soc/intel: convert XTAL frequency constant to Kconfig
This converts the constant for the XTAL frequency to a Kconfig option.
Change-Id: I1382dd274eeb9cb748f94c34f5d9a83880624c18
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/src/soc/intel/icelake/Kconfig b/src/soc/intel/icelake/Kconfig
index 027ed7d..21da528 100644
--- a/src/soc/intel/icelake/Kconfig
+++ b/src/soc/intel/icelake/Kconfig
@@ -127,6 +127,9 @@
int
default 120
+config CPU_XTAL_HZ
+ default 38400000
+
config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
int
default 133
diff --git a/src/soc/intel/icelake/cpu.c b/src/soc/intel/icelake/cpu.c
index 2823fd7..e76f61f 100644
--- a/src/soc/intel/icelake/cpu.c
+++ b/src/soc/intel/icelake/cpu.c
@@ -105,15 +105,17 @@
static void enable_pm_timer_emulation(void)
{
- /* ACPI PM timer emulation */
msr_t msr;
+
+ if (!CONFIG_CPU_XTAL_HZ)
+ return;
+
/*
* The derived frequency is calculated as follows:
- * (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
- * Back solve the multiplier so the 3.579545MHz ACPI timer
- * frequency is used.
+ * (clock * msr[63:32]) >> 32 = target frequency.
+ * Back solve the multiplier so the 3.579545MHz ACPI timer frequency is used.
*/
- msr.hi = (3579545ULL << 32) / CTC_FREQ;
+ msr.hi = (3579545ULL << 32) / CONFIG_CPU_XTAL_HZ;
/* Set PM1 timer IO port and enable */
msr.lo = (EMULATE_DELAY_VALUE << EMULATE_DELAY_OFFSET_VALUE) |
EMULATE_PM_TMR_EN | (ACPI_BASE_ADDRESS + PM1_TMR);
diff --git a/src/soc/intel/icelake/include/soc/cpu.h b/src/soc/intel/icelake/include/soc/cpu.h
index a231333..5dc22de 100644
--- a/src/soc/intel/icelake/include/soc/cpu.h
+++ b/src/soc/intel/icelake/include/soc/cpu.h
@@ -21,9 +21,6 @@
#define C9_POWER 0xc8
#define C10_POWER 0xc8
-/* Common Timer Copy (CTC) frequency - 38.4MHz. */
-#define CTC_FREQ 38400000
-
#define C_STATE_LATENCY_MICRO_SECONDS(limit, base) \
(((1 << ((base)*5)) * (limit)) / 1000)
#define C_STATE_LATENCY_FROM_LAT_REG(reg) \