| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright 2017 Google Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <arch/acpi.h> |
| #include <arch/acpi_device.h> |
| #include <arch/acpigen.h> |
| #include <console/console.h> |
| #include <device/i2c.h> |
| #include <device/device.h> |
| #include <device/path.h> |
| #include <stdint.h> |
| #include <string.h> |
| #include "chip.h" |
| |
| #define RT5663_ACPI_NAME "RT53" |
| #define RT5663_ACPI_HID "10EC5663" |
| |
| #define RT5663_DP_INT(key, val) \ |
| acpi_dp_add_integer(dp, "realtek," key, (val)) |
| |
| static void rt5663_fill_ssdt(struct device *dev) |
| { |
| struct drivers_i2c_rt5663_config *config = dev->chip_info; |
| const char *scope = acpi_device_scope(dev); |
| struct acpi_i2c i2c = { |
| .address = dev->path.i2c.device, |
| .mode_10bit = dev->path.i2c.mode_10bit, |
| .speed = config->bus_speed ? : I2C_SPEED_FAST, |
| .resource = scope, |
| }; |
| struct acpi_dp *dp; |
| |
| if (!dev->enabled || !scope) |
| return; |
| |
| /* Device */ |
| acpigen_write_scope(scope); |
| acpigen_write_device(acpi_device_name(dev)); |
| acpigen_write_name_string("_HID", RT5663_ACPI_HID); |
| acpigen_write_name_integer("_UID", config->uid); |
| acpigen_write_name_string("_DDN", dev->chip_ops->name); |
| acpigen_write_STA(ACPI_STATUS_DEVICE_ALL_ON); |
| |
| /* Resources */ |
| acpigen_write_name("_CRS"); |
| acpigen_write_resourcetemplate_header(); |
| acpi_device_write_i2c(&i2c); |
| /* Allow either GpioInt() or Interrupt() */ |
| if (config->irq_gpio.pin_count) |
| acpi_device_write_gpio(&config->irq_gpio); |
| else |
| acpi_device_write_interrupt(&config->irq); |
| acpigen_write_resourcetemplate_footer(); |
| |
| /* Device Properties */ |
| dp = acpi_dp_new_table("_DSD"); |
| if (config->irq_gpio.pin_count) |
| acpi_dp_add_gpio(dp, "irq-gpios", acpi_device_path(dev), 0, 0, |
| config->irq_gpio.polarity == ACPI_GPIO_ACTIVE_LOW); |
| RT5663_DP_INT("dc_offset_l_manual", config->dc_offset_l_manual); |
| RT5663_DP_INT("dc_offset_r_manual", config->dc_offset_r_manual); |
| RT5663_DP_INT("dc_offset_l_manual_mic", config->dc_offset_l_manual_mic); |
| RT5663_DP_INT("dc_offset_r_manual_mic", config->dc_offset_r_manual_mic); |
| acpi_dp_write(dp); |
| |
| acpigen_pop_len(); /* Device */ |
| acpigen_pop_len(); /* Scope */ |
| |
| printk(BIOS_INFO, "%s: %s address 0%xh\n", acpi_device_path(dev), |
| dev->chip_ops->name, dev->path.i2c.device); |
| } |
| |
| static const char *rt5663_acpi_name(struct device *dev) |
| { |
| return RT5663_ACPI_NAME; |
| } |
| |
| static struct device_operations rt5663_ops = { |
| .read_resources = DEVICE_NOOP, |
| .set_resources = DEVICE_NOOP, |
| .enable_resources = DEVICE_NOOP, |
| .acpi_name = &rt5663_acpi_name, |
| .acpi_fill_ssdt_generator = &rt5663_fill_ssdt, |
| }; |
| |
| static void rt5663_enable(struct device *dev) |
| { |
| dev->ops = &rt5663_ops; |
| } |
| |
| struct chip_operations drivers_i2c_rt5663_ops = { |
| CHIP_NAME("Realtek RT5663 Codec") |
| .enable_dev = &rt5663_enable |
| }; |