| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef CEZANNE_CHIP_H |
| #define CEZANNE_CHIP_H |
| |
| #include <amdblocks/chip.h> |
| #include <soc/i2c.h> |
| #include <drivers/i2c/designware/dw_i2c.h> |
| #include <types.h> |
| |
| struct soc_amd_cezanne_config { |
| struct soc_amd_common_config common_config; |
| u8 i2c_scl_reset; |
| struct dw_i2c_bus_config i2c[I2C_CTRLR_COUNT]; |
| |
| /* Enable S0iX support */ |
| bool s0ix_enable; |
| |
| enum { |
| DOWNCORE_AUTO = 0, |
| DOWNCORE_1 = 1, /* Run with 1 physical core */ |
| DOWNCORE_2 = 3, /* Run with 2 physical cores */ |
| DOWNCORE_3 = 4, /* Run with 3 physical cores */ |
| DOWNCORE_4 = 6, /* Run with 4 physical cores */ |
| DOWNCORE_5 = 8, /* Run with 5 physical cores */ |
| DOWNCORE_6 = 9, /* Run with 6 physical cores */ |
| DOWNCORE_7 = 10, /* Run with 7 physical cores */ |
| } downcore_mode; |
| bool disable_smt; /* disable second thread on all physical cores */ |
| |
| uint8_t stt_control; |
| uint8_t stt_pcb_sensor_count; |
| uint16_t stt_min_limit; |
| uint16_t stt_m1; |
| uint16_t stt_m2; |
| uint16_t stt_m3; |
| uint16_t stt_m4; |
| uint16_t stt_m5; |
| uint16_t stt_m6; |
| uint16_t stt_c_apu; |
| uint16_t stt_c_gpu; |
| uint16_t stt_c_hs2; |
| uint16_t stt_alpha_apu; |
| uint16_t stt_alpha_gpu; |
| uint16_t stt_alpha_hs2; |
| uint16_t stt_skin_temp_apu; |
| uint16_t stt_skin_temp_gpu; |
| uint16_t stt_skin_temp_hs2; |
| uint16_t stt_error_coeff; |
| uint16_t stt_error_rate_coefficient; |
| |
| uint8_t stapm_boost; |
| uint32_t stapm_time_constant; |
| uint32_t apu_only_sppt_limit; |
| uint32_t sustained_power_limit; |
| uint32_t fast_ppt_limit; |
| uint32_t slow_ppt_limit; |
| |
| uint8_t smartshift_enable; |
| |
| uint8_t system_configuration; |
| |
| uint8_t cppc_ctrl; |
| uint8_t cppc_perf_limit_max_range; |
| uint8_t cppc_perf_limit_min_range; |
| uint8_t cppc_epp_max_range; |
| uint8_t cppc_epp_min_range; |
| uint8_t cppc_preferred_cores; |
| }; |
| |
| #endif /* CEZANNE_CHIP_H */ |