src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb

chip soc/intel/skylake

	# GPE configuration
	# Note that GPE events called out in ASL code rely on this
	# route. i.e. If this route changes then the affected GPE
	# offset bits also need to be changed.
	register "gpe0_dw0" = "GPP_B"
	register "gpe0_dw1" = "GPP_D"
	register "gpe0_dw2" = "GPP_E"

	register "gen1_dec" = "0x007c0a01"	# Super IO SWC
	register "gen2_dec" = "0x000c0ca1"	# IPMI KCS

	# Additional FSP Configuration
	# This board has an IGD with no output.
	register "PrimaryDisplay" = "Display_Auto"

	# USB configuration
	# USB2/3
	register "usb2_ports[0]"	= "USB2_PORT_MID(OC0)"
	register "usb2_ports[1]"	= "USB2_PORT_MID(OC0)"

	# ?
	register "usb2_ports[14]"	= "USB2_PORT_MID(OC0)"
	register "usb2_ports[15]"	= "USB2_PORT_MID(OC0)"

	# USB4/5
	register "usb2_ports[2]"	= "USB2_PORT_MID(OC1)"
	register "usb2_ports[3]"	= "USB2_PORT_MID(OC1)"

	# USB0/1
	register "usb2_ports[4]"	= "USB2_PORT_MID(OC2)"
	register "usb2_ports[5]"	= "USB2_PORT_MID(OC2)"

	# USB9/10 (USB3.0)
	register "usb2_ports[8]"	= "USB2_PORT_MID(OC3)"
	register "usb2_ports[12]"	= "USB2_PORT_MID(OC3)"
	register "usb3_ports[3]"	= "USB3_PORT_DEFAULT(OC3)"
	register "usb3_ports[4]"	= "USB3_PORT_DEFAULT(OC3)"

	# USB6/7 (USB3.0)
	register "usb2_ports[10]"	= "USB2_PORT_MID(OC4)"
	register "usb2_ports[11]"	= "USB2_PORT_MID(OC4)"
	register "usb3_ports[1]"	= "USB3_PORT_DEFAULT(OC4)"
	register "usb3_ports[2]"	= "USB3_PORT_DEFAULT(OC4)"

	# USB8 (USB3.0)
	register "usb2_ports[9]"	= "USB2_PORT_MID(OC5)"
	register "usb3_ports[0]"	= "USB3_PORT_DEFAULT(OC5)"

	# IPMI USB HUB
	register "usb2_ports[13]"	= "USB2_PORT_MID(OC_SKIP)"

	device domain 0 on
		device pci 01.0 on
			smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthShort" "CPU SLOT6 PCI-E 3.0 X8(IN X16)" "SlotDataBusWidth8X"
		end			# CPU PCIE Slot (JPCIE3)
		device pci 01.1 on	# CPU PCIE Slot (JPCIE2)
			smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "CPU SLOT6 PCI-E 3.0 X8" "SlotDataBusWidth8X"
		end
		device pci 02.0 on end	# Integrated Graphics Device (No Output)
		device pci 1c.0 on	# PCI Express Port 1
			register "PcieRpEnable[0]" = "1"
			device pci 00.0 on end	# GbE
		end
		device pci 1c.1 on	# PCI Express Port 2
			register "PcieRpEnable[1]" = "1"
			device pci 00.0 on end	# GbE
		end
		device pci 1c.2 on	# PCI Express Port 3 only on -LN4F
			register "PcieRpEnable[2]" = "1"
			device pci 00.0 on end	# GbE
		end
		device pci 1c.3 on	# PCI Express Port 4 only on -LN4F
			register "PcieRpEnable[3]" = "1"
			device pci 00.0 on end	# GbE
		end
		device pci 1c.4 on	# PCI Express Port 5
			register "PcieRpEnable[4]" = "1"
			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2 2280" "SlotDataBusWidth2X"
		end
		device pci 1c.6 on	# PCI Express Port 7
			register "PcieRpEnable[6]" = "1"
			device pci 00.0 on	# Aspeed PCI Bridge
				device pci 00.0 on end	# Aspeed 2400 VGA
			end
		end
		device pci 1d.0 on	# PCI Express Port 9 (Slot JPCIE1)
			register "PcieRpEnable[8]" = "1"
			smbios_slot_desc "SlotTypePciExpressGen3X4" "SlotLengthLong" "PCH SLOT4 PCI-E 3.0 X4(IN X8)" "SlotDataBusWidth4X"
		end
		device pci 1f.0 on	# LPC Interface
			chip drivers/ipmi
				# On cold boot it takes a while for the BMC to start the IPMI service
				register "wait_for_bmc" = "1"
				register "bmc_boot_timeout" = "60"
				device pnp ca2.0 on end	# IPMI KCS
			end
			chip superio/common
				device pnp 2e.0 on
					chip superio/aspeed/ast2400
						device pnp 2e.2 on	# SUART1
							io 0x60 = 0x3f8
							irq 0x70 = 4
							drq 0xf0 = 0x00
						end
						device pnp 2e.3 on	# SUART2
							io 0x60 = 0x2f8
							irq 0x70 = 3
							drq 0xf0 = 0x00
						end
						device pnp 2e.4 on	# SWC
							io 0x60 = 0xa00
							io 0x62 = 0xa10
							io 0x64 = 0xa20
							io 0x66 = 0xa30
							irq 0x70 = 0x00
						end
						device pnp 2e.5 off end	# KBC
						device pnp 2e.7 on	# GPIO
							irq 0x70 = 0x00
						end
						device pnp 2e.b off end	# SUART3
						device pnp 2e.c off end	# SUART4
						device pnp 2e.d on	# iLPC2AHB
							irq 0x70 = 0x00
						end
						device pnp 2e.e on	# Mailbox
							io 0x60 = 0xa40
							irq 0x70 = 0x00
						end
					end
				end
			end
		end
	end
end