# | |
# Set JtagCtrl to 1 to reenable Jtag | |
# | |
JtagCtrl = 0; | |
# | |
# Fill in chip unique id | |
# | |
# ChipUid can be found by running tegrarcm in tegra recovery mode | |
# (also hooking up A-A USB cable) and looking for console output | |
# on line starting with "Chip UID:" | |
# | |
# Command example: | |
# $ sudo tegrarcm --bct=/build/nyan/firmware/bct/board.bct --bootloader=/build/nyan/firmware/u-boot.bin --loadaddr=0x80108000 | |
# Where board.bct and u-boot.bin do not have to be prebuilt. | |
# | |
ChipUid = 0x00000000000000000000000000000000; |