| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <stdint.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ids.h> |
| #include <arch/io.h> |
| #include <device/pnp_def.h> |
| #include <arch/romcc_io.h> |
| #include <arch/hlt.h> |
| #include <pc80/mc146818rtc.h> |
| #include <console/console.h> |
| #include <lib.h> |
| #include "northbridge/via/cn700/raminit.h" |
| #include "cpu/x86/bist.h" |
| #include "pc80/udelay_io.c" |
| #include "lib/delay.c" |
| #include "southbridge/via/vt8237r/vt8237r_early_smbus.c" |
| #include "superio/ite/it8716f/it8716f_early_serial.c" |
| |
| #define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1) |
| |
| static int spd_read_byte(u16 device, u16 address) |
| { |
| return smbus_read_byte(device, address); |
| } |
| |
| #include "northbridge/via/cn700/raminit.c" |
| |
| static const struct mem_controller ctrl = { |
| .d0f0 = 0x0000, |
| .d0f2 = 0x2000, |
| .d0f3 = 0x3000, |
| .d0f4 = 0x4000, |
| .d0f7 = 0x7000, |
| .d1f0 = 0x8000, |
| .channel0 = { DIMM0 }, /* TODO: CN700 currently only supports 1 DIMM. */ |
| }; |
| |
| void main(unsigned long bist) |
| { |
| /* Enable multifunction for northbridge. */ |
| pci_write_config8(ctrl.d0f0, 0x4f, 0x01); |
| |
| it8716f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); |
| uart_init(); |
| console_init(); |
| |
| enable_smbus(); |
| smbus_fixup(&ctrl); |
| |
| /* Halt if there was a built-in self test failure. */ |
| report_bist_failure(bist); |
| |
| ddr_ram_setup(&ctrl); |
| |
| /* ram_check(0, 640 * 1024); */ |
| } |
| |