| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2008-2010 Joseph Smith <joe@settoplinux.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <device/pci_def.h> |
| #include <arch/io.h> |
| #include <device/pnp_def.h> |
| #include <arch/romcc_io.h> |
| #include <arch/hlt.h> |
| #include <arch/llshell.h> |
| #include "pc80/udelay_io.c" |
| #include <console/console.h> |
| #include <lib.h> |
| #include "superio/smsc/smscsuperio/smscsuperio_early_serial.c" |
| #include "northbridge/intel/i82830/raminit.h" |
| #include "northbridge/intel/i82830/memory_initialized.c" |
| #include "southbridge/intel/i82801dx/i82801dx.h" |
| #include "southbridge/intel/i82801dx/i82801dx_reset.c" |
| #include "cpu/x86/bist.h" |
| #include "spd_table.h" |
| #include "gpio.c" |
| |
| #define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) |
| |
| #include "southbridge/intel/i82801dx/i82801dx_early_smbus.c" |
| #include "southbridge/intel/i82801dx/i82801dx_tco_timer.c" |
| |
| /** |
| * The onboard 64MB PC133 memory does not have a SPD EEPROM so the |
| * values have to be set manually, the SO-DIMM socket is located in |
| * socket0 (0x50/DIMM0), and the onboard memory is located in socket1 |
| * (0x51/DIMM1). |
| */ |
| static inline int spd_read_byte(unsigned device, unsigned address) |
| { |
| int i; |
| |
| if (device == DIMM0) { |
| return smbus_read_byte(device, address); |
| } else if (device == DIMM1) { |
| for (i = 0; i < ARRAY_SIZE(spd_table); i++) { |
| if (spd_table[i].address == address) |
| return spd_table[i].data; |
| } |
| return 0xFF; /* Return 0xFF when address is not found. */ |
| } else { |
| return 0xFF; /* Return 0xFF on any failures. */ |
| } |
| } |
| |
| #include "northbridge/intel/i82830/raminit.c" |
| |
| /** |
| * Setup mainboard specific registers pre raminit. |
| */ |
| static void mb_early_setup(void) |
| { |
| /* - Hub Interface to PCI Bridge Registers - */ |
| /* 12-Clock Retry Enable */ |
| pci_write_config16(PCI_DEV(0, 0x1e, 0), 0x50, 0x1402); |
| /* Master Latency Timer Count */ |
| pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); |
| /* I/O Address Base */ |
| pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1c, 0xf0); |
| |
| /* - LPC Interface Bridge Registers - */ |
| /* Delayed Transaction Enable */ |
| pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xd0, 0x00000002); |
| /* Disable the TCO Timer system reboot feature */ |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xd4, 0x02); |
| /* CPU Frequency Strap */ |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xd5, 0x02); |
| /* ACPI base address and enable Resource Indicator */ |
| pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, (PMBASE_ADDR | 1)); |
| /* Enable the SMBUS */ |
| enable_smbus(); |
| /* ACPI Enable */ |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), ACPI_CNTL, 0x10); |
| } |
| |
| void main(unsigned long bist) |
| { |
| if (bist == 0) { |
| if (memory_initialized()) { |
| hard_reset(); |
| } |
| } |
| |
| /* Set southbridge and superio gpios */ |
| mb_gpio_init(); |
| |
| smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); |
| uart_init(); |
| console_init(); |
| |
| /* Halt if there was a built in self test failure. */ |
| report_bist_failure(bist); |
| |
| /* disable TCO timers */ |
| i82801dx_halt_tco_timer(); |
| |
| /* Setup mainboard specific registers */ |
| mb_early_setup(); |
| |
| /* Initialize memory */ |
| sdram_initialize(); |
| |
| #if CONFIG_LLSHELL |
| llshell(); |
| #endif |
| /* Check RAM. */ |
| /* ram_check(0, 640 * 1024); */ |
| /* ram_check(64512 * 1024, 65536 * 1024); */ |
| } |
| |