| bootblock-y += bootblock.c |
| bootblock-y += bootblock_asm.S |
| bootblock-y += cbfs.c |
| bootblock-y += timer.c |
| bootblock-y += clock.c |
| bootblock-y += spi.c |
| bootblock-y += i2c.c |
| bootblock-y += dma.c |
| bootblock-y += monotonic_timer.c |
| bootblock-y += ../tegra/gpio.c |
| bootblock-y += ../tegra/i2c.c |
| bootblock-y += ../tegra/pingroup.c |
| bootblock-y += ../tegra/pinmux.c |
| bootblock-y += ../tegra/apbmisc.c |
| ifeq ($(CONFIG_BOOTBLOCK_CONSOLE),y) |
| bootblock-$(CONFIG_DRIVERS_UART) += uart.c |
| endif |
| |
| romstage-y += romstage_asm.S |
| romstage-y += addressmap.c |
| romstage-y += cbfs.c |
| romstage-y += cbmem.c |
| romstage-y += timer.c |
| romstage-y += ccplex.c |
| romstage-y += clock.c |
| romstage-y += spi.c |
| romstage-y += i2c.c |
| romstage-y += dma.c |
| romstage-y += monotonic_timer.c |
| romstage-y += romstage.c |
| romstage-y += power.c |
| romstage-y += sdram.c |
| romstage-y += sdram_lp0.c |
| romstage-y += ../tegra/gpio.c |
| romstage-y += ../tegra/i2c.c |
| romstage-y += ../tegra/pinmux.c |
| romstage-$(CONFIG_DRIVERS_UART) += uart.c |
| |
| ramstage-y += addressmap.c |
| ramstage-y += cbfs.c |
| ramstage-y += cbmem.c |
| ramstage-y += timer.c |
| ramstage-y += clock.c |
| ramstage-y += spi.c |
| ramstage-y += i2c.c |
| ramstage-y += dma.c |
| ramstage-y += monotonic_timer.c |
| ramstage-y += ../tegra/gpio.c |
| ramstage-y += ../tegra/i2c.c |
| ramstage-y += ../tegra/pinmux.c |
| ramstage-$(CONFIG_DRIVERS_UART) += uart.c |
| |
| CPPFLAGS_common += -Isrc/soc/nvidia/tegra132/include/ |
| CBOOTIMAGE_OPTS = --soc tegra132 |
| |
| # We want to grab the bootblock right before it goes into the image and wrap |
| # it inside a BCT, but ideally we would do that without making special, one |
| # use modifications to the main ARM Makefile. We do this in two ways. First, |
| # we copy bootblock.elf to bootblock.raw.elf and allow the %.bin: %.elf |
| # template rule to turn it into bootblock.raw.bin. This makes sure whatever |
| # processing is supposed to happen to turn an .elf into a .bin happens. |
| # |
| # Second, we add our own rule for creating bootblock.bin from |
| # bootblock.raw.bin which displaces the template rule. When other rules that |
| # package up the image pull in bootblock.bin, it will be this wrapped version |
| # instead of the raw bootblock. |
| |
| $(objcbfs)/bootblock.raw.elf: $(objcbfs)/bootblock.elf |
| cp $< $@ |
| |
| $(obj)/generated/bct.bin: $(obj)/generated/bct.cfg $(CBOOTIMAGE) |
| @printf " CBOOTIMAGE $(subst $(obj)/,,$(@))\n" |
| $(CBOOTIMAGE) -gbct $(CBOOTIMAGE_OPTS) $< $@ |
| |
| BCT_BIN = $(obj)/generated/bct.bin |
| BCT_WRAPPER = $(obj)/generated/bct.wrapper |
| MTS_DIR = $(CONFIG_MTS_DIRECTORY) |
| PREBOOT_MTS_FILE = $(MTS_DIR)/preboot_cr.bin |
| $(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin $(BCT_BIN) $(CBOOTIMAGE) |
| echo "Version = 1;" > $(BCT_WRAPPER) |
| echo "Redundancy = 1;" >> $(BCT_WRAPPER) |
| echo "Bctcopy = 1;" >> $(BCT_WRAPPER) |
| echo "Bctfile = $(BCT_BIN);" >> $(BCT_WRAPPER) |
| echo "MtsPreboot = $(PREBOOT_MTS_FILE),0x4000f000,0x4000f000,Complete;" >> $(BCT_WRAPPER) |
| echo "BootLoader = $<,$(CONFIG_BOOTBLOCK_BASE),$(CONFIG_BOOTBLOCK_BASE),Complete;" >> $(BCT_WRAPPER) |
| @printf " CBOOTIMAGE $(subst $(obj)/,,$(@))\n" |
| $(CBOOTIMAGE) $(CBOOTIMAGE_OPTS) $(BCT_WRAPPER) $@ |
| |
| # MTS microcode |
| MTS_FILE = $(MTS_DIR)/mts_cr.bin |
| MTS_FILE_CBFS = mts |
| cbfs-files-y += $(MTS_FILE_CBFS) |
| $(MTS_FILE_CBFS)-file := $(MTS_FILE) |
| $(MTS_FILE_CBFS)-type := 0x50 |