| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 Advanced Micro Devices, Inc. |
| * Copyright (C) 2014 Sage Electronic Engineering, LLC |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <arch/io.h> |
| #include <arch/acpi.h> |
| #include <northbridge/amd/agesa/BiosCallOuts.h> |
| #include <cpu/amd/agesa/s3_resume.h> |
| #include <northbridge/amd/agesa/agesawrapper.h> |
| #include <southbridge/amd/amd_pci_util.h> |
| #include <southbridge/amd/agesa/hudson/pci_devs.h> |
| #include <northbridge/amd/agesa/family16kb/pci_devs.h> |
| |
| void set_pcie_reset(void); |
| void set_pcie_dereset(void); |
| |
| /*********************************************************** |
| * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. |
| * This table is responsible for physically routing the PIC and |
| * IOAPIC IRQs to the different PCI devices on the system. It |
| * is read and written via registers 0xC00/0xC01 as an |
| * Index/Data pair. These values are chipset and mainboard |
| * dependent and should be updated accordingly. |
| * |
| * These values are used by the PCI configuration space, |
| * MP Tables. TODO: Make ACPI use these values too. |
| */ |
| static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { |
| [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, /* INTA# - INTH# */ |
| [0x08] = 0x00,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ |
| [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,0x0A, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon, SD */ |
| [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */ |
| [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, /* USB Devs 18/19/20/22 INTA-C */ |
| [0x40] = 0x0B,0x0B, /* IDE, SATA */ |
| }; |
| |
| static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { |
| [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ |
| [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ |
| [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x10, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */ |
| [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */ |
| [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, /* USB Devs 18/19/22/20 INTA-C */ |
| [0x40] = 0x11,0x13, /* IDE, SATA */ |
| }; |
| |
| /* |
| * This table defines the index into the picr/intr_data |
| * tables for each device. Any enabled device and slot |
| * that uses hardware interrupts should have an entry |
| * in this table to define its index into the FCH |
| * PCI_INTR register 0xC00/0xC01. This index will define |
| * the interrupt that it should use. Putting PIRQ_A into |
| * the PIN A index for a device will tell that device to |
| * use PIC IRQ 10 if it uses PIN A for its hardware INT. |
| */ |
| static const struct pirq_struct mainboard_pirq_data[] = { |
| /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ |
| {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ |
| {NB_PCIE_PORT2_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.2 */ |
| {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.3 */ |
| {NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.4 */ |
| {NB_PCIE_PORT5_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.5 */ |
| {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ |
| {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ |
| {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ |
| {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */ |
| {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */ |
| {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */ |
| {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ |
| {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCIB: 14.4 */ |
| {SD_DEVFN, {PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SD: 14.7 */ |
| {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */ |
| {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */ |
| }; |
| |
| /* PIRQ Setup */ |
| static void pirq_setup(void) |
| { |
| pirq_data_ptr = mainboard_pirq_data; |
| pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct); |
| intr_data_ptr = mainboard_intr_data; |
| picr_data_ptr = mainboard_picr_data; |
| } |
| |
| /* TODO: mainboard specific SB AGESA callback */ |
| void set_pcie_reset(void) |
| { |
| } |
| |
| /* TODO: mainboard specific SB AGESA callback */ |
| void set_pcie_dereset(void) |
| { |
| } |
| |
| /********************************************** |
| * Enable the dedicated functions of the board. |
| **********************************************/ |
| static void mainboard_enable(device_t dev) |
| { |
| printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); |
| |
| if (acpi_is_wakeup_s3()) |
| agesawrapper_fchs3earlyrestore(); |
| |
| /* Initialize the PIRQ data structures for consumption */ |
| pirq_setup(); |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .enable_dev = mainboard_enable, |
| }; |