | \ |
| AMD_PF_MULTI_LINK | \ |
| AMD_PF_SINGLE_CORE | \ |
| AMD_PF_DUAL_CORE | \ |
| AMD_PF_MULTI_CORE) |
| // Do not include AMD_PF_AND in AMD_PF_ALL ! |
| |
| /** |
| * The current platform features. |
| * |
| * Keep this in sync with defines above that are used in the initializers! |
| * |
| * The comments with the bit number are useful for the computing the reserved member size, but |
| * do not write code that assumes you know what bit number one of these members is. |
| * |
| * These platform features are standard for all logical families and models. |
| */ |
| typedef struct { |
| UINT32 PlatformNfcm:1; ///< BIT_0 Normal Flow Control Mode. |
| UINT32 PlatformUma:1; ///< BIT_1 UMA (Display Refresh) Flow Control. |
| UINT32 PlatformUmaIfcm:1; ///< BIT_2 UMA using Isochronous Flow Control. |
| UINT32 PlatformIfcm:1; ///< BIT_3 Isochronous Flow Control Mode (not UMA). |
| UINT32 PlatformIommu:1; ///< BIT_4 IOMMU (a special case Isochronous mode). |
| UINT32 PlatformSingleLink:1; ///< BIT_5 The processor is in a package which implements only a single HT Link. |
| UINT32 PlatformMultiLink:1; ///< BIT_6 The processor is in a package which implements more than one HT Link. |
| UINT32 PlatformSingleCore:1; ///< BIT_7 Single Core processor, for legacy entries. |
| UINT32 PlatformDualCore:1; ///< BIT_8 Dual Core processor, for legacy entries. |
| UINT32 PlatformMultiCore:1; ///< BIT_9 More than dual Core processor, for legacy entries. |
| UINT32 :(30 - 9); ///< The possibilities are (not quite) endless. |
| UINT32 AndPlatformFeats:1; ///< BIT_31 |
| } PLATFORM_FEATURES; |
| |
| /** |
| * Platform Features |
| */ |
| typedef union { |
| UINT32 PlatformValue; ///< Describe Platform Features in UINT32. |
| ///< This one goes first, because then initializers use it automatically for the union. |
| PLATFORM_FEATURES PlatformFeatures; ///< Describe Platform Features in structure |
| } PLATFORM_FEATS; |
| |
| // Sublink Types are defined so they can match each attribute against either |
| // sublink zero or one. The table entry must contain the correct matching |
| // values based on the register. This is available in the BKDG, for each register |
| // which sublink it controls. If the register is independent of sublink, OR values |
| // together or use HT_LINKTYPE_ALL to match if either sublink matches (ex. E0 - E5). |
| // Sublink 0 types, bits 0 thru 14 |
| #define HTPHY_LINKTYPE_SL0_HT3 BIT0 |
| #define HTPHY_LINKTYPE_SL0_HT1 BIT1 |
| #define HTPHY_LINKTYPE_SL0_COHERENT BIT2 |
| #define HTPHY_LINKTYPE_SL0_NONCOHERENT BIT3 |
| #define HTPHY_LINKTYPE_SL0_LINK0 BIT4 |
| #define HTPHY_LINKTYPE_SL0_LINK1 BIT5 |
| #define HTPHY_LINKTYPE_SL0_LINK2 BIT6 |
| #define HTPHY_LINKTYPE_SL0_LINK3 BIT7 |
| // bit 15 is reserved |
| |
| // SubLink 1 types, bits 16 thru 30 |
| #define HTPHY_LINKTYPE_SL1_HT3 BIT16 |
| #define HTPHY_LINKTYPE_SL1_HT1 BIT17 |
| #define HTPHY_LINKTYPE_SL1_COHERENT BIT18 |
| #define HTPHY_LINKTYPE_SL1_NONCOHERENT BIT19 |
| #define HTPHY_LINKTYPE_SL1_LINK4 BIT20 |
| #define HTPHY_LINKTYPE_SL1_LINK5 BIT21 |
| #define HTPHY_LINKTYPE_SL1_LINK6 BIT22 |
| #define HTPHY_LINKTYPE_SL1_LINK7 BIT23 |
| // bit 31 is reserved |
| |
| #define HTPHY_LINKTYPE_SL0_ALL (HTPHY_LINKTYPE_SL0_HT3 | \ |
| HTPHY_LINKTYPE_SL0_HT1 | \ |
| HTPHY_LINKTYPE_SL0_COHERENT | \ |
| HTPHY_LINKTYPE_SL0_NONCOHERENT | \ |
| HTPHY_LINKTYPE_SL0_LINK0 | \ |
| HTPHY_LINKTYPE_SL0_LINK1 | \ |
| HTPHY_LINKTYPE_SL0_LINK2 | \ |
| HTPHY_LINKTYPE_SL0_LINK3) |
| #define HTPHY_LINKTYPE_SL1_ALL (HTPHY_LINKTYPE_SL1_HT3 | \ |
| HTPHY_LINKTYPE_SL1_HT1 | \ |
| HTPHY_LINKTYPE_SL1_COHERENT | \ |
| HTPHY_LINKTYPE_SL1_NONCOHERENT | \ |
| HTPHY_LINKTYPE_SL1_LINK4 | \ |
| HTPHY_LINKTYPE_SL1_LINK5 | \ |
| HTPHY_LINKTYPE_SL1_LINK6 | \ |
| HTPHY_LINKTYPE_SL1_LINK7) |
| #define HTPHY_LINKTYPE_ALL (HTPHY_LINKTYPE_SL0_ALL | HTPHY_LINKTYPE_SL1_ALL) |
| |
| #define HTPHY_REGISTER_MAX 0x0000FFFFul |
| /** |
| * HT PHY Link Features |
| */ |
| typedef struct { |
| UINT32 HtPhySL0Ht3:1; ///< Ht Phy Sub-link 0 Ht3 |
| UINT32 HtPhySL0Ht1:1; ///< Ht Phy Sub-link 0 Ht1 |
| UINT32 HtPhySL0Coh:1; ///< Ht Phy Sub-link 0 Coherent |
| UINT32 HtPhySL0NonCoh:1; ///< Ht Phy Sub-link 0 NonCoherent |
| UINT32 HtPhySL0Link0:1; ///< Ht Phy Sub-link 0 specifically for node link 0. |
| UINT32 HtPhySL0Link1:1; ///< Ht Phy Sub-link 0 specifically for node link 1. |
| UINT32 HtPhySL0Link2:1; ///< Ht Phy Sub-link 0 specifically for node link 2. |
| UINT32 HtPhySL0Link3:1; ///< Ht Phy Sub-link 0 specifically for node link 3. |
| UINT32 :(15 - 7); ///< Ht Phy Sub-link 0 Pad |
| UINT32 HtPhySL1Ht3:1; ///< Ht Phy Sub-link 1 Ht3 |
| UINT32 HtPhySL1Ht1:1; ///< Ht Phy Sub-link 1 Ht1 |
| UINT32 HtPhySL1Coh:1; ///< Ht Phy Sub-link 1 Coherent |
| UINT32 HtPhySL1NonCoh:1; ///< Ht Phy Sub-link 1 NonCoherent |
| UINT32 HtPhySL1Link4:1; ///< Ht Phy Sub-link 1 specifically for node link 4. |
| UINT32 HtPhySL1Link5:1; ///< Ht Phy Sub-link 1 specifically for node link 5. |
| UINT32 HtPhySL1Link6:1; ///< Ht Phy Sub-link 1 specifically for node link 6. |
| UINT32 HtPhySL1Link7:1; ///< Ht Phy Sub-link 1 specifically for node link 7. |
| UINT32 :(31 - 23); ///< Ht Phy Sub-link 1 Pad |
| } HT_PHY_LINK_FEATURES; |
| |
| /** |
| * Ht Phy Link Features |
| */ |
| typedef union { |
| UINT32 HtPhyLinkValue; ///< Describe HY Phy Features in UINT32. |
| ///< This one goes first, because then initializers use it automatically for the union. |
| HT_PHY_LINK_FEATURES HtPhyLinkFeatures; ///< Describe HT Phy Features in structure. |
| } HT_PHY_LINK_FEATS; |
| |
| // DB Level for initializing Deemphasis |
| // This must be in sync with DEEMPHASIS_FEATURES and PLATFORM_DEEMPHASIS_LEVEL (agesa.h) |
| #define DEEMPHASIS_LEVEL_NONE BIT0 |
| #define DEEMPHASIS_LEVEL__3 BIT1 |
| #define DEEMPHASIS_LEVEL__6 BIT2 |
| #define DEEMPHASIS_LEVEL__8 BIT3 |
| #define DEEMPHASIS_LEVEL__11 BIT4 |
| #define DEEMPHASIS_LEVEL__11_8 BIT5 |
| #define DCV_LEVEL_NONE BIT16 |
| #define DCV_LEVEL__2 BIT17 |
| #define DCV_LEVEL__3 BIT18 |
| #define DCV_LEVEL__5 BIT19 |
| #define DCV_LEVEL__6 BIT20 |
| #define DCV_LEVEL__7 BIT21 |
| #define DCV_LEVEL__8 BIT22 |
| #define DCV_LEVEL__9 BIT23 |
| #define DCV_LEVEL__11 BIT24 |
| // Note that an "AND" feature doesn't make any sense, levels are mutually exclusive. |
| |
| // An error check value. |
| #define VALID_DEEMPHASIS_LEVELS (DEEMPHASIS_LEVEL_NONE | \ |
| DEEMPHASIS_LEVEL__3 | \ |
| DEEMPHASIS_LEVEL__6 | \ |
| DEEMPHASIS_LEVEL__8 | \ |
| DEEMPHASIS_LEVEL__11 | \ |
| DEEMPHASIS_LEVEL__11_8 | \ |
| DCV_LEVEL_NONE | \ |
| DCV_LEVEL__2 | \ |
| DCV_LEVEL__3 | \ |
| DCV_LEVEL__5 | \ |
| DCV_LEVEL__6 | \ |
| DCV_LEVEL__7 | \ |
| DCV_LEVEL__8 | \ |
| DCV_LEVEL__9 | \ |
| DCV_LEVEL__11) |
| |
| /** |
| * Deemphasis Ht Phy Link Deemphasis. |
| * |
| * This must be in sync with defines above and ::PLATFORM_DEEMPHASIS_LEVEL (agesa.h) |
| */ |
| typedef struct { |
| UINT32 DeemphasisLevelNone:1; ///< The deemphasis level None. |
| UINT32 DeemphasisLevelMinus3:1; ///< The deemphasis level minus 3 db. |
| UINT32 DeemphasisLevelMinus6:1; ///< The deemphasis level minus 6 db. |
| UINT32 DeemphasisLevelMinus8:1; ///< The deemphasis level minus 8 db. |
| UINT32 DeemphasisLevelMinus11:1; ///< The deemphasis level minus 11 db. |
| UINT32 DeemphasisLevelMinus11w8:1; ///< The deemphasis level minus 11 db, minus 8 precursor. |
| UINT32 :(15 - 5); ///< reserved. |
| UINT32 DcvLevelNone:1; ///< The level for DCV None. |
| UINT32 DcvLevelMinus2:1; ///< The level for DCV minus 2 db. |
| UINT32 DcvLevelMinus3:1; ///< The level for DCV minus 3 db. |
| UINT32 DcvLevelMinus5:1; ///< The level for DCV minus 5 db. |
| UINT32 DcvLevelMinus6:1; ///< The level for DCV minus 6 db. |
| UINT32 DcvLevelMinus7:1; ///< The level for DCV minus 7 db. |
| UINT32 DcvLevelMinus8:1; ///< The level for DCV minus 8 db. |
| UINT32 DcvLevelMinus9:1; ///< The level for DCV minus 9 db. |
| UINT32 DcvLevelMinus11:1; ///< The level for DCV minus 11 db. |
| UINT32 :(15 - 8); ///< reserved. |
| } DEEMPHASIS_FEATURES; |
| |
| /** |
| * Deemphasis Ht Phy Link Features. |
| */ |
| typedef union { |
| UINT32 DeemphasisValues; ///< Initialize HT Deemphasis in UINT32. |
| DEEMPHASIS_FEATURES DeemphasisLevels; ///< HT Deemphasis levels. |
| } DEEMPHASIS_FEATS; |
| |
| // Initializer bit patterns for PERFORMANCE_PROFILE_FEATS. |
| #define PERFORMANCE_REFRESH_REQUEST_32B BIT0 |
| #define PERFORMANCE_PROBEFILTER BIT1 |
| #define PERFORMANCE_L3_CACHE BIT2 |
| #define PERFORMANCE_NO_L3_CACHE BIT3 |
| #define PERFORMANCE_MCT_ISOC_VARIABLE BIT4 |
| #define PERFORMANCE_IS_WARM_RESET BIT5 |
| #define PERFORMANCE_VRM_HIGH_SPEED_ENABLE BIT6 |
| #define PERFORMANCE_NB_PSTATES_ENABLE BIT7 |
| #define PERFORMANCE_AND BIT31 |
| |
| #define PERFORMANCE_PROFILE_ALL (PERFORMANCE_REFRESH_REQUEST_32B | \ |
| PERFORMANCE_PROBEFILTER | \ |
| PERFORMANCE_L3_CACHE | \ |
| PERFORMANCE_NO_L3_CACHE | \ |
| PERFORMANCE_MCT_ISOC_VARIABLE | \ |
| PERFORMANCE_IS_WARM_RESET | \ |
| PERFORMANCE_VRM_HIGH_SPEED_ENABLE | \ |
| PERFORMANCE_NB_PSTATES_ENABLE) |
| |
| /** |
| * Performance Profile specific Type Features. |
| * |
| * Register settings for the different control flow modes can have additional dependencies |
| */ |
| typedef struct { |
| UINT32 RefreshRequest32Byte:1; ///< BIT_0. Display Refresh Requests use 32 bytes (32BE). |
| UINT32 ProbeFilter:1; ///< BIT_1 Probe Filter will be enabled. |
| UINT32 L3Cache:1; ///< BIT_2 L3 Cache is present. |
| UINT32 NoL3Cache:1; ///< BIT_3 L3 Cache is NOT present. |
| UINT32 MctIsocVariable:1; ///< BIT_4 Mct Isoc Read Priority set to variable. |
| UINT32 IsWarmReset:1; ///< BIT_5 This boot is on a warm reset, cold reset pass is already completed. |
| UINT32 VrmHighSpeed:1; ///< BIT_6 Select high speed VRM. |
| UINT32 NbPstates:1; ///< BIT_7 Northbridge PStates are enabled |
| UINT32 :(30 - 7); ///< available for future expansion. |
| UINT32 AndPerformanceFeats:1; ///< BIT_31. AND other selected features. |
| } PERFORMANCE_PROFILE_FEATURES; |
| |
| /** |
| * Performance Profile features. |
| */ |
| typedef union { |
| UINT32 PerformanceProfileValue; ///< Initializer value. |
| PERFORMANCE_PROFILE_FEATURES PerformanceProfileFeatures; ///< The performance profile features. |
| } PERFORMANCE_PROFILE_FEATS; |
| |
| /** |
| * Package Type Features |
| * |
| */ |
| typedef struct { |
| UINT32 PkgType0:1; ///< Package Type 0 |
| UINT32 PkgType1:1; ///< Package Type 1 |
| UINT32 PkgType2:1; ///< Package Type 2 |
| UINT32 PkgType3:1; ///< Package Type 3 |
| UINT32 PkgType4:1; ///< Package Type 4 |
| UINT32 PkgType5:1; ///< Package Type 5 |
| UINT32 PkgType6:1; ///< Package Type 6 |
| UINT32 PkgType7:1; ///< Package Type 7 |
| UINT32 PkgType8:1; ///< Package Type 8 |
| UINT32 PkgType9:1; ///< Package Type 9 |
| UINT32 PkgType10:1; ///< Package Type 10 |
| UINT32 PkgType11:1; ///< Package Type 11 |
| UINT32 PkgType12:1; ///< Package Type 12 |
| UINT32 PkgType13:1; ///< Package Type 13 |
| UINT32 PkgType14:1; ///< Package Type 14 |
| UINT32 PkgType15:1; ///< Package Type 15 |
| UINT32 Reserved:15; ///< Package Type Reserved |
| UINT32 ReservedAndFeats:1; ///< BIT_31. AND other selected features. Always zero here. |
| } PACKAGE_TYPE_FEATURES; |
| |
| // Initializer Values for Package Type |
| #define PACKAGE_TYPE_ALL 0xFFFF ///< Package Type apply all packages |
| |
| // Initializer Values for Ht Host Pci Config Registers |
| #define HT_HOST_FEAT_COHERENT BIT0 |
| #define HT_HOST_FEAT_NONCOHERENT BIT1 |
| #define HT_HOST_FEAT_GANGED BIT2 |
| #define HT_HOST_FEAT_UNGANGED BIT3 |
| #define HT_HOST_FEAT_HT3 BIT4 |
| #define HT_HOST_FEAT_HT1 BIT5 |
| #define HT_HOST_AND BIT31 |
| |
| #define HT_HOST_FEATURES_ALL (HT_HOST_FEAT_COHERENT | \ |
| HT_HOST_FEAT_NONCOHERENT | \ |
| HT_HOST_FEAT_GANGED | \ |
| HT_HOST_FEAT_UNGANGED | \ |
| HT_HOST_FEAT_HT3 | \ |
| HT_HOST_FEAT_HT1) |
| |
| /** |
| * HT Host PCI register features. |
| * |
| * Links which are not connected do not match any of these features. |
| */ |
| typedef struct { |
| UINT32 Coherent:1; ///< BIT_0 Apply to links with a coherent connection. |
| UINT32 NonCoherent:1; ///< BIT_1 Apply to links with a non-coherent connection. |
| UINT32 Ganged:1; ///< BIT_2 Apply to links with a ganged connection. |
| UINT32 UnGanged:1; ///< BIT_3 Apply to links with a unganged connection. |
| UINT32 Ht3:1; ///< BIT_4 Apply to links with HT3 frequency (> 1000 MHz) |
| UINT32 Ht1:1; ///< BIT_5 Apply to links with HT1 frequency (< 1200 MHz) |
| UINT32 :(30 - 5); ///< Future expansion. |
| UINT32 AndHtHostFeats:1; ///< BIT_31. AND other selected features. |
| } HT_HOST_FEATURES; |
| |
| /** |
| * HT Host features for table data. |
| */ |
| typedef union { |
| UINT32 HtHostValue; ///< Initializer value. |
| HT_HOST_FEATURES HtHostFeatures; ///< The HT Host Features. |
| } HT_HOST_FEATS; |
| |
| // Core Range Initializer values. |
| #define COUNT_RANGE_LOW 0ul |
| #define COUNT_RANGE_HIGH 0xFFul |
| |
| // A count range matching none is often useful as the second range, matching will then be |
| // based on the first range. A count range all is provided as a first range for default settings. |
| #define COUNT_RANGE_NONE ((((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_HIGH)) << 16) |
| #define COUNT_RANGE_ALL (((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_LOW)) |
| #define IGNORE_FREQ_0 (((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_HIGH)) |
| #define IGNORE_PROCESSOR_0 (((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_HIGH)) |
| |
| #define CORE_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min)) |
| #define CORE_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16) |
| #define PROCESSOR_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min)) |
| #define PROCESSOR_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16) |
| #define DEGREE_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min)) |
| #define DEGREE_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16) |
| #define FREQ_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min)) |
| #define FREQ_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16) |
| #define COMPUTE_UNIT_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min)) |
| #define COMPUTE_UNIT_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16) |
| |
| /** |
| * Count Range Feature, two count ranges for core counts, processor counts, or node counts. |
| */ |
| typedef struct { |
| UINT32 Range0Min:8; ///< The minimum of the first count range. |
| UINT32 Range0Max:8; ///< The maximum of the first count range. |
| UINT32 Range1Min:8; ///< The minimum of the second count range. |
| UINT32 Range1Max:8; ///< The maximum of the second count range. |
| } COUNT_RANGE_FEATURE; |
| |
| /** |
| * Core Count Ranges for table data. |
| * |
| * Provide a pair of core count ranges. If the actual core count is included in either range (OR), |
| * the feature should be considered a match. |
| */ |
| typedef union { |
| UINT32 CoreRangeValue; ///< Initializer value. |
| COUNT_RANGE_FEATURE CoreRanges; ///< The Core Counts. |
| } CORE_COUNT_RANGES; |
| |
| /** |
| * Processor count ranges for table data. |
| * |
| * Provide a pair of processor count ranges. If the actual counts are included in either range (OR), |
| * the feature should be considered a match. |
| */ |
| typedef union { |
| UINT32 ProcessorCountRangeValue; ///< Initializer value. |
| COUNT_RANGE_FEATURE ProcessorCountRanges; ///< The Processor and Node Counts. |
| } PROCESSOR_COUNTS; |
| |
| /** |
| * Compute unit count ranges for table data. |
| * |
| * Provide a pair of compute unit count ranges. If the actual counts are included in either ranges (OR), |
| * the feature should be considered a match. |
| */ |
| typedef union { |
| UINT32 ComputeUnitRangeValue; ///< Initializer value. |
| COUNT_RANGE_FEATURE ComputeUnitRanges; ///< The Processor and Node Counts. |
| } COMPUTE_UNIT_COUNTS; |
| |
| /** |
| * Connectivity count ranges for table data. |
| * |
| * Provide a processor count range and a system degree range. The degree of a system is |
| * the maximum degree of any node. The degree of a node is the number of nodes to which |
| * it is directly connected (not considering width or redundant links). If both the actual |
| * counts are included in each range (AND), the feature should be considered a match. |
| */ |
| typedef union { |
| UINT32 ConnectivityCountRangeValue; ///< Initializer value. |
| COUNT_RANGE_FEATURE ConnectivityCountRanges; ///< The Processor and Degree Counts. |
| } CONNECTIVITY_COUNT; |
| |
| /** |
| * HT Frequency Count Range. |
| * |
| * Provide a pair of Frequency count ranges, with the frequency encoded as an HT Frequency value |
| * (such as would be programmed into the HT Host Link Frequency register). By converting a NB freq, |
| * the same count can be applied for it. If the actual value is included in either range |
| */ |
| typedef union { |
| UINT32 HtFreqCountRangeValue; ///< Initializer value. |
| COUNT_RANGE_FEATURE HtFreqCountRanges; ///< The HT Freq counts. |
| } HT_FREQ_COUNTS; |
| |
| /*------------------------------------------------------------------------------------------*/ |
| /* |
| * The specific data for each table entry. |
| */ |
| /*------------------------------------------------------------------------------------------*/ |
| |
| /** |
| * Make an extra type so we can use compilers that don't support designated initializers. |
| * |
| * All the entry type unions are no more than 5 UINT32's in size. For entry types which are a struct of UINT32's, |
| * this type can be used so that initializers can be declared TABLE_ENTRY_FIELDS, instead of a special non-union type. |
| * A non-union type then has to be cast back to TABLE_ENTRY_FIELDS in order to process the table, and you can't mix |
| * entry types with non-union initializers in the same table with any other type. |
| * |
| * If the entry type contains anything but UINT32's, then it must have a non-union initializer type for creating the |
| * actual tables. For example, MSR entry has UINT64 and workaround entry has a function pointer. |
| */ |
| typedef UINT32 GENERIC_TYPE_ENTRY_INITIALIZER[MAX_ENTRY_TYPE_ITEMS32]; |
| |
| /** |
| * Table Entry Data for MSR Registers. |
| * |
| * Apply data to register after mask, for MSRs. |
| */ |
| typedef struct { |
| UINT32 Address; ///< MSR address |
| UINT64 Data; ///< Data to set in the MSR |
| UINT64 Mask; ///< Mask to be applied to the MSR. Set every bit of all updated fields. |
| } MSR_TYPE_ENTRY_DATA; |
| |
| /** |
| * Table Entry Data for PCI Registers. |
| * |
| * Apply data to register after mask, for PCI Config registers. |
| */ |
| typedef struct { |
| PCI_ADDR Address; ///< Address should contain Function, Offset only. It will apply to all CPUs |
| UINT32 Data; ///< Data to be written into PCI device |
| UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields. |
| } PCI_TYPE_ENTRY_DATA; |
| |
| /** |
| * Table Entry Data for HT Phy Registers. |
| * |
| * Apply data to register after mask, for HT Phy registers, repeated for all active links. |
| */ |
| typedef struct { |
| HT_PHY_LINK_FEATS TypeFeats; ///< HT Phy Link Features |
| UINT32 Address; ///< Address of Ht Phy Register |
| UINT32 Data; ///< Data to be written into PCI device |
| UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields. |
| } HT_PHY_TYPE_ENTRY_DATA; |
| |
| /** |
| * Table Entry Data for HT Phy Register Ranges. |
| * |
| * Apply data to register after mask, for a range of HT Phy registers, repeated for all active links. |
| */ |
| typedef struct { |
| HT_PHY_LINK_FEATS TypeFeats; ///< HT Phy Link Features |
| UINT32 LowAddress; ///< Low address of Ht Phy Register range. |
| UINT32 HighAddress; ///< High address of register range. |
| UINT32 Data; ///< Data to be written into PCI device. |
| UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields. |
| } HT_PHY_RANGE_TYPE_ENTRY_DATA; |
| |
| /** |
| * Table Entry Data for HT Phy Deemphasis Registers. |
| * |
| * Apply data to register after mask, for HT Phy registers, repeated for all active links. |
| */ |
| typedef struct { |
| DEEMPHASIS_FEATS Levels; ///< The DCV and Deemphasis levels to match |
| HT_PHY_TYPE_ENTRY_DATA HtPhyEntry; ///< The HT Phy Entry to set the deemphasis values |
| } DEEMPHASIS_HT_PHY_TYPE_ENTRY_DATA; |
| |
| /** |
| * Table Entry Date for HT Phy Frequency Count Register updates. |
| * |
| * Compare the NB freq to a range, the HT freq to a range, the link features. |
| * Apply data to register after mask, if all three matched. |
| */ |
| typedef struct { |
| HT_FREQ_COUNTS HtFreqCounts; ///< Specify the HT Frequency range. |
| HT_FREQ_COUNTS NbFreqCounts; ///< Specify the NB Frequency range. |
| HT_PHY_TYPE_ENTRY_DATA HtPhyEntry; ///< The HT Phy register update to perform. |
| } HT_PHY_FREQ_TYPE_ENTRY_DATA; |
| |
| /** |
| * Table Entry Data for Profile Fixup Registers. |
| * |
| * If TypeFeats matches current config, apply data to register after mask for PCI Config registers. |
| */ |
| typedef struct { |
| PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features. |
| PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data. |
| } PROFILE_FIXUP_TYPE_ENTRY_DATA; |
| |
| /** |
| * A variation of PCI register for the HT Host registers. |
| * |
| * A setting to the HT Host buffer counts needs to be made to all the registers for |
| * all the links. There are also link specific criteria to check. |
| */ |
| typedef struct { |
| HT_HOST_FEATS TypeFeats; ///< Link Features. |
| PCI_ADDR Address; ///< Address of PCI Register to Fixed Up. |
| UINT32 Data; ///< Data to be written into PCI device |
| UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields. |
| } HT_HOST_PCI_TYPE_ENTRY_DATA; |
| |
| /** |
| * A variation of PCI register for the HT Host performance registers. |
| * |
| * A setting to the HT Host buffer counts needs to be made to all the registers for |
| * all the links. There are also link specific criteria to check. |
| */ |
| typedef struct { |
| PERFORMANCE_PROFILE_FEATS PerformanceFeats; ///< Performance Profile features. |
| HT_HOST_PCI_TYPE_ENTRY_DATA HtHostEntry; ///< Link Features. |
| } HT_HOST_PERFORMANCE_PCI_TYPE_ENTRY_DATA; |
| |
| /** |
| * A variation of HT Host PCI register for the Link Token registers. |
| * |
| * Use Link Features, Performance Fixup features, and processor counts to match entries. |
| * Link Features are iterated through the connected links. All the matching Link Token count |
| * registers are updated. |
| */ |
| typedef struct { |
| CONNECTIVITY_COUNT ConnectivityCount; ///< Specify Processor count and Degree count range. |
| PERFORMANCE_PROFILE_FEATS PerformanceFeats; ///< Performance Profile features. |
| HT_HOST_FEATS LinkFeats; ///< Link Features. |
| PCI_ADDR Address; ///< Address of PCI Register to Fixed Up. |
| UINT32 Data; ///< Data to be written into PCI device |
| UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields. |
| } HT_TOKEN_PCI_REGISTER; |
| |
| /** |
| * Core Count dependent PCI registers. |
| * |
| */ |
| typedef struct { |
| PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features. |
| CORE_COUNT_RANGES CoreCounts; ///< Specify up to two core count ranges to match. |
| PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data. |
| } CORE_COUNTS_PCI_TYPE_ENTRY_DATA; |
| |
| /** |
| * Processor Count dependent PCI registers. |
| * |
| */ |
| typedef struct { |
| PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features. |
| PROCESSOR_COUNTS ProcessorCounts; ///< Specify a processor count range. |
| PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data. |
| } PROCESSOR_COUNTS_PCI_TYPE_ENTRY_DATA; |
| |
| /** |
| * Compute Unit Count dependent PCI registers. |
| * |
| */ |
| typedef struct { |
| PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features. |
| COMPUTE_UNIT_COUNTS ComputeUnitCounts; ///< Specify a compute unit count range. |
| PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data. |
| } COMPUTE_UNIT_COUNTS_PCI_TYPE_ENTRY_DATA; |
| |
| /** |
| * System connectivity dependent PCI registers. |
| * |
| * The topology specific recommended settings are based on the different connectivity of nodes |
| * in each configuration: the more connections, the fewer resources each connection gets. |
| * The connectivity criteria translate as: |
| * - 2 Socket, half populated == Degree 1 |
| * - 4 Socket, half populated == Degree 2 |
| * - 2 Socket, fully populated == Degree 3 |
| * - 4 Socket, fully populated == Degree > 3. (4 or 5 if 3P, 6 if 4P) |
| * |
| */ |
| typedef struct { |
| PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features. |
| CONNECTIVITY_COUNT ConnectivityCount; ///< Specify a system degree range. |
| PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data. |
| } CONNECTIVITY_COUNTS_PCI_TYPE_ENTRY_DATA; |
| |
| /** |
| * A Family Specific Workaround method. |
| * |
| * \@TableTypeFamSpecificInstances. |
| * |
| * When called, the entry's CPU Logical ID and Platform Features matched the current config. |
| * The method must implement any specific criteria checking for the workaround. |
| * |
| * See if you can use the other entries or make an entry specifically for the fix. |
| * After all, the purpose of having a table entry is to @b NOT have code which |
| * isn't generic feature code, but is family/model specific. |
| * |
| * @param[in] Data The table data value, for example to indicate which CPU and Platform types matched. |
| * @param[in] StdHeader Config params for library, services. |
| */ |
| typedef VOID F_FAM_SPECIFIC_WORKAROUND ( |
| IN UINT32 Data, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| /// Reference to a method. |
| typedef F_FAM_SPECIFIC_WORKAROUND *PF_FAM_SPECIFIC_WORKAROUND; |
| |
| /** |
| * Table Entry Data for Family Specific Workarounds. |
| * |
| * See if you can use the other entries or make an entry specifically for the fix. |
| * After all, the purpose of having a table entry is to @b NOT have code which |
| * isn't generic feature code, but is family/model specific. |
| * |
| * Call DoAction passing Data. |
| */ |
| typedef struct { |
| PF_FAM_SPECIFIC_WORKAROUND DoAction; ///< A function implementing the workaround. |
| UINT32 Data; ///< This data is passed to DoAction(). |
| } FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_DATA; |
| |
| /** |
| * Package Type Features |
| * |
| * FamilyPackageType are various among CPU families. |
| * |
| */ |
| typedef union { |
| UINT32 PackageTypeValue; ///< Package Type |
| PACKAGE_TYPE_FEATURES FamilyPackageType; ///< Package Type of CPU family |
| } PACKAGE_TYPE_FEATS; |
| |
| /** |
| * HT Features dependent Global PCI registers. |
| * |
| */ |
| typedef struct { |
| HT_HOST_FEATS LinkFeats; ///< Link Features. |
| PACKAGE_TYPE_FEATS PackageType; ///< Package Type |
| PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data. |
| } HT_FEATURES_PCI_TYPE_ENTRY_DATA; |
| |
| /** |
| * Table Entry Data for HT Phy Registers which depend on performance profile features. |
| * |
| * Match performance profile features and link features. |
| * Apply data to register after mask, for HT Phy registers, repeated for all active links. |
| */ |
| typedef struct { |
| PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features. |
| HT_PHY_TYPE_ENTRY_DATA HtPhyEntry; ///< The HT Phy Entry to set the deemphasis values |
| } PROFILE_HT_PHY_TYPE_ENTRY_DATA; |
| |
| /** |
| * HT Link PCI registers that are not in the HT Host capability. |
| * |
| * Some HT Link registers have an instance per link, but are just sequential. Specify the base register |
| * in the table register address (link 0 sublink 0). |
| */ |
| typedef struct { |
| HT_HOST_FEATS LinkFeats; ///< Link Features. |
| PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data. |
| } HT_LINK_PCI_TYPE_ENTRY_DATA; |
| |
| /*------------------------------------------------------------------------------------------*/ |
| /* |
| * A complete register table and table entries. |
| */ |
| /*------------------------------------------------------------------------------------------*/ |
| |
| /** |
| * All the available entry data types. |
| */ |
| typedef union { |
| GENERIC_TYPE_ENTRY_INITIALIZER InitialValues; ///< Not a valid entry type; as the first union item, |
| ///< it can be used with initializers. |
| MSR_TYPE_ENTRY_DATA MsrEntry; ///< Msr entry. |
| PCI_TYPE_ENTRY_DATA PciEntry; ///< PCI entry. |
| FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_DATA FamSpecificEntry; ///< Family Specific Workaround entry. |
| HT_PHY_TYPE_ENTRY_DATA HtPhyEntry; ///< HT Phy entry. |
| HT_PHY_RANGE_TYPE_ENTRY_DATA HtPhyRangeEntry; ///< A range of Ht Phy Registers |
| DEEMPHASIS_HT_PHY_TYPE_ENTRY_DATA DeemphasisEntry; ///< A HT Deemphasis level's settings. |
| HT_PHY_FREQ_TYPE_ENTRY_DATA HtPhyFreqEntry; ///< A frequency dependent Ht Phy Register setting. |
| PROFILE_FIXUP_TYPE_ENTRY_DATA FixupEntry; ///< Profile Fixup entry. |
| HT_HOST_PCI_TYPE_ENTRY_DATA HtHostEntry; ///< HT Host PCI entry. |
| HT_HOST_PERFORMANCE_PCI_TYPE_ENTRY_DATA HtHostPerfEntry; ///< HT Host Performance PCI entry |
| HT_TOKEN_PCI_REGISTER HtTokenEntry; ///< HT Link Token Count entry. |
| CORE_COUNTS_PCI_TYPE_ENTRY_DATA CoreCountEntry; ///< Core count dependent settings. |
| PROCESSOR_COUNTS_PCI_TYPE_ENTRY_DATA ProcCountEntry; ///< Processor count entry. |
| COMPUTE_UNIT_COUNTS_PCI_TYPE_ENTRY_DATA CompUnitCountEntry; ///< Compute unit count dependent entry. |
| CONNECTIVITY_COUNTS_PCI_TYPE_ENTRY_DATA TokenPciEntry; ///< System connectivity dependent Token register. |
| HT_FEATURES_PCI_TYPE_ENTRY_DATA HtFeatPciEntry; ///< HT Features PCI entry. |
| PROFILE_HT_PHY_TYPE_ENTRY_DATA HtPhyProfileEntry; ///< Performance dependent HT Phy register. |
| HT_LINK_PCI_TYPE_ENTRY_DATA HtLinkPciEntry; ///< Per Link, non HT Host, PCI registers. |
| } TABLE_ENTRY_DATA; |
| |
| /** |
| * Register Table Entry common fields. |
| * |
| * All the various types of register table entries are subclasses of this object. |
| */ |
| typedef struct { |
| TABLE_ENTRY_TYPE EntryType; ///< The type of table entry this is. |
| CPU_LOGICAL_ID CpuRevision; ///< Common CPU Logical ID match criteria. |
| PLATFORM_FEATS Features; ///< Common Platform Features match criteria. |
| TABLE_ENTRY_DATA Entry; ///< The type dependent entry data (ex. register, data, mask). |
| } TABLE_ENTRY_FIELDS; |
| |
| /** |
| * An entire register table. |
| */ |
| typedef struct { |
| TABLE_CORE_SELECTOR Selector; ///< For efficiency, these cores should process this table |
| UINTN NumberOfEntries; ///< The number of entries in the table. |
| CONST TABLE_ENTRY_FIELDS *Table; ///< The table entries. |
| } REGISTER_TABLE; |
| |
| /*------------------------------------------------------------------------------------------*/ |
| /* |
| * Describe implementers for table entries. |
| */ |
| /*------------------------------------------------------------------------------------------*/ |
| |
| /** |
| * Implement the semantics of a Table Entry Type. |
| * |
| * @TableEntryTypeInstances. |
| * |
| * @param[in] CurrentEntry The type specific entry data to be implemented (that is written). |
| * @param[in] PlatformConfig Config handle for platform specific information |
| * @param[in] StdHeader Config params for library, services. |
| */ |
| typedef VOID F_DO_TABLE_ENTRY ( |
| IN TABLE_ENTRY_DATA *CurrentEntry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| /// Reference to a method |
| typedef F_DO_TABLE_ENTRY *PF_DO_TABLE_ENTRY; |
| |
| /** |
| * Describe the attributes of a Table Entry Type. |
| */ |
| typedef struct { |
| TABLE_ENTRY_TYPE EntryType; ///< The type of table entry this describes. |
| PF_DO_TABLE_ENTRY DoTableEntry; ///< Provide all semantics associated with TABLE_ENTRY_DATA |
| } TABLE_ENTRY_TYPE_DESCRIPTOR; |
| |
| /*------------------------------------------------------------------------------------------*/ |
| /* |
| * Non-union initializers for entry data which is not just UINT32. |
| */ |
| /*------------------------------------------------------------------------------------------*/ |
| |
| /** |
| * A union of data types, that can be initialized with MSR data. |
| * |
| * This ensures the entry data is the same size as TABLE_ENTRY_DATA. |
| */ |
| typedef union { |
| MSR_TYPE_ENTRY_DATA MsrInitializer; ///< The data in the table initializer is assigned to this member. |
| TABLE_ENTRY_DATA Reserved; ///< Make sure the size is the same as the real union. |
| } MSR_DATA_INITIALIZER; |
| |
| /** |
| * A type suitable for an initializer for MSR Table entries. |
| */ |
| typedef struct { |
| TABLE_ENTRY_TYPE Type; ///< The type of table entry this is. |
| CPU_LOGICAL_ID CpuRevision; ///< Common CPU Logical ID match criteria. |
| PLATFORM_FEATS Features; ///< Common Platform Features match criteria. |
| MSR_DATA_INITIALIZER EntryData; ///< The special union which accepts msr data initializer. |
| } MSR_TYPE_ENTRY_INITIALIZER; |
| |
| /** |
| * A union of data types, that can be initialized with Family Specific Workaround data. |
| * |
| * This ensures the entry data is the same size as TABLE_ENTRY_DATA. |
| */ |
| typedef union { |
| FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_DATA FamSpecificInitializer; ///< The data in the table initializer is assigned to this member. |
| TABLE_ENTRY_DATA Reserved; ///< Make sure the size is the same as the real union. |
| } FAM_SPECIFIC_WORKAROUND_DATA_INITIALIZER; |
| |
| /** |
| * A type suitable for an initializer for Family Specific Workaround Table entries. |
| */ |
| typedef struct { |
| TABLE_ENTRY_TYPE Type; ///< The type of table entry this is. |
| CPU_LOGICAL_ID CpuRevision; ///< Common CPU Logical ID match criteria. |
| PLATFORM_FEATS Features; ///< Common Platform Features match criteria. |
| FAM_SPECIFIC_WORKAROUND_DATA_INITIALIZER EntryData; ///< Special union accepts family specific workaround data initializer. |
| } FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER; |
| |
| /*------------------------------------------------------------------------------------------*/ |
| /* |
| * Table related function prototypes (many are instance of F_DO_TABLE_ENTRY method). |
| */ |
| /*------------------------------------------------------------------------------------------*/ |
| |
| /** |
| * Set the registers for this core based on entries in a list of Register Tables. |
| */ |
| VOID SetRegistersFromTables ( |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Find the features of the running platform. |
| */ |
| VOID |
| GetPlatformFeatures ( |
| OUT PLATFORM_FEATS *Features, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Checks register table entry type specific criteria to the platform. |
| */ |
| BOOLEAN |
| DoesEntryTypeSpecificInfoMatch ( |
| IN UINT32 PlatformTypeSpecificFeatures, |
| IN UINT32 EntryTypeFeatures |
| ); |
| |
| /** |
| * Perform the MSR Register Entry. |
| */ |
| VOID |
| SetRegisterForMsrEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForPciEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the Performance Profile PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForPerformanceProfileEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the HT Host PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForHtHostEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the HT Host Performance PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForHtHostPerfEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Set the HT Link Token Count registers. |
| */ |
| VOID |
| SetRegisterForHtLinkTokenEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the Core Counts Performance PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForCoreCountsPerformanceEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the Processor Counts PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForProcessorCountsEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the Compute Unit Counts PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForComputeUnitCountsEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the Family Specific Workaround Register Entry. |
| */ |
| VOID |
| SetRegisterForFamSpecificWorkaroundEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Program HT Phy PCI registers. |
| */ |
| VOID |
| SetRegisterForHtPhyEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Program a range of HT Phy PCI registers. |
| */ |
| VOID |
| SetRegisterForHtPhyRangeEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Program Deemphasis registers, for the platform specified levels. |
| */ |
| VOID |
| SetRegisterForDeemphasisEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Program HT Phy PCI registers which have complex frequency dependencies. |
| */ |
| VOID |
| SetRegisterForHtPhyFreqEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the Processor Token Counts PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForTokenPciEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the HT Link Feature PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForHtFeaturePciEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the HT Phy Performance Profile Register Entry. |
| */ |
| VOID |
| SetRegisterForHtPhyProfileEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Perform the HT Link PCI Register Entry. |
| */ |
| VOID |
| SetRegisterForHtLinkPciEntry ( |
| IN TABLE_ENTRY_DATA *Entry, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| /** |
| * Compare counts to a pair of ranges. |
| */ |
| BOOLEAN |
| IsEitherCountInRange ( |
| IN UINTN FirstCount, |
| IN UINTN SecondCount, |
| IN COUNT_RANGE_FEATURE Ranges |
| ); |
| |
| /** |
| * Returns the performance profile features list of the currently running processor core. |
| */ |
| VOID |
| GetPerformanceFeatures ( |
| OUT PERFORMANCE_PROFILE_FEATS *Features, |
| IN PLATFORM_CONFIGURATION *PlatformConfig, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| #endif // _CPU_TABLE_H_ |
| |