blob: 4ae412d15564cafdfa20b1ab4440de3ab3a75425 [file] [log] [blame]
chip soc/intel/cannonlake
register "common_soc_config" = "{
// Touchpad I2C bus
.i2c[0] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 80,
.fall_time_ns = 110,
},
}"
# CPU (soc/intel/cannonlake/cpu.c)
# Power limit
register "power_limits_config" = "{
.tdp_pl1_override = 45,
.tdp_pl2_override = 90,
}"
# Enable Enhanced Intel SpeedStep
register "eist_enable" = "1"
# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
register "enable_c6dram" = "1"
# FSP Silicon (soc/intel/cannonlake/fsp_params.c)
# Misc
register "AcousticNoiseMitigation" = "1"
# Power
register "PchPmSlpS3MinAssert" = "3" # 50ms
register "PchPmSlpS4MinAssert" = "1" # 1s
register "PchPmSlpSusMinAssert" = "4" # 4s
register "PchPmSlpAMinAssert" = "4" # 2s
# Thermal
register "tcc_offset" = "8"
# Serial IRQ Continuous
register "serirq_mode" = "SERIRQ_CONTINUOUS"
# PM Util (soc/intel/cannonlake/pmutil.c)
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "PMC_GPP_K"
register "gpe0_dw1" = "PMC_GPP_G"
register "gpe0_dw2" = "PMC_GPP_E"
# Actual device tree
device cpu_cluster 0 on end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 01.0 on # GPU Port
# PCI Express Graphics #0 x16, Clock 8 (NVIDIA GPU)
register "PcieClkSrcUsage[8]" = "0x40"
register "PcieClkSrcClkReq[8]" = "8"
end
device pci 02.0 on # Integrated Graphics Device
register "gfx" = "GMA_DEFAULT_PANEL(0)"
end
device pci 04.0 on # SA Thermal device
register "Device4Enable" = "1"
end
device pci 12.0 on end # Thermal Subsystem
device pci 12.5 off end # UFS SCS
device pci 12.6 off end # GSPI #2
device pci 13.0 off end # Integrated Sensor Hub
device pci 14.0 on # USB xHCI
register "usb2_ports" = "{
[0] = USB2_PORT_MID(OC_SKIP), /* USB 3 Right */
[1] = USB2_PORT_MID(OC_SKIP), /* USB 3 Left */
[2] = USB2_PORT_TYPE_C(OC_SKIP), /* Type-C */
[5] = USB2_PORT_MID(OC_SKIP), /* USB 2 Left */
[7] = USB2_PORT_MID(OC_SKIP), /* Camera */
[9] = USB2_PORT_MID(OC_SKIP), /* Fingerprint */
[13] = USB2_PORT_MID(OC_SKIP), /* Bluetooth */
}"
register "usb3_ports" = "{
[0] = USB3_PORT_DEFAULT(OC_SKIP), /* USB 3 Right */
[1] = USB3_PORT_DEFAULT(OC_SKIP), /* USB 3 Left */
[2] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-C */
[3] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-C */
}"
end
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Shared SRAM
device pci 14.3 on # CNVi wifi
chip drivers/wifi/generic
register "wake" = "GPE0_PME_B0"
device generic 0 on end
end
end
device pci 14.5 off end # SDCard
device pci 15.1 on end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 16.5 off end # Management Engine Interface 4
device pci 17.0 on # SATA
register "SataPortsEnable" = "{
[1] = 1, /* SSD (SATA1A) */
[4] = 1, /* HDD (SATA4) */
}"
end
device pci 19.0 off end # I2C #4
device pci 19.1 off end # I2C #5
device pci 19.2 on end # UART #2
device pci 1a.0 off end # eMMC
device pci 1b.0 off end # PCI Express Port 17
device pci 1b.1 off end # PCI Express Port 18
device pci 1b.2 off end # PCI Express Port 19
device pci 1b.3 off end # PCI Express Port 20
device pci 1b.4 on # PCI Express Port 21
# PCI Express root port #21 x4, Clock 11 (SSD2)
register "PcieRpEnable[20]" = "1"
register "PcieRpLtrEnable[20]" = "1"
register "PcieClkSrcUsage[11]" = "20"
register "PcieClkSrcClkReq[11]" = "11"
register "PcieRpSlotImplemented[20]" = "1"
end
device pci 1b.5 off end # PCI Express Port 22
device pci 1b.6 off end # PCI Express Port 23
device pci 1b.7 off end # PCI Express Port 24
device pci 1c.0 off end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 on # PCI Express Port 9
# PCI Express root port #9 x4, Clock 10 (SSD)
register "PcieRpEnable[8]" = "1"
register "PcieRpLtrEnable[8]" = "1"
register "PcieClkSrcUsage[10]" = "8"
register "PcieClkSrcClkReq[10]" = "10"
register "PcieRpSlotImplemented[8]" = "1"
end
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1d.4 off end # PCI Express Port 13
device pci 1d.5 on # PCI Express Port 14
# PCI Express root port #14 x1, Clock 6 (WLAN)
register "PcieRpEnable[13]" = "1"
register "PcieRpLtrEnable[13]" = "1"
register "PcieClkSrcUsage[6]" = "13"
register "PcieClkSrcClkReq[6]" = "6"
register "PcieRpSlotImplemented[13]" = "1"
end
device pci 1d.6 on # PCI Express Port 15
# PCI Express root port #15 x1, Clock 5 (LAN)
register "PcieRpEnable[14]" = "1"
register "PcieRpLtrEnable[14]" = "1"
register "PcieClkSrcUsage[5]" = "14"
register "PcieClkSrcClkReq[5]" = "5"
register "PcieRpSlotImplemented[14]" = "1"
end
device pci 1d.7 off end # PCI Express Port 16
device pci 1e.0 off end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1f.0 on # LPC Interface
register "gen1_dec" = "0x00040069"
register "gen2_dec" = "0x00fc0e01"
register "gen3_dec" = "0x00fc0f01"
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
end
device pci 1f.1 off end # P2SB
device pci 1f.2 hidden end # Power Management Controller
device pci 1f.3 on # Intel HDA
register "PchHdaAudioLinkHda" = "1"
register "PchHdaAudioLinkDmic0" = "1"
register "PchHdaAudioLinkDmic1" = "1"
end
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end