| chip soc/intel/cannonlake |
| register "power_limits_config" = "{ |
| .tdp_pl1_override = 15, |
| .tdp_pl2_override = 64, |
| }" |
| |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, |
| [PchSerialIoIndexI2C3] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C4] = PchSerialIoPci, |
| [PchSerialIoIndexSPI0] = PchSerialIoPci, |
| [PchSerialIoIndexSPI2] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART0] = PchSerialIoSkipInit, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| register "usb2_ports[2]" = "USB2_PORT_LONG(OC_SKIP)" # SD CARD |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD CARD |
| |
| # No PCIe WiFi |
| register "PcieRpEnable[13]" = "0" |
| |
| # Intel Common SoC Config |
| #+-------------------+---------------------------+ |
| #| Field | Value | |
| #+-------------------+---------------------------+ |
| #| I2C0 | Trackpad | |
| #| I2C1 | Touchscreen | |
| #| I2C2 | 2nd Touchscreen | |
| #| I2C4 | Audio | |
| #+-------------------+---------------------------+ |
| register "common_soc_config" = "{ |
| .i2c[0] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 50, |
| .fall_time_ns = 15, |
| .data_hold_time_ns = 330, |
| }, |
| .i2c[1] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 60, |
| .fall_time_ns = 25, |
| }, |
| .i2c[2] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 60, |
| .fall_time_ns = 25, |
| }, |
| .i2c[4] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 120, |
| .fall_time_ns = 120, |
| }, |
| }" |
| |
| device domain 0 on |
| device pci 02.0 on # Integrated Graphics Device |
| register "gfx" = "GMA_DEFAULT_PANEL(0)" |
| end |
| device pci 14.0 on |
| chip drivers/usb/acpi |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""Micro SD Card"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 2.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Left Type-A Port"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 2.3 on end |
| end |
| chip drivers/usb/acpi |
| # No WWAN |
| device usb 2.5 off end |
| end |
| chip drivers/usb/acpi |
| # No Right Tpype-C port |
| device usb 3.1 off end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Micro SD card"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 3.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Left Type-A Port 1"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 3.3 on end |
| end |
| end |
| end |
| end |
| |
| device pci 15.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0000"" |
| register "desc" = ""ELAN Touchpad"" |
| register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_A21_IRQ)" |
| register "wake" = "GPE0_DW0_21" |
| device i2c 15 on end |
| end |
| end |
| |
| device pci 15.1 on |
| chip drivers/i2c/hid |
| register "generic.hid" = ""ELAN9008"" |
| register "generic.desc" = ""ELAN Touchscreen USI"" |
| register "generic.irq" = |
| "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" |
| register "generic.detect" = "1" |
| register "generic.enable_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" |
| register "generic.enable_delay_ms" = "12" |
| register "generic.enable_off_delay_ms" = "10" |
| register "generic.has_power_resource" = "1" |
| register "generic.stop_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)" |
| register "generic.stop_delay_ms" = "15" |
| register "generic.stop_off_delay_ms" = "5" |
| register "hid_desc_reg_offset" = "0x01" |
| device i2c 10 on end |
| end |
| end # I2C 1 |
| |
| device pci 15.2 on |
| chip drivers/i2c/hid |
| register "generic.hid" = ""ELAN9009"" |
| register "generic.desc" = ""ELAN Touchscreen USI"" |
| register "generic.irq" = |
| "ACPI_IRQ_EDGE_LOW(GPP_C7_IRQ)" |
| register "generic.detect" = "1" |
| register "generic.enable_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D10)" |
| register "generic.enable_delay_ms" = "12" |
| register "generic.enable_off_delay_ms" = "10" |
| register "generic.has_power_resource" = "1" |
| register "generic.stop_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" |
| register "generic.stop_delay_ms" = "15" |
| register "generic.stop_off_delay_ms" = "5" |
| register "hid_desc_reg_offset" = "0x01" |
| device i2c 10 on end |
| end |
| end #I2C 2 |
| device pci 19.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Realtek RT5682"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" |
| register "property_count" = "1" |
| # Set the jd_src to RT5668_JD1 for jack detection |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1011"" |
| register "desc" = ""RT1011 Tweeter Left Speaker Amp"" |
| register "uid" = "0" |
| register "name" = ""TL"" |
| device i2c 38 on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1011"" |
| register "desc" = ""RT1011 Tweeter Right Speaker Amp"" |
| register "uid" = "1" |
| register "name" = ""TR"" |
| device i2c 39 on end |
| end |
| end #I2C #4 |
| |
| device pci 1f.3 on |
| chip drivers/generic/max98357a |
| register "hid" = ""MX98357A"" |
| register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H3)" |
| register "sdmode_delay" = "5" |
| device generic 0 on end |
| end |
| end # Intel I2S |
| end |
| end |