| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <assert.h> |
| #include <device/pci_def.h> |
| #include <device/pci.h> |
| #include <cpu/x86/msr.h> |
| #include <console/console.h> |
| #include <fsp/util.h> |
| #include <intelblocks/cpulib.h> |
| #include <intelblocks/pmclib.h> |
| #include <soc/iomap.h> |
| #include <soc/msr.h> |
| #include <soc/pci_devs.h> |
| #include <soc/romstage.h> |
| #include <vendorcode/google/chromeos/chromeos.h> |
| |
| #include "../chip.h" |
| |
| static void soc_memory_init_params(FSPM_UPD *mupd, const config_t *config) |
| { |
| FSP_M_CONFIG *m_cfg = &mupd->FspmConfig; |
| FSP_M_TEST_CONFIG *tconfig = &mupd->FspmTestConfig; |
| |
| unsigned int i; |
| uint32_t mask = 0; |
| const struct device *dev = pcidev_path_on_root(SA_DEVFN_IGD); |
| |
| /* |
| * Probe for no IGD and disable InternalGfx and panel power to prevent a |
| * crash in FSP-M. |
| */ |
| if (dev && dev->enabled && pci_read_config16(SA_DEV_IGD, PCI_VENDOR_ID) != 0xffff) { |
| /* Set IGD stolen size to 64MB. */ |
| m_cfg->InternalGfx = 1; |
| m_cfg->IgdDvmt50PreAlloc = 2; |
| } else { |
| m_cfg->InternalGfx = 0; |
| m_cfg->IgdDvmt50PreAlloc = 0; |
| tconfig->PanelPowerEnable = 0; |
| } |
| m_cfg->TsegSize = CONFIG_SMM_TSEG_SIZE; |
| m_cfg->IedSize = CONFIG_IED_REGION_SIZE; |
| m_cfg->SaGv = config->SaGv; |
| if (CONFIG(SOC_INTEL_CANNONLAKE_PCH_H)) |
| m_cfg->UserBd = BOARD_TYPE_DESKTOP; |
| else |
| m_cfg->UserBd = BOARD_TYPE_ULT_ULX; |
| m_cfg->RMT = config->RMT; |
| |
| for (i = 0; i < ARRAY_SIZE(config->PcieRpEnable); i++) { |
| if (config->PcieRpEnable[i]) |
| mask |= (1 << i); |
| } |
| m_cfg->PcieRpEnableMask = mask; |
| m_cfg->PrmrrSize = get_valid_prmrr_size(); |
| m_cfg->EnableC6Dram = config->enable_c6dram; |
| #if CONFIG(SOC_INTEL_COMETLAKE) |
| m_cfg->SerialIoUartDebugControllerNumber = CONFIG_UART_FOR_CONSOLE; |
| #else |
| m_cfg->PcdSerialIoUartNumber = CONFIG_UART_FOR_CONSOLE; |
| #endif |
| /* |
| * PcdDebugInterfaceFlags |
| * This config will allow coreboot to pass information to the FSP |
| * regarding which debug interface is being used. |
| * Debug Interfaces: |
| * BIT0-RAM, BIT1-Legacy Uart BIT3-USB3, BIT4-LPSS Uart, BIT5-TraceHub |
| * BIT2 - Not used. |
| */ |
| m_cfg->PcdDebugInterfaceFlags = |
| CONFIG(DRIVERS_UART_8250IO) ? 0x02 : 0x10; |
| |
| /* Change VmxEnable UPD value according to ENABLE_VMX Kconfig */ |
| m_cfg->VmxEnable = CONFIG(ENABLE_VMX); |
| |
| m_cfg->SkipMpInit = !CONFIG(USE_INTEL_FSP_MP_INIT); |
| |
| if (config->cpu_ratio_override) { |
| m_cfg->CpuRatio = config->cpu_ratio_override; |
| } else { |
| /* Set CpuRatio to match existing MSR value */ |
| msr_t flex_ratio; |
| flex_ratio = rdmsr(MSR_FLEX_RATIO); |
| m_cfg->CpuRatio = (flex_ratio.lo >> 8) & 0xff; |
| } |
| |
| dev = pcidev_path_on_root(PCH_DEVFN_ISH); |
| /* If ISH is enabled, enable ISH elements */ |
| if (!dev) |
| m_cfg->PchIshEnable = 0; |
| else |
| m_cfg->PchIshEnable = dev->enabled; |
| |
| /* If HDA is enabled, enable HDA elements */ |
| dev = pcidev_path_on_root(PCH_DEVFN_HDA); |
| if (!dev) |
| m_cfg->PchHdaEnable = 0; |
| else |
| m_cfg->PchHdaEnable = dev->enabled; |
| |
| /* Enable IPU only if the device is enabled */ |
| m_cfg->SaIpuEnable = 0; |
| dev = pcidev_path_on_root(SA_DEVFN_IPU); |
| if (dev) |
| m_cfg->SaIpuEnable = dev->enabled; |
| |
| /* SATA Gen3 strength */ |
| for (i = 0; i < SOC_INTEL_CML_SATA_DEV_MAX; i++) { |
| if (config->sata_port[i].RxGen3EqBoostMagEnable) { |
| m_cfg->PchSataHsioRxGen3EqBoostMagEnable[i] = |
| config->sata_port[i].RxGen3EqBoostMagEnable; |
| m_cfg->PchSataHsioRxGen3EqBoostMag[i] = |
| config->sata_port[i].RxGen3EqBoostMag; |
| } |
| if (config->sata_port[i].TxGen3DownscaleAmpEnable) { |
| m_cfg->PchSataHsioTxGen3DownscaleAmpEnable[i] = |
| config->sata_port[i].TxGen3DownscaleAmpEnable; |
| m_cfg->PchSataHsioTxGen3DownscaleAmp[i] = |
| config->sata_port[i].TxGen3DownscaleAmp; |
| } |
| if (config->sata_port[i].TxGen3DeEmphEnable) { |
| m_cfg->PchSataHsioTxGen3DeEmphEnable[i] = |
| config->sata_port[i].TxGen3DeEmphEnable; |
| m_cfg->PchSataHsioTxGen3DeEmph[i] = |
| config->sata_port[i].TxGen3DeEmph; |
| } |
| } |
| #if !CONFIG(SOC_INTEL_COMETLAKE) |
| if (config->DisableHeciRetry) |
| tconfig->DisableHeciRetry = config->DisableHeciRetry; |
| #endif |
| } |
| |
| void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version) |
| { |
| const struct device *dev = pcidev_path_on_root(PCH_DEVFN_LPC); |
| const struct device *smbus = pcidev_path_on_root(PCH_DEVFN_SMBUS); |
| assert(dev != NULL); |
| const config_t *config = config_of(dev); |
| FSP_M_CONFIG *m_cfg = &mupd->FspmConfig; |
| FSP_M_TEST_CONFIG *tconfig = &mupd->FspmTestConfig; |
| |
| soc_memory_init_params(mupd, config); |
| |
| /* Enable SMBus controller based on config */ |
| if (!smbus) |
| m_cfg->SmbusEnable = 0; |
| else |
| m_cfg->SmbusEnable = smbus->enabled; |
| |
| /* Set debug probe type */ |
| m_cfg->PlatformDebugConsent = |
| CONFIG_SOC_INTEL_CANNONLAKE_DEBUG_CONSENT; |
| |
| /* Configure VT-d */ |
| tconfig->VtdDisable = 0; |
| |
| /* Set HECI1 PCI BAR address */ |
| m_cfg->Heci1BarAddress = HECI1_BASE_ADDRESS; |
| |
| mainboard_memory_init_params(mupd); |
| } |
| |
| __weak void mainboard_memory_init_params(FSPM_UPD *mupd) |
| { |
| printk(BIOS_DEBUG, "WEAK: %s/%s called\n", __FILE__, __func__); |
| } |