| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 secunet Security Networks AG |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <arch/cpu.h> |
| #include <arch/io.h> |
| #include <device/pci_def.h> |
| #include <device/pnp_def.h> |
| #include <device/device.h> |
| #include <spd.h> |
| #include <console/console.h> |
| #include <lib.h> |
| #include <delay.h> |
| #include <timestamp.h> |
| #include "gm45.h" |
| #include "chip.h" |
| |
| static const gmch_gfx_t gmch_gfx_types[][5] = { |
| /* MAX_667MHz MAX_533MHz MAX_400MHz MAX_333MHz MAX_800MHz */ |
| { GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_UNKNOWN }, |
| { GMCH_GM47, GMCH_GM45, GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_GM49 }, |
| { GMCH_GE45, GMCH_GE45, GMCH_GE45, GMCH_GE45, GMCH_GE45 }, |
| { GMCH_UNKNOWN, GMCH_GL43, GMCH_GL40, GMCH_UNKNOWN, GMCH_UNKNOWN }, |
| { GMCH_UNKNOWN, GMCH_GS45, GMCH_GS40, GMCH_UNKNOWN, GMCH_UNKNOWN }, |
| { GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_UNKNOWN }, |
| { GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_UNKNOWN, GMCH_UNKNOWN }, |
| { GMCH_PM45, GMCH_PM45, GMCH_PM45, GMCH_PM45, GMCH_PM45 }, |
| }; |
| |
| void get_gmch_info(sysinfo_t *sysinfo) |
| { |
| sysinfo->stepping = pci_read_config8(PCI_DEV(0, 0, 0), PCI_CLASS_REVISION); |
| if ((sysinfo->stepping > STEPPING_B3) && |
| (sysinfo->stepping != STEPPING_CONVERSION_A1)) |
| die("Unknown stepping.\n"); |
| if (sysinfo->stepping <= STEPPING_B3) |
| printk(BIOS_DEBUG, "Stepping %c%d\n", 'A' + sysinfo->stepping / 4, sysinfo->stepping % 4); |
| else |
| printk(BIOS_DEBUG, "Conversion stepping A1\n"); |
| |
| const u32 eax = cpuid_ext(0x04, 0).eax; |
| sysinfo->cores = ((eax >> 26) & 0x3f) + 1; |
| printk(BIOS_SPEW, "%d CPU cores\n", sysinfo->cores); |
| |
| u32 capid = pci_read_config16(PCI_DEV(0, 0, 0), D0F0_CAPID0+8); |
| if (!(capid & (1<<(79-64)))) { |
| printk(BIOS_SPEW, "iTPM enabled\n"); |
| } |
| |
| capid = pci_read_config32(PCI_DEV(0, 0, 0), D0F0_CAPID0+4); |
| if (!(capid & (1<<(57-32)))) { |
| printk(BIOS_SPEW, "ME enabled\n"); |
| } |
| |
| if (!(capid & (1<<(56-32)))) { |
| printk(BIOS_SPEW, "AMT enabled\n"); |
| } |
| |
| sysinfo->max_ddr2_mhz = (capid & (1<<(53-32)))?667:800; |
| printk(BIOS_SPEW, "capable of DDR2 of %d MHz or lower\n", sysinfo->max_ddr2_mhz); |
| |
| if (!(capid & (1<<(48-32)))) { |
| printk(BIOS_SPEW, "VT-d enabled\n"); |
| } |
| |
| const u32 gfx_variant = (capid>>(42-32)) & 0x7; |
| const u32 render_freq = ((capid>>(50-32) & 0x1) << 2) | ((capid>>(35-32)) & 0x3); |
| if (render_freq <= 4) |
| sysinfo->gfx_type = gmch_gfx_types[gfx_variant][render_freq]; |
| else |
| sysinfo->gfx_type = GMCH_UNKNOWN; |
| switch (sysinfo->gfx_type) { |
| case GMCH_GM45: |
| printk(BIOS_SPEW, "GMCH: GM45\n"); |
| break; |
| case GMCH_GM47: |
| printk(BIOS_SPEW, "GMCH: GM47\n"); |
| break; |
| case GMCH_GM49: |
| printk(BIOS_SPEW, "GMCH: GM49\n"); |
| break; |
| case GMCH_GE45: |
| printk(BIOS_SPEW, "GMCH: GE45\n"); |
| break; |
| case GMCH_GL40: |
| printk(BIOS_SPEW, "GMCH: GL40\n"); |
| break; |
| case GMCH_GL43: |
| printk(BIOS_SPEW, "GMCH: GL43\n"); |
| break; |
| case GMCH_GS40: |
| printk(BIOS_SPEW, "GMCH: GS40\n"); |
| break; |
| case GMCH_GS45: |
| printk(BIOS_SPEW, "GMCH: GS45, using %s-power mode\n", |
| sysinfo->gs45_low_power_mode ? "low" : "high"); |
| break; |
| case GMCH_PM45: |
| printk(BIOS_SPEW, "GMCH: PM45\n"); |
| break; |
| case GMCH_UNKNOWN: |
| printk(BIOS_SPEW, "unknown GMCH\n"); |
| break; |
| } |
| |
| sysinfo->txt_enabled = !(capid & (1 << (37-32))); |
| if (sysinfo->txt_enabled) { |
| printk(BIOS_SPEW, "TXT enabled\n"); |
| } |
| |
| switch (render_freq) { |
| case 4: |
| sysinfo->max_render_mhz = 800; |
| break; |
| case 0: |
| sysinfo->max_render_mhz = 667; |
| break; |
| case 1: |
| sysinfo->max_render_mhz = 533; |
| break; |
| case 2: |
| sysinfo->max_render_mhz = 400; |
| break; |
| case 3: |
| sysinfo->max_render_mhz = 333; |
| break; |
| default: |
| printk(BIOS_SPEW, "Unknown render frequency\n"); |
| sysinfo->max_render_mhz = 0; |
| break; |
| } |
| if (sysinfo->max_render_mhz != 0) { |
| printk(BIOS_SPEW, "Render frequency: %d MHz\n", sysinfo->max_render_mhz); |
| } |
| |
| if (!(capid & (1<<(33-32)))) { |
| printk(BIOS_SPEW, "IGD enabled\n"); |
| } |
| |
| if (!(capid & (1<<(32-32)))) { |
| printk(BIOS_SPEW, "PCIe-to-GMCH enabled\n"); |
| } |
| |
| capid = pci_read_config32(PCI_DEV(0, 0, 0), D0F0_CAPID0); |
| |
| u32 ddr_cap = capid>>30 & 0x3; |
| switch (ddr_cap) { |
| case 0: |
| sysinfo->max_ddr3_mt = 1067; |
| break; |
| case 1: |
| sysinfo->max_ddr3_mt = 800; |
| break; |
| case 2: |
| case 3: |
| printk(BIOS_SPEW, "GMCH not DDR3 capable\n"); |
| sysinfo->max_ddr3_mt = 0; |
| break; |
| } |
| if (sysinfo->max_ddr3_mt != 0) { |
| printk(BIOS_SPEW, "GMCH supports DDR3 with %d MT or less\n", sysinfo->max_ddr3_mt); |
| } |
| |
| const unsigned max_fsb = (capid >> 28) & 0x3; |
| switch (max_fsb) { |
| case 1: |
| sysinfo->max_fsb_mhz = 1067; |
| break; |
| case 2: |
| sysinfo->max_fsb_mhz = 800; |
| break; |
| case 3: |
| sysinfo->max_fsb_mhz = 667; |
| break; |
| default: |
| die("unknown FSB capability\n"); |
| break; |
| } |
| if (sysinfo->max_fsb_mhz != 0) { |
| printk(BIOS_SPEW, "GMCH supports FSB with up to %d MHz\n", sysinfo->max_fsb_mhz); |
| } |
| sysinfo->max_fsb = max_fsb - 1; |
| } |
| |
| /* |
| * Detect if the system went through an interrupted RAM init or is incon- |
| * sistent. If so, initiate a cold reboot. Otherwise mark the system to be |
| * in RAM init, so this function would detect it on an erroneous reboot. |
| */ |
| void enter_raminit_or_reset(void) |
| { |
| /* Interrupted RAM init or inconsistent system? */ |
| u8 reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); |
| |
| if (reg8 & (1 << 2)) { /* S4-assertion-width violation */ |
| /* Ignore S4-assertion-width violation like original BIOS. */ |
| printk(BIOS_WARNING, |
| "WARNING: Ignoring S4-assertion-width violation.\n"); |
| /* Bit2 is R/WC, so it will clear itself below. */ |
| } |
| |
| if (reg8 & (1 << 7)) { /* interrupted RAM init */ |
| /* Don't enable S4-assertion stretch. Makes trouble on roda/rk9. |
| reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8 | 0x08); |
| */ |
| |
| /* Clear bit7. */ |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8 & ~(1 << 7)); |
| |
| printk(BIOS_INFO, "Interrupted RAM init, reset required.\n"); |
| gm45_early_reset(); |
| } |
| /* Mark system to be in RAM init. */ |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8 | (1 << 7)); |
| } |
| |
| |
| /* For a detected DIMM, test the value of an SPD byte to |
| match the expected value after masking some bits. */ |
| static int test_dimm(sysinfo_t *const sysinfo, |
| int dimm, int addr, int bitmask, int expected) |
| { |
| return (smbus_read_byte(sysinfo->spd_map[dimm], addr) & bitmask) == expected; |
| } |
| |
| /* This function dies if dimm is unsuitable for the chipset. */ |
| static void verify_ddr3_dimm(sysinfo_t *const sysinfo, int dimm) |
| { |
| if (!test_dimm(sysinfo, dimm, 3, 15, 3)) |
| die("Chipset only supports SO-DIMM\n"); |
| |
| if (!test_dimm(sysinfo, dimm, 8, 0x18, 0)) |
| die("Chipset doesn't support ECC RAM\n"); |
| |
| if (!test_dimm(sysinfo, dimm, 7, 0x38, 0) && |
| !test_dimm(sysinfo, dimm, 7, 0x38, 8)) |
| die("Chipset wants single or double sided DIMMs\n"); |
| |
| if (!test_dimm(sysinfo, dimm, 7, 7, 1) && |
| !test_dimm(sysinfo, dimm, 7, 7, 2)) |
| die("Chipset requires x8 or x16 width\n"); |
| |
| if (!test_dimm(sysinfo, dimm, 4, 0x0f, 0) && |
| !test_dimm(sysinfo, dimm, 4, 0x0f, 1) && |
| !test_dimm(sysinfo, dimm, 4, 0x0f, 2) && |
| !test_dimm(sysinfo, dimm, 4, 0x0f, 3)) |
| die("Chipset requires 256Mb, 512Mb, 1Gb or 2Gb chips."); |
| |
| if (!test_dimm(sysinfo, dimm, 4, 0x70, 0)) |
| die("Chipset requires 8 banks on DDR3\n"); |
| |
| /* How to check if burst length is 8? |
| Other values are not supported, are they even possible? */ |
| |
| if (!test_dimm(sysinfo, dimm, 10, 0xff, 1)) |
| die("Code assumes 1/8ns MTB\n"); |
| |
| if (!test_dimm(sysinfo, dimm, 11, 0xff, 8)) |
| die("Code assumes 1/8ns MTB\n"); |
| |
| if (!test_dimm(sysinfo, dimm, 62, 0x9f, 0) && |
| !test_dimm(sysinfo, dimm, 62, 0x9f, 1) && |
| !test_dimm(sysinfo, dimm, 62, 0x9f, 2) && |
| !test_dimm(sysinfo, dimm, 62, 0x9f, 3) && |
| !test_dimm(sysinfo, dimm, 62, 0x9f, 5)) |
| die("Only raw card types A, B, C, D and F are supported.\n"); |
| } |
| |
| /* For every detected DIMM, test if it's suitable for the chipset. */ |
| static void verify_ddr3(sysinfo_t *const sysinfo, int mask) |
| { |
| int cur = 0; |
| while (mask) { |
| if (mask & 1) { |
| verify_ddr3_dimm(sysinfo, cur); |
| } |
| mask >>= 1; |
| cur++; |
| } |
| } |
| |
| |
| typedef struct { |
| int dimm_mask; |
| struct { |
| unsigned int rows; |
| unsigned int cols; |
| unsigned int chip_capacity; |
| unsigned int banks; |
| unsigned int ranks; |
| unsigned int cas_latencies; |
| unsigned int tAAmin; |
| unsigned int tCKmin; |
| unsigned int width; |
| unsigned int tRAS; |
| unsigned int tRP; |
| unsigned int tRCD; |
| unsigned int tWR; |
| unsigned int page_size; |
| unsigned int raw_card; |
| } channel[2]; |
| } spdinfo_t; |
| /* |
| * This function collects RAM characteristics from SPD, assuming that RAM |
| * is generally within chipset's requirements, since verify_ddr3() passed. |
| */ |
| static void collect_ddr3(sysinfo_t *const sysinfo, spdinfo_t *const config) |
| { |
| int mask = config->dimm_mask; |
| int cur = 0; |
| while (mask != 0) { |
| /* FIXME: support several dimms on same channel. */ |
| if ((mask & 1) && sysinfo->spd_map[2 * cur]) { |
| int tmp; |
| const int smb_addr = sysinfo->spd_map[2 * cur]; |
| |
| config->channel[cur].rows = ((smbus_read_byte(smb_addr, 5) >> 3) & 7) + 12; |
| config->channel[cur].cols = (smbus_read_byte(smb_addr, 5) & 7) + 9; |
| |
| config->channel[cur].chip_capacity = smbus_read_byte(smb_addr, 4) & 0xf; |
| |
| config->channel[cur].banks = 8; /* GM45 only accepts this for DDR3. |
| verify_ddr3() fails for other values. */ |
| config->channel[cur].ranks = ((smbus_read_byte(smb_addr, 7) >> 3) & 7) + 1; |
| |
| config->channel[cur].cas_latencies = |
| ((smbus_read_byte(smb_addr, 15) << 8) | smbus_read_byte(smb_addr, 14)) |
| << 4; /* so bit x is CAS x */ |
| config->channel[cur].tAAmin = smbus_read_byte(smb_addr, 16); /* in MTB */ |
| config->channel[cur].tCKmin = smbus_read_byte(smb_addr, 12); /* in MTB */ |
| |
| config->channel[cur].width = smbus_read_byte(smb_addr, 7) & 7; |
| config->channel[cur].page_size = config->channel[cur].width * |
| (1 << config->channel[cur].cols); /* in Bytes */ |
| |
| tmp = smbus_read_byte(smb_addr, 21); |
| config->channel[cur].tRAS = smbus_read_byte(smb_addr, 22) | ((tmp & 0xf) << 8); |
| config->channel[cur].tRP = smbus_read_byte(smb_addr, 20); |
| config->channel[cur].tRCD = smbus_read_byte(smb_addr, 18); |
| config->channel[cur].tWR = smbus_read_byte(smb_addr, 17); |
| |
| config->channel[cur].raw_card = smbus_read_byte(smb_addr, 62) & 0x1f; |
| } |
| cur++; |
| mask >>= 2; |
| } |
| } |
| |
| #define ROUNDUP_DIV(val, by) CEIL_DIV(val, by) |
| #define ROUNDUP_DIV_THIS(val, by) val = ROUNDUP_DIV(val, by) |
| static fsb_clock_t read_fsb_clock(void) |
| { |
| switch (MCHBAR32(CLKCFG_MCHBAR) & CLKCFG_FSBCLK_MASK) { |
| case 6: |
| return FSB_CLOCK_1067MHz; |
| case 2: |
| return FSB_CLOCK_800MHz; |
| case 3: |
| return FSB_CLOCK_667MHz; |
| default: |
| die("Unsupported FSB clock.\n"); |
| } |
| } |
| static mem_clock_t clock_index(const unsigned int clock) |
| { |
| switch (clock) { |
| case 533: return MEM_CLOCK_533MHz; |
| case 400: return MEM_CLOCK_400MHz; |
| case 333: return MEM_CLOCK_333MHz; |
| default: die("Unknown clock value.\n"); |
| } |
| return -1; /* Won't be reached. */ |
| } |
| static void normalize_clock(unsigned int *const clock) |
| { |
| if (*clock >= 533) |
| *clock = 533; |
| else if (*clock >= 400) |
| *clock = 400; |
| else if (*clock >= 333) |
| *clock = 333; |
| else |
| *clock = 0; |
| } |
| static void lower_clock(unsigned int *const clock) |
| { |
| --*clock; |
| normalize_clock(clock); |
| } |
| static unsigned int find_common_clock_cas(sysinfo_t *const sysinfo, |
| const spdinfo_t *const spdinfo) |
| { |
| /* various constraints must be fulfilled: |
| CAS * tCK < 20ns == 160MTB |
| tCK_max >= tCK >= tCK_min |
| CAS >= roundup(tAA_min/tCK) |
| CAS supported |
| Clock(MHz) = 1000 / tCK(ns) |
| Clock(MHz) = 8000 / tCK(MTB) |
| AND BTW: Clock(MT) = 2000 / tCK(ns) - intel uses MTs but calls them MHz |
| */ |
| int i; |
| |
| /* Calculate common cas_latencies mask, tCKmin and tAAmin. */ |
| unsigned int cas_latencies = (unsigned int)-1; |
| unsigned int tCKmin = 0, tAAmin = 0; |
| FOR_EACH_POPULATED_CHANNEL(sysinfo->dimms, i) { |
| cas_latencies &= spdinfo->channel[i].cas_latencies; |
| if (spdinfo->channel[i].tCKmin > tCKmin) |
| tCKmin = spdinfo->channel[i].tCKmin; |
| if (spdinfo->channel[i].tAAmin > tAAmin) |
| tAAmin = spdinfo->channel[i].tAAmin; |
| } |
| |
| /* Get actual value of fsb clock. */ |
| sysinfo->selected_timings.fsb_clock = read_fsb_clock(); |
| unsigned int fsb_mhz = 0; |
| switch (sysinfo->selected_timings.fsb_clock) { |
| case FSB_CLOCK_1067MHz: fsb_mhz = 1067; break; |
| case FSB_CLOCK_800MHz: fsb_mhz = 800; break; |
| case FSB_CLOCK_667MHz: fsb_mhz = 667; break; |
| } |
| |
| unsigned int clock = 8000 / tCKmin; |
| if ((clock > sysinfo->max_ddr3_mt / 2) || (clock > fsb_mhz / 2)) { |
| int new_clock = min(sysinfo->max_ddr3_mt / 2, fsb_mhz / 2); |
| printk(BIOS_SPEW, "DIMMs support %d MHz, but chipset only runs at up to %d. Limiting...\n", |
| clock, new_clock); |
| clock = new_clock; |
| } |
| normalize_clock(&clock); |
| |
| /* Find compatible clock / CAS pair. */ |
| unsigned int tCKproposed; |
| unsigned int CAS; |
| while (1) { |
| if (!clock) |
| die("Couldn't find compatible clock / CAS settings.\n"); |
| tCKproposed = 8000 / clock; |
| CAS = ROUNDUP_DIV(tAAmin, tCKproposed); |
| printk(BIOS_SPEW, "Trying CAS %u, tCK %u.\n", CAS, tCKproposed); |
| for (; CAS <= DDR3_MAX_CAS; ++CAS) |
| if (cas_latencies & (1 << CAS)) |
| break; |
| if ((CAS <= DDR3_MAX_CAS) && (CAS * tCKproposed < 160)) { |
| /* Found good CAS. */ |
| printk(BIOS_SPEW, "Found compatible clock / CAS pair: %u / %u.\n", clock, CAS); |
| break; |
| } |
| lower_clock(&clock); |
| } |
| sysinfo->selected_timings.CAS = CAS; |
| sysinfo->selected_timings.mem_clock = clock_index(clock); |
| |
| return tCKproposed; |
| } |
| |
| static void calculate_derived_timings(sysinfo_t *const sysinfo, |
| const unsigned int tCLK, |
| const spdinfo_t *const spdinfo) |
| { |
| int i; |
| |
| /* Calculate common tRASmin, tRPmin, tRCDmin and tWRmin. */ |
| unsigned int tRASmin = 0, tRPmin = 0, tRCDmin = 0, tWRmin = 0; |
| FOR_EACH_POPULATED_CHANNEL(sysinfo->dimms, i) { |
| if (spdinfo->channel[i].tRAS > tRASmin) |
| tRASmin = spdinfo->channel[i].tRAS; |
| if (spdinfo->channel[i].tRP > tRPmin) |
| tRPmin = spdinfo->channel[i].tRP; |
| if (spdinfo->channel[i].tRCD > tRCDmin) |
| tRCDmin = spdinfo->channel[i].tRCD; |
| if (spdinfo->channel[i].tWR > tWRmin) |
| tWRmin = spdinfo->channel[i].tWR; |
| } |
| ROUNDUP_DIV_THIS(tRASmin, tCLK); |
| ROUNDUP_DIV_THIS(tRPmin, tCLK); |
| ROUNDUP_DIV_THIS(tRCDmin, tCLK); |
| ROUNDUP_DIV_THIS(tWRmin, tCLK); |
| |
| /* Lookup tRFC and calculate common tRFCmin. */ |
| const unsigned int tRFC_from_clock_and_cap[][4] = { |
| /* CAP_256M CAP_512M CAP_1G CAP_2G */ |
| /* 533MHz */ { 40, 56, 68, 104 }, |
| /* 400MHz */ { 30, 42, 51, 78 }, |
| /* 333MHz */ { 25, 35, 43, 65 }, |
| }; |
| unsigned int tRFCmin = 0; |
| FOR_EACH_POPULATED_CHANNEL(sysinfo->dimms, i) { |
| const unsigned int tRFC = tRFC_from_clock_and_cap |
| [sysinfo->selected_timings.mem_clock][spdinfo->channel[i].chip_capacity]; |
| if (tRFC > tRFCmin) |
| tRFCmin = tRFC; |
| } |
| |
| /* Calculate common tRD from CAS and FSB and DRAM clocks. */ |
| unsigned int tRDmin = sysinfo->selected_timings.CAS; |
| switch (sysinfo->selected_timings.fsb_clock) { |
| case FSB_CLOCK_667MHz: |
| tRDmin += 1; |
| break; |
| case FSB_CLOCK_800MHz: |
| tRDmin += 2; |
| break; |
| case FSB_CLOCK_1067MHz: |
| tRDmin += 3; |
| if (sysinfo->selected_timings.mem_clock == MEM_CLOCK_1067MT) |
| tRDmin += 1; |
| break; |
| } |
| |
| /* Calculate common tRRDmin. */ |
| unsigned int tRRDmin = 0; |
| FOR_EACH_POPULATED_CHANNEL(sysinfo->dimms, i) { |
| unsigned int tRRD = 2 + (spdinfo->channel[i].page_size / 1024); |
| if (sysinfo->selected_timings.mem_clock == MEM_CLOCK_1067MT) |
| tRRD += (spdinfo->channel[i].page_size / 1024); |
| if (tRRD > tRRDmin) |
| tRRDmin = tRRD; |
| } |
| |
| /* Lookup and calculate common tFAWmin. */ |
| unsigned int tFAW_from_pagesize_and_clock[][3] = { |
| /* 533MHz 400MHz 333MHz */ |
| /* 1K */ { 20, 15, 13 }, |
| /* 2K */ { 27, 20, 17 }, |
| }; |
| unsigned int tFAWmin = 0; |
| FOR_EACH_POPULATED_CHANNEL(sysinfo->dimms, i) { |
| const unsigned int tFAW = tFAW_from_pagesize_and_clock |
| [spdinfo->channel[i].page_size / 1024 - 1] |
| [sysinfo->selected_timings.mem_clock]; |
| if (tFAW > tFAWmin) |
| tFAWmin = tFAW; |
| } |
| |
| /* Refresh rate is fixed. */ |
| unsigned int tWL; |
| if (sysinfo->selected_timings.mem_clock == MEM_CLOCK_1067MT) { |
| tWL = 6; |
| } else { |
| tWL = 5; |
| } |
| |
| printk(BIOS_SPEW, "Timing values:\n" |
| " tCLK: %3u\n" |
| " tRAS: %3u\n" |
| " tRP: %3u\n" |
| " tRCD: %3u\n" |
| " tRFC: %3u\n" |
| " tWR: %3u\n" |
| " tRD: %3u\n" |
| " tRRD: %3u\n" |
| " tFAW: %3u\n" |
| " tWL: %3u\n", |
| tCLK, tRASmin, tRPmin, tRCDmin, tRFCmin, tWRmin, tRDmin, tRRDmin, tFAWmin, tWL); |
| |
| sysinfo->selected_timings.tRAS = tRASmin; |
| sysinfo->selected_timings.tRP = tRPmin; |
| sysinfo->selected_timings.tRCD = tRCDmin; |
| sysinfo->selected_timings.tRFC = tRFCmin; |
| sysinfo->selected_timings.tWR = tWRmin; |
| sysinfo->selected_timings.tRD = tRDmin; |
| sysinfo->selected_timings.tRRD = tRRDmin; |
| sysinfo->selected_timings.tFAW = tFAWmin; |
| sysinfo->selected_timings.tWL = tWL; |
| } |
| |
| static void collect_dimm_config(sysinfo_t *const sysinfo) |
| { |
| int i; |
| spdinfo_t spdinfo; |
| |
| spdinfo.dimm_mask = 0; |
| sysinfo->spd_type = 0; |
| |
| for (i = 0; i < 4; i++) |
| if (sysinfo->spd_map[i]) { |
| const u8 spd = smbus_read_byte(sysinfo->spd_map[i], 2); |
| printk (BIOS_DEBUG, "%x:%x:%x\n", |
| i, sysinfo->spd_map[i], |
| spd); |
| if ((spd == 7) || (spd == 8) || (spd == 0xb)) { |
| spdinfo.dimm_mask |= 1 << i; |
| if (sysinfo->spd_type && sysinfo->spd_type != spd) { |
| die("Multiple types of DIMM installed in the system, don't do that!\n"); |
| } |
| sysinfo->spd_type = spd; |
| } |
| } |
| if (spdinfo.dimm_mask == 0) { |
| die("Could not find any DIMM.\n"); |
| } |
| |
| /* Normalize spd_type to 1, 2, 3. */ |
| sysinfo->spd_type = (sysinfo->spd_type & 1) | ((sysinfo->spd_type & 8) >> 2); |
| printk(BIOS_SPEW, "DDR mask %x, DDR %d\n", spdinfo.dimm_mask, sysinfo->spd_type); |
| |
| if (sysinfo->spd_type == DDR2) { |
| die("DDR2 not supported at this time.\n"); |
| } else if (sysinfo->spd_type == DDR3) { |
| verify_ddr3(sysinfo, spdinfo.dimm_mask); |
| collect_ddr3(sysinfo, &spdinfo); |
| } else { |
| die("Will never support DDR1.\n"); |
| } |
| |
| for (i = 0; i < 2; i++) { |
| if ((spdinfo.dimm_mask >> (i*2)) & 1) { |
| printk(BIOS_SPEW, "Bank %d populated:\n" |
| " Raw card type: %4c\n" |
| " Row addr bits: %4u\n" |
| " Col addr bits: %4u\n" |
| " byte width: %4u\n" |
| " page size: %4u\n" |
| " banks: %4u\n" |
| " ranks: %4u\n" |
| " tAAmin: %3u\n" |
| " tCKmin: %3u\n" |
| " Max clock: %3u MHz\n" |
| " CAS: 0x%04x\n", |
| i, spdinfo.channel[i].raw_card + 'A', |
| spdinfo.channel[i].rows, spdinfo.channel[i].cols, |
| spdinfo.channel[i].width, spdinfo.channel[i].page_size, |
| spdinfo.channel[i].banks, spdinfo.channel[i].ranks, |
| spdinfo.channel[i].tAAmin, spdinfo.channel[i].tCKmin, |
| 8000 / spdinfo.channel[i].tCKmin, spdinfo.channel[i].cas_latencies); |
| } |
| } |
| |
| FOR_EACH_CHANNEL(i) { |
| sysinfo->dimms[i].card_type = |
| (spdinfo.dimm_mask & (1 << (i * 2))) ? spdinfo.channel[i].raw_card + 0xa : 0; |
| } |
| |
| /* Find common memory clock and CAS. */ |
| const unsigned int tCLK = find_common_clock_cas(sysinfo, &spdinfo); |
| |
| /* Calculate other timings from clock and CAS. */ |
| calculate_derived_timings(sysinfo, tCLK, &spdinfo); |
| |
| /* Initialize DIMM infos. */ |
| /* Always prefer interleaved over async channel mode. */ |
| FOR_EACH_CHANNEL(i) { |
| IF_CHANNEL_POPULATED(sysinfo->dimms, i) { |
| sysinfo->dimms[i].banks = spdinfo.channel[i].banks; |
| sysinfo->dimms[i].ranks = spdinfo.channel[i].ranks; |
| |
| /* .width is 1 for x8 or 2 for x16, bus width is 8 bytes. */ |
| const unsigned int chips_per_rank = 8 / spdinfo.channel[i].width; |
| |
| sysinfo->dimms[i].chip_width = spdinfo.channel[i].width; |
| sysinfo->dimms[i].chip_capacity = spdinfo.channel[i].chip_capacity; |
| sysinfo->dimms[i].page_size = spdinfo.channel[i].page_size * chips_per_rank; |
| sysinfo->dimms[i].rank_capacity_mb = |
| /* offset of chip_capacity is 8 (256M), therefore, add 8 |
| chip_capacity is in Mbit, we want MByte, therefore, subtract 3 */ |
| (1 << (spdinfo.channel[i].chip_capacity + 8 - 3)) * chips_per_rank; |
| } |
| } |
| if (CHANNEL_IS_POPULATED(sysinfo->dimms, 0) && |
| CHANNEL_IS_POPULATED(sysinfo->dimms, 1)) |
| sysinfo->selected_timings.channel_mode = CHANNEL_MODE_DUAL_INTERLEAVED; |
| else |
| sysinfo->selected_timings.channel_mode = CHANNEL_MODE_SINGLE; |
| } |
| |
| static void reset_on_bad_warmboot(void) |
| { |
| /* Check self refresh channel status. */ |
| const u32 reg = MCHBAR32(PMSTS_MCHBAR); |
| /* Clear status bits. R/WC */ |
| MCHBAR32(PMSTS_MCHBAR) = reg; |
| if ((reg & PMSTS_WARM_RESET) && !(reg & PMSTS_BOTH_SELFREFRESH)) { |
| printk(BIOS_INFO, "DRAM was not in self refresh " |
| "during warm boot, reset required.\n"); |
| gm45_early_reset(); |
| } |
| } |
| |
| static void set_system_memory_frequency(const timings_t *const timings) |
| { |
| MCHBAR16(CLKCFG_MCHBAR + 0x60) &= ~(1 << 15); |
| MCHBAR16(CLKCFG_MCHBAR + 0x48) &= ~(1 << 15); |
| |
| /* Calculate wanted frequency setting. */ |
| const int want_freq = 6 - timings->mem_clock; |
| |
| /* Read current memory frequency. */ |
| const u32 clkcfg = MCHBAR32(CLKCFG_MCHBAR); |
| int cur_freq = (clkcfg & CLKCFG_MEMCLK_MASK) >> CLKCFG_MEMCLK_SHIFT; |
| if (0 == cur_freq) { |
| /* Try memory frequency from scratchpad. */ |
| printk(BIOS_DEBUG, "Reading current memory frequency from scratchpad.\n"); |
| cur_freq = (MCHBAR16(SSKPD_MCHBAR) & SSKPD_CLK_MASK) >> SSKPD_CLK_SHIFT; |
| } |
| |
| if (cur_freq != want_freq) { |
| printk(BIOS_DEBUG, "Changing memory frequency: old %x, new %x.\n", cur_freq, want_freq); |
| /* When writing new frequency setting, reset, then set update bit. */ |
| MCHBAR32(CLKCFG_MCHBAR) = (MCHBAR32(CLKCFG_MCHBAR) & ~(CLKCFG_UPDATE | CLKCFG_MEMCLK_MASK)) | |
| (want_freq << CLKCFG_MEMCLK_SHIFT); |
| MCHBAR32(CLKCFG_MCHBAR) = (MCHBAR32(CLKCFG_MCHBAR) & ~CLKCFG_MEMCLK_MASK) | |
| (want_freq << CLKCFG_MEMCLK_SHIFT) | CLKCFG_UPDATE; |
| /* Reset update bit. */ |
| MCHBAR32(CLKCFG_MCHBAR) &= ~CLKCFG_UPDATE; |
| } |
| |
| if ((timings->fsb_clock == FSB_CLOCK_1067MHz) && (timings->mem_clock == MEM_CLOCK_667MT)) { |
| MCHBAR32(CLKCFG_MCHBAR + 0x16) = 0x000030f0; |
| MCHBAR32(CLKCFG_MCHBAR + 0x64) = 0x000050c1; |
| |
| MCHBAR32(CLKCFG_MCHBAR) = (MCHBAR32(CLKCFG_MCHBAR) & ~(1 << 12)) | (1 << 17); |
| MCHBAR32(CLKCFG_MCHBAR) |= (1 << 17) | (1 << 12); |
| MCHBAR32(CLKCFG_MCHBAR) &= ~(1 << 12); |
| |
| MCHBAR32(CLKCFG_MCHBAR + 0x04) = 0x9bad1f1f; |
| MCHBAR8(CLKCFG_MCHBAR + 0x08) = 0xf4; |
| MCHBAR8(CLKCFG_MCHBAR + 0x0a) = 0x43; |
| MCHBAR8(CLKCFG_MCHBAR + 0x0c) = 0x10; |
| MCHBAR8(CLKCFG_MCHBAR + 0x0d) = 0x80; |
| MCHBAR32(CLKCFG_MCHBAR + 0x50) = 0x0b0e151b; |
| MCHBAR8(CLKCFG_MCHBAR + 0x54) = 0xb4; |
| MCHBAR8(CLKCFG_MCHBAR + 0x55) = 0x10; |
| MCHBAR8(CLKCFG_MCHBAR + 0x56) = 0x08; |
| |
| MCHBAR32(CLKCFG_MCHBAR) |= (1 << 10); |
| MCHBAR32(CLKCFG_MCHBAR) |= (1 << 11); |
| MCHBAR32(CLKCFG_MCHBAR) &= ~(1 << 10); |
| MCHBAR32(CLKCFG_MCHBAR) &= ~(1 << 11); |
| } |
| |
| MCHBAR32(CLKCFG_MCHBAR + 0x48) |= 0x3f << 24; |
| } |
| |
| int raminit_read_vco_index(void) |
| { |
| switch (MCHBAR8(HPLLVCO_MCHBAR) & 0x7) { |
| case VCO_2666: |
| return 0; |
| case VCO_3200: |
| return 1; |
| case VCO_4000: |
| return 2; |
| case VCO_5333: |
| return 3; |
| default: |
| die("Unknown VCO frequency.\n"); |
| return 0; |
| } |
| } |
| static void set_igd_memory_frequencies(const sysinfo_t *const sysinfo) |
| { |
| const int gfx_idx = ((sysinfo->gfx_type == GMCH_GS45) && |
| !sysinfo->gs45_low_power_mode) |
| ? (GMCH_GS45 + 1) : sysinfo->gfx_type; |
| |
| /* Render and sampler frequency values seem to be some kind of factor. */ |
| const u16 render_freq_from_vco_and_gfxtype[][10] = { |
| /* GM45 GM47 GM49 GE45 GL40 GL43 GS40 GS45 (perf) */ |
| /* VCO 2666 */ { 0xd, 0xd, 0xe, 0xd, 0xb, 0xd, 0xb, 0xa, 0xd }, |
| /* VCO 3200 */ { 0xd, 0xe, 0xf, 0xd, 0xb, 0xd, 0xb, 0x9, 0xd }, |
| /* VCO 4000 */ { 0xc, 0xd, 0xf, 0xc, 0xa, 0xc, 0xa, 0x9, 0xc }, |
| /* VCO 5333 */ { 0xb, 0xc, 0xe, 0xb, 0x9, 0xb, 0x9, 0x8, 0xb }, |
| }; |
| const u16 sampler_freq_from_vco_and_gfxtype[][10] = { |
| /* GM45 GM47 GM49 GE45 GL40 GL43 GS40 GS45 (perf) */ |
| /* VCO 2666 */ { 0xc, 0xc, 0xd, 0xc, 0x9, 0xc, 0x9, 0x8, 0xc }, |
| /* VCO 3200 */ { 0xc, 0xd, 0xe, 0xc, 0x9, 0xc, 0x9, 0x8, 0xc }, |
| /* VCO 4000 */ { 0xa, 0xc, 0xd, 0xa, 0x8, 0xa, 0x8, 0x8, 0xa }, |
| /* VCO 5333 */ { 0xa, 0xa, 0xc, 0xa, 0x7, 0xa, 0x7, 0x6, 0xa }, |
| }; |
| const u16 display_clock_select_from_gfxtype[] = { |
| /* GM45 GM47 GM49 GE45 GL40 GL43 GS40 GS45 (perf) */ |
| 1, 1, 1, 1, 1, 1, 1, 0, 1 |
| }; |
| |
| if (pci_read_config16(GCFGC_PCIDEV, 0) != 0x8086) { |
| printk(BIOS_DEBUG, "Skipping IGD memory frequency setting.\n"); |
| return; |
| } |
| |
| MCHBAR16(0x119e) = 0xa800; |
| MCHBAR16(0x11c0) = (MCHBAR16(0x11c0) & ~0xff00) | (0x01 << 8); |
| MCHBAR16(0x119e) = 0xb800; |
| MCHBAR8(0x0f10) |= 1 << 7; |
| |
| /* Read VCO. */ |
| const int vco_idx = raminit_read_vco_index(); |
| printk(BIOS_DEBUG, "Setting IGD memory frequencies for VCO #%d.\n", vco_idx); |
| |
| const u32 freqcfg = |
| ((render_freq_from_vco_and_gfxtype[vco_idx][gfx_idx] |
| << GCFGC_CR_SHIFT) & GCFGC_CR_MASK) | |
| ((sampler_freq_from_vco_and_gfxtype[vco_idx][gfx_idx] |
| << GCFGC_CS_SHIFT) & GCFGC_CS_MASK); |
| |
| /* Set frequencies, clear update bit. */ |
| u32 gcfgc = pci_read_config16(GCFGC_PCIDEV, GCFGC_OFFSET); |
| gcfgc &= ~(GCFGC_CS_MASK | GCFGC_UPDATE | GCFGC_CR_MASK); |
| gcfgc |= freqcfg; |
| pci_write_config16(GCFGC_PCIDEV, GCFGC_OFFSET, gcfgc); |
| |
| /* Set frequencies, set update bit. */ |
| gcfgc = pci_read_config16(GCFGC_PCIDEV, GCFGC_OFFSET); |
| gcfgc &= ~(GCFGC_CS_MASK | GCFGC_CR_MASK); |
| gcfgc |= freqcfg | GCFGC_UPDATE; |
| pci_write_config16(GCFGC_PCIDEV, GCFGC_OFFSET, gcfgc); |
| |
| /* Clear update bit. */ |
| pci_write_config16(GCFGC_PCIDEV, GCFGC_OFFSET, |
| pci_read_config16(GCFGC_PCIDEV, GCFGC_OFFSET) & ~GCFGC_UPDATE); |
| |
| /* Set display clock select bit. */ |
| pci_write_config16(GCFGC_PCIDEV, GCFGC_OFFSET, |
| (pci_read_config16(GCFGC_PCIDEV, GCFGC_OFFSET) & ~GCFGC_CD_MASK) | |
| (display_clock_select_from_gfxtype[gfx_idx] << GCFGC_CD_SHIFT)); |
| } |
| |
| static void configure_dram_control_mode(const timings_t *const timings, const dimminfo_t *const dimms) |
| { |
| int ch, r; |
| |
| FOR_EACH_CHANNEL(ch) { |
| unsigned int mchbar = CxDRC0_MCHBAR(ch); |
| u32 cxdrc = MCHBAR32(mchbar); |
| cxdrc &= ~CxDRC0_RANKEN_MASK; |
| FOR_EACH_POPULATED_RANK_IN_CHANNEL(dimms, ch, r) |
| cxdrc |= CxDRC0_RANKEN(r); |
| cxdrc = (cxdrc & ~CxDRC0_RMS_MASK) | |
| /* Always 7.8us for DDR3: */ |
| CxDRC0_RMS_78US; |
| MCHBAR32(mchbar) = cxdrc; |
| |
| mchbar = CxDRC1_MCHBAR(ch); |
| cxdrc = MCHBAR32(mchbar); |
| cxdrc |= CxDRC1_NOTPOP_MASK; |
| FOR_EACH_POPULATED_RANK_IN_CHANNEL(dimms, ch, r) |
| cxdrc &= ~CxDRC1_NOTPOP(r); |
| cxdrc |= CxDRC1_MUSTWR; |
| MCHBAR32(mchbar) = cxdrc; |
| |
| mchbar = CxDRC2_MCHBAR(ch); |
| cxdrc = MCHBAR32(mchbar); |
| cxdrc |= CxDRC2_NOTPOP_MASK; |
| FOR_EACH_POPULATED_RANK_IN_CHANNEL(dimms, ch, r) |
| cxdrc &= ~CxDRC2_NOTPOP(r); |
| cxdrc |= CxDRC2_MUSTWR; |
| if (timings->mem_clock == MEM_CLOCK_1067MT) |
| cxdrc |= CxDRC2_CLK1067MT; |
| MCHBAR32(mchbar) = cxdrc; |
| } |
| } |
| |
| static void rcomp_initialization(const stepping_t stepping, const int sff) |
| { |
| /* Program RCOMP codes. */ |
| if (sff) |
| die("SFF platform unsupported in RCOMP initialization.\n"); |
| /* Values are for DDR3. */ |
| MCHBAR8(0x6ac) &= ~0x0f; |
| MCHBAR8(0x6b0) = 0x55; |
| MCHBAR8(0x6ec) &= ~0x0f; |
| MCHBAR8(0x6f0) = 0x66; |
| MCHBAR8(0x72c) &= ~0x0f; |
| MCHBAR8(0x730) = 0x66; |
| MCHBAR8(0x76c) &= ~0x0f; |
| MCHBAR8(0x770) = 0x66; |
| MCHBAR8(0x7ac) &= ~0x0f; |
| MCHBAR8(0x7b0) = 0x66; |
| MCHBAR8(0x7ec) &= ~0x0f; |
| MCHBAR8(0x7f0) = 0x66; |
| MCHBAR8(0x86c) &= ~0x0f; |
| MCHBAR8(0x870) = 0x55; |
| MCHBAR8(0x8ac) &= ~0x0f; |
| MCHBAR8(0x8b0) = 0x66; |
| /* ODT multiplier bits. */ |
| MCHBAR32(0x04d0) = (MCHBAR32(0x04d0) & ~((7 << 3) | (7 << 0))) | (2 << 3) | (2 << 0); |
| |
| /* Perform RCOMP calibration for DDR3. */ |
| raminit_rcomp_calibration(stepping); |
| |
| /* Run initial RCOMP. */ |
| MCHBAR32(0x418) |= 1 << 17; |
| MCHBAR32(0x40c) &= ~(1 << 23); |
| MCHBAR32(0x41c) &= ~((1 << 7) | (1 << 3)); |
| MCHBAR32(0x400) |= 1; |
| while (MCHBAR32(0x400) & 1) {} |
| |
| /* Run second RCOMP. */ |
| MCHBAR32(0x40c) |= 1 << 19; |
| MCHBAR32(0x400) |= 1; |
| while (MCHBAR32(0x400) & 1) {} |
| |
| /* Cleanup and start periodic RCOMP. */ |
| MCHBAR32(0x40c) &= ~(1 << 19); |
| MCHBAR32(0x40c) |= 1 << 23; |
| MCHBAR32(0x418) &= ~(1 << 17); |
| MCHBAR32(0x41c) |= (1 << 7) | (1 << 3); |
| MCHBAR32(0x400) |= (1 << 1); |
| } |
| |
| static void dram_powerup(const int resume) |
| { |
| udelay(200); |
| MCHBAR32(CLKCFG_MCHBAR) = (MCHBAR32(CLKCFG_MCHBAR) & ~(1 << 3)) | (3 << 21); |
| if (!resume) { |
| MCHBAR32(0x1434) |= (1 << 10); |
| udelay(1); |
| } |
| MCHBAR32(0x1434) |= (1 << 6); |
| if (!resume) { |
| udelay(1); |
| MCHBAR32(0x1434) |= (1 << 9); |
| MCHBAR32(0x1434) &= ~(1 << 10); |
| udelay(500); |
| } |
| } |
| static void dram_program_timings(const timings_t *const timings) |
| { |
| /* Values are for DDR3. */ |
| const int burst_length = 8; |
| const int tWTR = 4, tRTP = 1; |
| int i; |
| |
| FOR_EACH_CHANNEL(i) { |
| u32 reg = MCHBAR32(CxDRT0_MCHBAR(i)); |
| const int btb_wtp = timings->tWL + burst_length/2 + timings->tWR; |
| const int btb_wtr = timings->tWL + burst_length/2 + tWTR; |
| reg = (reg & ~(CxDRT0_BtB_WtP_MASK | CxDRT0_BtB_WtR_MASK)) | |
| ((btb_wtp << CxDRT0_BtB_WtP_SHIFT) & CxDRT0_BtB_WtP_MASK) | |
| ((btb_wtr << CxDRT0_BtB_WtR_SHIFT) & CxDRT0_BtB_WtR_MASK); |
| if (timings->mem_clock != MEM_CLOCK_1067MT) { |
| reg = (reg & ~(0x7 << 15)) | ((9 - timings->CAS) << 15); |
| reg = (reg & ~(0xf << 10)) | ((timings->CAS - 3) << 10); |
| } else { |
| reg = (reg & ~(0x7 << 15)) | ((10 - timings->CAS) << 15); |
| reg = (reg & ~(0xf << 10)) | ((timings->CAS - 4) << 10); |
| } |
| reg = (reg & ~(0x7 << 5)) | (3 << 5); |
| reg = (reg & ~(0x7 << 0)) | (1 << 0); |
| MCHBAR32(CxDRT0_MCHBAR(i)) = reg; |
| |
| reg = MCHBAR32(CxDRT1_MCHBAR(i)); |
| reg = (reg & ~(0x03 << 28)) | ((tRTP & 0x03) << 28); |
| reg = (reg & ~(0x1f << 21)) | ((timings->tRAS & 0x1f) << 21); |
| reg = (reg & ~(0x07 << 10)) | (((timings->tRRD - 2) & 0x07) << 10); |
| reg = (reg & ~(0x07 << 5)) | (((timings->tRCD - 2) & 0x07) << 5); |
| reg = (reg & ~(0x07 << 0)) | (((timings->tRP - 2) & 0x07) << 0); |
| MCHBAR32(CxDRT1_MCHBAR(i)) = reg; |
| |
| reg = MCHBAR32(CxDRT2_MCHBAR(i)); |
| reg = (reg & ~(0x1f << 17)) | ((timings->tFAW & 0x1f) << 17); |
| if (timings->mem_clock != MEM_CLOCK_1067MT) { |
| reg = (reg & ~(0x7 << 12)) | (0x2 << 12); |
| reg = (reg & ~(0xf << 6)) | (0x9 << 6); |
| } else { |
| reg = (reg & ~(0x7 << 12)) | (0x3 << 12); |
| reg = (reg & ~(0xf << 6)) | (0xc << 6); |
| } |
| reg = (reg & ~(0x1f << 0)) | (0x13 << 0); |
| MCHBAR32(CxDRT2_MCHBAR(i)) = reg; |
| |
| reg = MCHBAR32(CxDRT3_MCHBAR(i)); |
| reg |= 0x3 << 28; |
| reg = (reg & ~(0x03 << 26)); |
| reg = (reg & ~(0x07 << 23)) | (((timings->CAS - 3) & 0x07) << 23); |
| reg = (reg & ~(0xff << 13)) | ((timings->tRFC & 0xff) << 13); |
| reg = (reg & ~(0x07 << 0)) | (((timings->tWL - 2) & 0x07) << 0); |
| MCHBAR32(CxDRT3_MCHBAR(i)) = reg; |
| |
| reg = MCHBAR32(CxDRT4_MCHBAR(i)); |
| static const u8 timings_by_clock[4][3] = { |
| /* 333MHz 400MHz 533MHz |
| 667MT 800MT 1067MT */ |
| { 0x07, 0x0a, 0x0d }, |
| { 0x3a, 0x46, 0x5d }, |
| { 0x0c, 0x0e, 0x18 }, |
| { 0x21, 0x28, 0x35 }, |
| }; |
| const int clk_idx = 2 - timings->mem_clock; |
| reg = (reg & ~(0x01f << 27)) | (timings_by_clock[0][clk_idx] << 27); |
| reg = (reg & ~(0x3ff << 17)) | (timings_by_clock[1][clk_idx] << 17); |
| reg = (reg & ~(0x03f << 10)) | (timings_by_clock[2][clk_idx] << 10); |
| reg = (reg & ~(0x1ff << 0)) | (timings_by_clock[3][clk_idx] << 0); |
| MCHBAR32(CxDRT4_MCHBAR(i)) = reg; |
| |
| reg = MCHBAR32(CxDRT5_MCHBAR(i)); |
| if (timings->mem_clock == MEM_CLOCK_1067MT) |
| reg = (reg & ~(0xf << 28)) | (0x8 << 28); |
| reg = (reg & ~(0x00f << 22)) | ((burst_length/2 + timings->CAS + 2) << 22); |
| reg = (reg & ~(0x3ff << 12)) | (0x190 << 12); |
| reg = (reg & ~(0x00f << 4)) | ((timings->CAS - 2) << 4); |
| reg = (reg & ~(0x003 << 2)) | (0x001 << 2); |
| reg = (reg & ~(0x003 << 0)); |
| MCHBAR32(CxDRT5_MCHBAR(i)) = reg; |
| |
| reg = MCHBAR32(CxDRT6_MCHBAR(i)); |
| reg = (reg & ~(0xffff << 16)) | (0x066a << 16); /* always 7.8us refresh rate for DDR3 */ |
| reg |= (1 << 2); |
| MCHBAR32(CxDRT6_MCHBAR(i)) = reg; |
| } |
| } |
| |
| static void dram_program_banks(const dimminfo_t *const dimms) |
| { |
| int ch, r; |
| |
| FOR_EACH_CHANNEL(ch) { |
| const int tRPALL = dimms[ch].banks == 8; |
| |
| u32 reg = MCHBAR32(CxDRT1_MCHBAR(ch)) & ~(0x01 << 15); |
| IF_CHANNEL_POPULATED(dimms, ch) |
| reg |= tRPALL << 15; |
| MCHBAR32(CxDRT1_MCHBAR(ch)) = reg; |
| |
| reg = MCHBAR32(CxDRA_MCHBAR(ch)) & ~CxDRA_BANKS_MASK; |
| FOR_EACH_POPULATED_RANK_IN_CHANNEL(dimms, ch, r) { |
| reg |= CxDRA_BANKS(r, dimms[ch].banks); |
| } |
| MCHBAR32(CxDRA_MCHBAR(ch)) = reg; |
| } |
| } |
| |
| static void odt_setup(const timings_t *const timings, const int sff) |
| { |
| /* Values are for DDR3. */ |
| int ch; |
| |
| FOR_EACH_CHANNEL(ch) { |
| u32 reg = MCHBAR32(CxODT_HIGH(ch)); |
| if (sff && (timings->mem_clock != MEM_CLOCK_1067MT)) |
| reg &= ~(0x3 << (61 - 32)); |
| else |
| reg |= 0x3 << (61 - 32); |
| reg = (reg & ~(0x3 << (52 - 32))) | (0x2 << (52 - 32)); |
| reg = (reg & ~(0x7 << (48 - 32))) | ((timings->CAS - 3) << (48 - 32)); |
| reg = (reg & ~(0xf << (44 - 32))) | (0x7 << (44 - 32)); |
| if (timings->mem_clock != MEM_CLOCK_1067MT) { |
| reg = (reg & ~(0xf << (40 - 32))) | ((12 - timings->CAS) << (40 - 32)); |
| reg = (reg & ~(0xf << (36 - 32))) | (( 2 + timings->CAS) << (36 - 32)); |
| } else { |
| reg = (reg & ~(0xf << (40 - 32))) | ((13 - timings->CAS) << (40 - 32)); |
| reg = (reg & ~(0xf << (36 - 32))) | (( 1 + timings->CAS) << (36 - 32)); |
| } |
| reg = (reg & ~(0xf << (32 - 32))) | (0x7 << (32 - 32)); |
| MCHBAR32(CxODT_HIGH(ch)) = reg; |
| |
| reg = MCHBAR32(CxODT_LOW(ch)); |
| reg = (reg & ~(0x7 << 28)) | (0x2 << 28); |
| reg = (reg & ~(0x3 << 22)) | (0x2 << 22); |
| reg = (reg & ~(0x7 << 12)) | (0x2 << 12); |
| reg = (reg & ~(0x7 << 4)) | (0x2 << 4); |
| switch (timings->mem_clock) { |
| case MEM_CLOCK_667MT: |
| reg = (reg & ~0x7); |
| break; |
| case MEM_CLOCK_800MT: |
| reg = (reg & ~0x7) | 0x2; |
| break; |
| case MEM_CLOCK_1067MT: |
| reg = (reg & ~0x7) | 0x5; |
| break; |
| } |
| MCHBAR32(CxODT_LOW(ch)) = reg; |
| } |
| } |
| |
| static void misc_settings(const timings_t *const timings, |
| const stepping_t stepping) |
| { |
| MCHBAR32(0x1260) = (MCHBAR32(0x1260) & ~((1 << 24) | 0x1f)) | timings->tRD; |
| MCHBAR32(0x1360) = (MCHBAR32(0x1360) & ~((1 << 24) | 0x1f)) | timings->tRD; |
| |
| MCHBAR8(0x1268) = (MCHBAR8(0x1268) & ~(0xf)) | timings->tWL; |
| MCHBAR8(0x1368) = (MCHBAR8(0x1368) & ~(0xf)) | timings->tWL; |
| MCHBAR8(0x12a0) = (MCHBAR8(0x12a0) & ~(0xf)) | 0xa; |
| MCHBAR8(0x13a0) = (MCHBAR8(0x13a0) & ~(0xf)) | 0xa; |
| |
| MCHBAR32(0x218) = (MCHBAR32(0x218) & ~((7 << 29) | (7 << 25) | (3 << 22) | (3 << 10))) | |
| (4 << 29) | (3 << 25) | (0 << 22) | (1 << 10); |
| MCHBAR32(0x220) = (MCHBAR32(0x220) & ~(7 << 16)) | (1 << 21) | (1 << 16); |
| MCHBAR32(0x224) = (MCHBAR32(0x224) & ~(7 << 8)) | (3 << 8); |
| if (stepping >= STEPPING_B1) |
| MCHBAR8(0x234) |= (1 << 3); |
| } |
| |
| static void clock_crossing_setup(const fsb_clock_t fsb, |
| const mem_clock_t ddr3clock, |
| const dimminfo_t *const dimms) |
| { |
| int ch; |
| |
| static const u32 values_from_fsb_and_mem[][3][4] = { |
| /* FSB 1067MHz */{ |
| /* DDR3-1067 */ { 0x00000000, 0x00000000, 0x00180006, 0x00810060 }, |
| /* DDR3-800 */ { 0x00000000, 0x00000000, 0x0000001c, 0x000300e0 }, |
| /* DDR3-667 */ { 0x00000000, 0x00001c00, 0x03c00038, 0x0007e000 }, |
| }, |
| /* FSB 800MHz */{ |
| /* DDR3-1067 */ { 0, 0, 0, 0 }, |
| /* DDR3-800 */ { 0x00000000, 0x00000000, 0x0030000c, 0x000300c0 }, |
| /* DDR3-667 */ { 0x00000000, 0x00000380, 0x0060001c, 0x00030c00 }, |
| }, |
| /* FSB 667MHz */{ |
| /* DDR3-1067 */ { 0, 0, 0, 0 }, |
| /* DDR3-800 */ { 0, 0, 0, 0 }, |
| /* DDR3-667 */ { 0x00000000, 0x00000000, 0x0030000c, 0x000300c0 }, |
| }, |
| }; |
| |
| const u32 *data = values_from_fsb_and_mem[fsb][ddr3clock]; |
| MCHBAR32(0x0208) = data[3]; |
| MCHBAR32(0x020c) = data[2]; |
| if (((fsb == FSB_CLOCK_1067MHz) || (fsb == FSB_CLOCK_800MHz)) && (ddr3clock == MEM_CLOCK_667MT)) |
| MCHBAR32(0x0210) = data[1]; |
| |
| static const u32 from_fsb_and_mem[][3] = { |
| /* DDR3-1067 DDR3-800 DDR3-667 */ |
| /* FSB 1067MHz */{ 0x40100401, 0x10040220, 0x08040110, }, |
| /* FSB 800MHz */{ 0x00000000, 0x40100401, 0x00080201, }, |
| /* FSB 667MHz */{ 0x00000000, 0x00000000, 0x40100401, }, |
| }; |
| FOR_EACH_CHANNEL(ch) { |
| const unsigned int mchbar = 0x1258 + (ch * 0x0100); |
| if ((fsb == FSB_CLOCK_1067MHz) && (ddr3clock == MEM_CLOCK_800MT) && CHANNEL_IS_CARDF(dimms, ch)) |
| MCHBAR32(mchbar) = 0x08040120; |
| else |
| MCHBAR32(mchbar) = from_fsb_and_mem[fsb][ddr3clock]; |
| MCHBAR32(mchbar + 4) = 0x00000000; |
| } |
| } |
| |
| /* Program egress VC1 timings. */ |
| static void vc1_program_timings(const fsb_clock_t fsb) |
| { |
| const u32 timings_by_fsb[][2] = { |
| /* FSB 1067MHz */ { 0x1a, 0x01380138 }, |
| /* FSB 800MHz */ { 0x14, 0x00f000f0 }, |
| /* FSB 667MHz */ { 0x10, 0x00c000c0 }, |
| }; |
| EPBAR8(0x2c) = timings_by_fsb[fsb][0]; |
| EPBAR32(0x38) = timings_by_fsb[fsb][1]; |
| EPBAR32(0x3c) = timings_by_fsb[fsb][1]; |
| } |
| |
| #define DEFAULT_PCI_MMIO_SIZE 2048 |
| #define HOST_BRIDGE PCI_DEVFN(0, 0) |
| |
| static unsigned int get_mmio_size(void) |
| { |
| const struct device *dev; |
| const struct northbridge_intel_gm45_config *cfg = NULL; |
| |
| dev = dev_find_slot(0, HOST_BRIDGE); |
| if (dev) |
| cfg = dev->chip_info; |
| |
| /* If this is zero, it just means devicetree.cb didn't set it */ |
| if (!cfg || cfg->pci_mmio_size == 0) |
| return DEFAULT_PCI_MMIO_SIZE; |
| else |
| return cfg->pci_mmio_size; |
| } |
| |
| /* @prejedec if not zero, set rank size to 128MB and page size to 4KB. */ |
| static void program_memory_map(const dimminfo_t *const dimms, const channel_mode_t mode, const int prejedec, u16 ggc) |
| { |
| int ch, r; |
| |
| /* Program rank boundaries (CxDRBy). */ |
| unsigned int base = 0; /* start of next rank in MB */ |
| unsigned int total_mb[2] = { 0, 0 }; /* total memory per channel in MB */ |
| FOR_EACH_CHANNEL(ch) { |
| if (mode == CHANNEL_MODE_DUAL_INTERLEAVED) |
| /* In interleaved mode, start every channel from 0. */ |
| base = 0; |
| for (r = 0; r < RANKS_PER_CHANNEL; r += 2) { |
| /* Fixed capacity for pre-jedec config. */ |
| const unsigned int rank_capacity_mb = |
| prejedec ? 128 : dimms[ch].rank_capacity_mb; |
| u32 reg = 0; |
| |
| /* Program bounds in CxDRBy. */ |
| IF_RANK_POPULATED(dimms, ch, r) { |
| base += rank_capacity_mb; |
| total_mb[ch] += rank_capacity_mb; |
| } |
| reg |= CxDRBy_BOUND_MB(r, base); |
| IF_RANK_POPULATED(dimms, ch, r+1) { |
| base += rank_capacity_mb; |
| total_mb[ch] += rank_capacity_mb; |
| } |
| reg |= CxDRBy_BOUND_MB(r+1, base); |
| |
| MCHBAR32(CxDRBy_MCHBAR(ch, r)) = reg; |
| } |
| } |
| |
| /* Program page size (CxDRA). */ |
| FOR_EACH_CHANNEL(ch) { |
| u32 reg = MCHBAR32(CxDRA_MCHBAR(ch)) & ~CxDRA_PAGESIZE_MASK; |
| FOR_EACH_POPULATED_RANK_IN_CHANNEL(dimms, ch, r) { |
| /* Fixed page size for pre-jedec config. */ |
| const unsigned int page_size = /* dimm page size in bytes */ |
| prejedec ? 4096 : dimms[ch].page_size; |
| reg |= CxDRA_PAGESIZE(r, log2(page_size)); |
| /* deferred to f5_27: reg |= CxDRA_BANKS(r, dimms[ch].banks); */ |
| } |
| MCHBAR32(CxDRA_MCHBAR(ch)) = reg; |
| } |
| |
| /* Calculate memory mapping, all values in MB. */ |
| |
| u32 uma_sizem = 0; |
| if (!prejedec) { |
| if (!(ggc & 2)) { |
| printk(BIOS_DEBUG, "IGD decoded, subtracting "); |
| |
| /* Graphics memory */ |
| const u32 gms_sizek = decode_igd_memory_size((ggc >> 4) & 0xf); |
| printk(BIOS_DEBUG, "%uM UMA", gms_sizek >> 10); |
| |
| /* GTT Graphics Stolen Memory Size (GGMS) */ |
| const u32 gsm_sizek = decode_igd_gtt_size((ggc >> 8) & 0xf); |
| printk(BIOS_DEBUG, " and %uM GTT\n", gsm_sizek >> 10); |
| |
| uma_sizem = (gms_sizek + gsm_sizek) >> 10; |
| } |
| /* TSEG 8M */ |
| u8 reg8 = pci_read_config8(PCI_DEV(0, 0, 0), D0F0_ESMRAMC); |
| reg8 &= ~0x7; |
| reg8 |= (2 << 1) | (1 << 0); /* 8M and TSEG_Enable */ |
| pci_write_config8(PCI_DEV(0, 0, 0), D0F0_ESMRAMC, reg8); |
| uma_sizem += 8; |
| } |
| |
| const unsigned int mmio_size = get_mmio_size(); |
| const unsigned int MMIOstart = 4096 - mmio_size + uma_sizem; |
| const int me_active = pci_read_config8(PCI_DEV(0, 3, 0), PCI_CLASS_REVISION) != 0xff; |
| const unsigned int ME_SIZE = prejedec || !me_active ? 0 : 32; |
| const unsigned int usedMEsize = (total_mb[0] != total_mb[1]) ? ME_SIZE : 2 * ME_SIZE; |
| const unsigned int claimCapable = |
| !(pci_read_config32(PCI_DEV(0, 0, 0), D0F0_CAPID0 + 4) & (1 << (47 - 32))); |
| |
| const unsigned int TOM = total_mb[0] + total_mb[1]; |
| unsigned int TOMminusME = TOM - usedMEsize; |
| unsigned int TOLUD = (TOMminusME < MMIOstart) ? TOMminusME : MMIOstart; |
| unsigned int TOUUD = TOMminusME; |
| unsigned int REMAPbase = 0xffff, REMAPlimit = 0; |
| |
| if (claimCapable && (TOMminusME >= (MMIOstart + 64))) { |
| /* 64MB alignment: We'll lose some MBs here, if ME is on. */ |
| TOMminusME &= ~(64 - 1); |
| /* 64MB alignment: Loss will be reclaimed. */ |
| TOLUD &= ~(64 - 1); |
| if (TOMminusME > 4096) { |
| REMAPbase = TOMminusME; |
| REMAPlimit = REMAPbase + (4096 - TOLUD); |
| } else { |
| REMAPbase = 4096; |
| REMAPlimit = REMAPbase + (TOMminusME - TOLUD); |
| } |
| TOUUD = REMAPlimit; |
| /* REMAPlimit is an inclusive bound, all others exclusive. */ |
| REMAPlimit -= 64; |
| } |
| |
| pci_write_config16(PCI_DEV(0, 0, 0), D0F0_TOM, (TOM >> 7) & 0x1ff); |
| pci_write_config16(PCI_DEV(0, 0, 0), D0F0_TOLUD, TOLUD << 4); |
| pci_write_config16(PCI_DEV(0, 0, 0), D0F0_TOUUD, TOUUD); |
| pci_write_config16(PCI_DEV(0, 0, 0), D0F0_REMAPBASE, (REMAPbase >> 6) & 0x03ff); |
| pci_write_config16(PCI_DEV(0, 0, 0), D0F0_REMAPLIMIT, (REMAPlimit >> 6) & 0x03ff); |
| |
| /* Program channel mode. */ |
| switch (mode) { |
| case CHANNEL_MODE_SINGLE: |
| printk(BIOS_DEBUG, "Memory configured in single-channel mode.\n"); |
| MCHBAR32(DCC_MCHBAR) &= ~DCC_INTERLEAVED; |
| break; |
| case CHANNEL_MODE_DUAL_ASYNC: |
| printk(BIOS_DEBUG, "Memory configured in dual-channel assymetric mode.\n"); |
| MCHBAR32(DCC_MCHBAR) &= ~DCC_INTERLEAVED; |
| break; |
| case CHANNEL_MODE_DUAL_INTERLEAVED: |
| printk(BIOS_DEBUG, "Memory configured in dual-channel interleaved mode.\n"); |
| MCHBAR32(DCC_MCHBAR) &= ~(DCC_NO_CHANXOR | (1 << 9)); |
| MCHBAR32(DCC_MCHBAR) |= DCC_INTERLEAVED; |
| break; |
| } |
| |
| printk(BIOS_SPEW, "Memory map:\n" |
| "TOM = %5uMB\n" |
| "TOLUD = %5uMB\n" |
| "TOUUD = %5uMB\n" |
| "REMAP:\t base = %5uMB\n" |
| "\t limit = %5uMB\n" |
| "usedMEsize: %dMB\n", |
| TOM, TOLUD, TOUUD, REMAPbase, REMAPlimit, usedMEsize); |
| } |
| static void prejedec_memory_map(const dimminfo_t *const dimms, channel_mode_t mode) |
| { |
| /* Never use dual-interleaved mode in pre-jedec config. */ |
| if (CHANNEL_MODE_DUAL_INTERLEAVED == mode) |
| mode = CHANNEL_MODE_DUAL_ASYNC; |
| |
| program_memory_map(dimms, mode, 1, 0); |
| MCHBAR32(DCC_MCHBAR) |= DCC_NO_CHANXOR; |
| } |
| |
| static void ddr3_select_clock_mux(const mem_clock_t ddr3clock, |
| const dimminfo_t *const dimms, |
| const stepping_t stepping) |
| { |
| const int clk1067 = (ddr3clock == MEM_CLOCK_1067MT); |
| const int cardF[] = { CHANNEL_IS_CARDF(dimms, 0), CHANNEL_IS_CARDF(dimms, 1) }; |
| |
| int ch; |
| |
| if (stepping < STEPPING_B1) |
| die("Stepping <B1 unsupported in clock-multiplexer selection.\n"); |
| |
| FOR_EACH_POPULATED_CHANNEL(dimms, ch) { |
| int mixed = 0; |
| if ((1 == ch) && (!CHANNEL_IS_POPULATED(dimms, 0) || (cardF[0] != cardF[1]))) |
| mixed = 4 << 11; |
| const unsigned int b = 0x14b0 + (ch * 0x0100); |
| MCHBAR32(b+0x1c) = (MCHBAR32(b+0x1c) & ~(7 << 11)) | |
| ((( cardF[ch])?1:0) << 11) | mixed; |
| MCHBAR32(b+0x18) = (MCHBAR32(b+0x18) & ~(7 << 11)) | mixed; |
| MCHBAR32(b+0x14) = (MCHBAR32(b+0x14) & ~(7 << 11)) | |
| (((!clk1067 && !cardF[ch])?0:1) << 11) | mixed; |
| MCHBAR32(b+0x10) = (MCHBAR32(b+0x10) & ~(7 << 11)) | |
| ((( clk1067 && !cardF[ch])?1:0) << 11) | mixed; |
| MCHBAR32(b+0x0c) = (MCHBAR32(b+0x0c) & ~(7 << 11)) | |
| ((( cardF[ch])?3:2) << 11) | mixed; |
| MCHBAR32(b+0x08) = (MCHBAR32(b+0x08) & ~(7 << 11)) | |
| (2 << 11) | mixed; |
| MCHBAR32(b+0x04) = (MCHBAR32(b+0x04) & ~(7 << 11)) | |
| (((!clk1067 && !cardF[ch])?2:3) << 11) | mixed; |
| MCHBAR32(b+0x00) = (MCHBAR32(b+0x00) & ~(7 << 11)) | |
| ((( clk1067 && !cardF[ch])?3:2) << 11) | mixed; |
| } |
| } |
| static void ddr3_write_io_init(const mem_clock_t ddr3clock, |
| const dimminfo_t *const dimms, |
| const stepping_t stepping, |
| const int sff) |
| { |
| const int a1step = stepping >= STEPPING_CONVERSION_A1; |
| const int cardF[] = { CHANNEL_IS_CARDF(dimms, 0), CHANNEL_IS_CARDF(dimms, 1) }; |
| |
| int ch; |
| |
| if (stepping < STEPPING_B1) |
| die("Stepping <B1 unsupported in write i/o initialization.\n"); |
| if (sff) |
| die("SFF platform unsupported in write i/o initialization.\n"); |
| |
| static const u32 ddr3_667_800_by_stepping_ddr3_and_card[][2][2][4] = { |
| { /* Stepping B3 and below */ |
| { /* 667 MHz */ |
| { 0xa3255008, 0x26888209, 0x26288208, 0x6188040f }, |
| { 0x7524240b, 0xa5255608, 0x232b8508, 0x5528040f }, |
| }, |
| { /* 800 MHz */ |
| { 0xa6255308, 0x26888209, 0x212b7508, 0x6188040f }, |
| { 0x7524240b, 0xa6255708, 0x132b7508, 0x5528040f }, |
| }, |
| }, |
| { /* Conversion stepping A1 and above */ |
| { /* 667 MHz */ |
| { 0xc5257208, 0x26888209, 0x26288208, 0x6188040f }, |
| { 0x7524240b, 0xc5257608, 0x232b8508, 0x5528040f }, |
| }, |
| { /* 800 MHz */ |
| { 0xb6256308, 0x26888209, 0x212b7508, 0x6188040f }, |
| { 0x7524240b, 0xb6256708, 0x132b7508, 0x5528040f }, |
| } |
| }}; |
| |
| static const u32 ddr3_1067_by_channel_and_card[][2][4] = { |
| { /* Channel A */ |
| { 0xb2254708, 0x002b7408, 0x132b8008, 0x7228060f }, |
| { 0xb0255008, 0xa4254108, 0x4528b409, 0x9428230f }, |
| }, |
| { /* Channel B */ |
| { 0xa4254208, 0x022b6108, 0x132b8208, 0x9228210f }, |
| { 0x6024140b, 0x92244408, 0x252ba409, 0x9328360c }, |
| }, |
| }; |
| |
| FOR_EACH_POPULATED_CHANNEL(dimms, ch) { |
| if ((1 == ch) && CHANNEL_IS_POPULATED(dimms, 0) && (cardF[0] == cardF[1])) |
| /* Only write if second channel population differs. */ |
| continue; |
| const u32 *const data = (ddr3clock != MEM_CLOCK_1067MT) |
| ? ddr3_667_800_by_stepping_ddr3_and_card[a1step][2 - ddr3clock][cardF[ch]] |
| : ddr3_1067_by_channel_and_card[ch][cardF[ch]]; |
| MCHBAR32(CxWRTy_MCHBAR(ch, 0)) = data[0]; |
| MCHBAR32(CxWRTy_MCHBAR(ch, 1)) = data[1]; |
| MCHBAR32(CxWRTy_MCHBAR(ch, 2)) = data[2]; |
| MCHBAR32(CxWRTy_MCHBAR(ch, 3)) = data[3]; |
| } |
| |
| MCHBAR32(0x1490) = 0x00e70067; |
| MCHBAR32(0x1494) = 0x000d8000; |
| MCHBAR32(0x1590) = 0x00e70067; |
| MCHBAR32(0x1594) = 0x000d8000; |
| } |
| static void ddr3_read_io_init(const mem_clock_t ddr3clock, |
| const dimminfo_t *const dimms, |
| const int sff) |
| { |
| int ch; |
| |
| FOR_EACH_POPULATED_CHANNEL(dimms, ch) { |
| u32 addr, tmp; |
| const unsigned int base = 0x14b0 + (ch * 0x0100); |
| for (addr = base + 0x1c; addr >= base; addr -= 4) { |
| tmp = MCHBAR32(addr); |
| tmp &= ~((3 << 25) | (1 << 8) | (7 << 16) | (0xf << 20) | (1 << 27)); |
| tmp |= (1 << 27); |
| switch (ddr3clock) { |
| case MEM_CLOCK_667MT: |
| tmp |= (1 << 16) | (4 << 20); |
| break; |
| case MEM_CLOCK_800MT: |
| tmp |= (2 << 16) | (3 << 20); |
| break; |
| case MEM_CLOCK_1067MT: |
| if (!sff) |
| tmp |= (2 << 16) | (1 << 20); |
| else |
| tmp |= (2 << 16) | (2 << 20); |
| break; |
| default: |
| die("Wrong clock"); |
| } |
| MCHBAR32(addr) = tmp; |
| } |
| } |
| } |
| |
| static void memory_io_init(const mem_clock_t ddr3clock, |
| const dimminfo_t *const dimms, |
| const stepping_t stepping, |
| const int sff) |
| { |
| u32 tmp; |
| |
| if (stepping < STEPPING_B1) |
| die("Stepping <B1 unsupported in " |
| "system-memory i/o initialization.\n"); |
| |
| tmp = MCHBAR32(0x1400); |
| tmp &= ~(3<<13); |
| tmp |= (1<<9) | (1<<13); |
| MCHBAR32(0x1400) = tmp; |
| |
| tmp = MCHBAR32(0x140c); |
| tmp &= ~(0xff | (1<<11) | (1<<12) | |
| (1<<16) | (1<<18) | (1<<27) | (0xf<<28)); |
| tmp |= (1<<7) | (1<<11) | (1<<16); |
| switch (ddr3clock) { |
| case MEM_CLOCK_667MT: |
| tmp |= 9 << 28; |
| break; |
| case MEM_CLOCK_800MT: |
| tmp |= 7 << 28; |
| break; |
| case MEM_CLOCK_1067MT: |
| tmp |= 8 << 28; |
| break; |
| } |
| MCHBAR32(0x140c) = tmp; |
| |
| MCHBAR32(0x1440) &= ~1; |
| |
| tmp = MCHBAR32(0x1414); |
| tmp &= ~((1<<20) | (7<<11) | (0xf << 24) | (0xf << 16)); |
| tmp |= (3<<11); |
| switch (ddr3clock) { |
| case MEM_CLOCK_667MT: |
| tmp |= (2 << 24) | (10 << 16); |
| break; |
| case MEM_CLOCK_800MT: |
| tmp |= (3 << 24) | (7 << 16); |
| break; |
| case MEM_CLOCK_1067MT: |
| tmp |= (4 << 24) | (4 << 16); |
| break; |
| } |
| MCHBAR32(0x1414) = tmp; |
| |
| MCHBAR32(0x1418) &= ~((1<<3) | (1<<11) | (1<<19) | (1<<27)); |
| |
| MCHBAR32(0x141c) &= ~((1<<3) | (1<<11) | (1<<19) | (1<<27)); |
| |
| MCHBAR32(0x1428) |= 1<<14; |
| |
| tmp = MCHBAR32(0x142c); |
| tmp &= ~((0xf << 8) | (0x7 << 20) | 0xf | (0xf << 24)); |
| tmp |= (0x3 << 20) | (5 << 24); |
| switch (ddr3clock) { |
| case MEM_CLOCK_667MT: |
| tmp |= (2 << 8) | 0xc; |
| break; |
| case MEM_CLOCK_800MT: |
| tmp |= (3 << 8) | 0xa; |
| break; |
| case MEM_CLOCK_1067MT: |
| tmp |= (4 << 8) | 0x7; |
| break; |
| } |
| MCHBAR32(0x142c) = tmp; |
| |
| tmp = MCHBAR32(0x400); |
| tmp &= ~((3 << 4) | (3 << 16) | (3 << 30)); |
| tmp |= (2 << 4) | (2 << 16); |
| MCHBAR32(0x400) = tmp; |
| |
| MCHBAR32(0x404) &= ~(0xf << 20); |
| |
| MCHBAR32(0x40c) &= ~(1 << 6); |
| |
| tmp = MCHBAR32(0x410); |
| tmp &= ~(7 << 28); |
| tmp |= 2 << 28; |
| MCHBAR32(0x410) = tmp; |
| |
| tmp = MCHBAR32(0x41c); |
| tmp &= ~0x77; |
| tmp |= 0x11; |
| MCHBAR32(0x41c) = tmp; |
| |
| ddr3_select_clock_mux(ddr3clock, dimms, stepping); |
| |
| ddr3_write_io_init(ddr3clock, dimms, stepping, sff); |
| |
| ddr3_read_io_init(ddr3clock, dimms, sff); |
| } |
| |
| static void jedec_init(const timings_t *const timings, |
| const dimminfo_t *const dimms) |
| { |
| if ((timings->tWR < 5) || (timings->tWR > 12)) |
| die("tWR value unsupported in Jedec initialization.\n"); |
| |
| /* Pre-jedec settings */ |
| MCHBAR32(0x40) |= (1 << 1); |
| MCHBAR32(0x230) |= (3 << 1); |
| MCHBAR32(0x238) |= (3 << 24); |
| MCHBAR32(0x23c) |= (3 << 24); |
| |
| /* Normal write pointer operation */ |
| MCHBAR32(0x14f0) |= (1 << 9); |
| MCHBAR32(0x15f0) |= (1 << 9); |
| |
| MCHBAR32(DCC_MCHBAR) = (MCHBAR32(DCC_MCHBAR) & ~DCC_CMD_MASK) | DCC_CMD_NOP; |
| |
| u8 reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xf0); |
| pci_write_config8(PCI_DEV(0, 0, 0), 0xf0, reg8 & ~(1 << 2)); |
| reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xf0); |
| pci_write_config8(PCI_DEV(0, 0, 0), 0xf0, reg8 | (1 << 2)); |
| udelay(2); |
| |
| /* 5 6 7 8 9 10 11 12 */ |
| static const u8 wr_lut[] = { 1, 2, 3, 4, 5, 5, 6, 6 }; |
| |
| const int WL = ((timings->tWL - 5) & 7) << 6; |
| const int ODT_120OHMS = (1 << 9); |
| const int ODS_34OHMS = (1 << 4); |
| const int WR = (wr_lut[timings->tWR - 5] & 7) << 12; |
| const int DLL1 = 1 << 11; |
| const int CAS = ((timings->CAS - 4) & 7) << 7; |
| const int INTERLEAVED = 1 << 6;/* This is READ Burst Type == interleaved. */ |
| |
| int ch, r; |
| FOR_EACH_POPULATED_RANK(dimms, ch, r) { |
| /* We won't do this in dual-interleaved mode, |
| so don't care about the offset. */ |
| const u32 rankaddr = raminit_get_rank_addr(ch, r); |
| printk(BIOS_DEBUG, "JEDEC init @0x%08x\n", rankaddr); |
| MCHBAR32(DCC_MCHBAR) = (MCHBAR32(DCC_MCHBAR) & ~DCC_SET_EREG_MASK) | DCC_SET_EREGx(2); |
| read32((u32 *)(rankaddr | WL)); |
| MCHBAR32(DCC_MCHBAR) = (MCHBAR32(DCC_MCHBAR) & ~DCC_SET_EREG_MASK) | DCC_SET_EREGx(3); |
| read32((u32 *)rankaddr); |
| MCHBAR32(DCC_MCHBAR) = (MCHBAR32(DCC_MCHBAR) & ~DCC_SET_EREG_MASK) | DCC_SET_EREGx(1); |
| read32((u32 *)(rankaddr | ODT_120OHMS | ODS_34OHMS)); |
| MCHBAR32(DCC_MCHBAR) = (MCHBAR32(DCC_MCHBAR) & ~DCC_CMD_MASK) | DCC_SET_MREG; |
| read32((u32 *)(rankaddr | WR | DLL1 | CAS | INTERLEAVED)); |
| MCHBAR32(DCC_MCHBAR) = (MCHBAR32(DCC_MCHBAR) & ~DCC_CMD_MASK) | DCC_SET_MREG; |
| read32((u32 *)(rankaddr | WR | CAS | INTERLEAVED)); |
| } |
| } |
| |
| static void ddr3_calibrate_zq(void) { |
| udelay(2); |
| |
| u32 tmp = MCHBAR32(DCC_MCHBAR); |
| tmp &= ~(7 << 16); |
| tmp |= (5 << 16); /* ZQ calibration mode */ |
| MCHBAR32(DCC_MCHBAR) = tmp; |
| |
| MCHBAR32(CxDRT6_MCHBAR(0)) |= (1 << 3); |
| MCHBAR32(CxDRT6_MCHBAR(1)) |= (1 << 3); |
| |
| udelay(1); |
| |
| MCHBAR32(CxDRT6_MCHBAR(0)) &= ~(1 << 3); |
| MCHBAR32(CxDRT6_MCHBAR(1)) &= ~(1 << 3); |
| |
| MCHBAR32(DCC_MCHBAR) |= (7 << 16); /* Normal operation */ |
| } |
| |
| static void post_jedec_sequence(const int cores) { |
| const int quadcore = cores == 4; |
| |
| MCHBAR32(0x0040) &= ~(1 << 1); |
| MCHBAR32(0x0230) &= ~(3 << 1); |
| MCHBAR32(0x0230) |= 1 << 15; |
| MCHBAR32(0x0230) &= ~(1 << 19); |
| MCHBAR32(0x1250) = 0x6c4; |
| MCHBAR32(0x1350) = 0x6c4; |
| MCHBAR32(0x1254) = 0x871a066d; |
| MCHBAR32(0x1354) = 0x871a066d; |
| MCHBAR32(0x0238) |= 1 << 26; |
| MCHBAR32(0x0238) &= ~(3 << 24); |
| MCHBAR32(0x0238) |= 1 << 23; |
| MCHBAR32(0x0238) = (MCHBAR32(0x238) & ~(7 << 20)) | (3 << 20); |
| MCHBAR32(0x0238) = (MCHBAR32(0x238) & ~(7 << 17)) | (6 << 17); |
| MCHBAR32(0x0238) = (MCHBAR32(0x238) & ~(7 << 14)) | (6 << 14); |
| MCHBAR32(0x0238) = (MCHBAR32(0x238) & ~(7 << 11)) | (6 << 11); |
| MCHBAR32(0x0238) = (MCHBAR32(0x238) & ~(7 << 8)) | (6 << 8); |
| MCHBAR32(0x023c) &= ~(3 << 24); |
| MCHBAR32(0x023c) &= ~(1 << 23); |
| MCHBAR32(0x023c) = (MCHBAR32(0x23c) & ~(7 << 20)) | (3 << 20); |
| MCHBAR32(0x023c) = (MCHBAR32(0x23c) & ~(7 << 17)) | (6 << 17); |
| MCHBAR32(0x023c) = (MCHBAR32(0x23c) & ~(7 << 14)) | (6 << 14); |
| MCHBAR32(0x023c) = (MCHBAR32(0x23c) & ~(7 << 11)) | (6 << 11); |
| MCHBAR32(0x023c) = (MCHBAR32(0x23c) & ~(7 << 8)) | (6 << 8); |
| |
| if (quadcore) { |
| MCHBAR32(0xb14) |= (0xbfbf << 16); |
| } |
| } |
| |
| static void dram_optimizations(const timings_t *const timings, |
| const dimminfo_t *const dimms) |
| { |
| int ch; |
| |
| FOR_EACH_POPULATED_CHANNEL(dimms, ch) { |
| const unsigned int mchbar = CxDRC1_MCHBAR(ch); |
| u32 cxdrc1 = MCHBAR32(mchbar); |
| cxdrc1 &= ~CxDRC1_SSDS_MASK; |
| if (dimms[ch].ranks == 1) |
| cxdrc1 |= CxDRC1_SS; |
| else |
| cxdrc1 |= CxDRC1_DS; |
| MCHBAR32(mchbar) = cxdrc1; |
| } |
| } |
| |
| u32 raminit_get_rank_addr(unsigned int channel, unsigned int rank) |
| { |
| if (!channel && !rank) |
| return 0; /* Address of first rank */ |
| |
| /* Read the bound of the previous rank. */ |
| if (rank > 0) { |
| rank--; |
| } else { |
| rank = 3; /* Highest rank per channel */ |
| channel--; |
| } |
| const u32 reg = MCHBAR32(CxDRBy_MCHBAR(channel, rank)); |
| /* Bound is in 32MB. */ |
| return ((reg & CxDRBy_BOUND_MASK(rank)) >> CxDRBy_BOUND_SHIFT(rank)) << 25; |
| } |
| |
| void raminit_reset_readwrite_pointers(void) { |
| MCHBAR32(0x1234) |= (1 << 6); |
| MCHBAR32(0x1234) &= ~(1 << 6); |
| MCHBAR32(0x1334) |= (1 << 6); |
| MCHBAR32(0x1334) &= ~(1 << 6); |
| MCHBAR32(0x14f0) &= ~(1 << 9); |
| MCHBAR32(0x14f0) |= (1 << 9); |
| MCHBAR32(0x14f0) |= (1 << 10); |
| MCHBAR32(0x15f0) &= ~(1 << 9); |
| MCHBAR32(0x15f0) |= (1 << 9); |
| MCHBAR32(0x15f0) |= (1 << 10); |
| } |
| |
| void raminit(sysinfo_t *const sysinfo, const int s3resume) |
| { |
| const dimminfo_t *const dimms = sysinfo->dimms; |
| const timings_t *const timings = &sysinfo->selected_timings; |
| |
| int ch; |
| u8 reg8; |
| |
| timestamp_add_now(TS_BEFORE_INITRAM); |
| |
| /* Wait for some bit, maybe TXT clear. */ |
| if (sysinfo->txt_enabled) { |
| while (!(read8((u8 *)0xfed40000) & (1 << 7))) {} |
| } |
| |
| /* Enable SMBUS. */ |
| enable_smbus(); |
| |
| /* Collect information about DIMMs and find common settings. */ |
| collect_dimm_config(sysinfo); |
| |
| /* Check for bad warm boot. */ |
| reset_on_bad_warmboot(); |
| |
| |
| /***** From now on, program according to collected infos: *****/ |
| |
| /* Program DRAM type. */ |
| switch (sysinfo->spd_type) { |
| case DDR2: |
| MCHBAR8(0x1434) |= (1 << 7); |
| break; |
| case DDR3: |
| MCHBAR8(0x1434) |= (3 << 0); |
| break; |
| } |
| |
| /* Program system memory frequency. */ |
| set_system_memory_frequency(timings); |
| /* Program IGD memory frequency. */ |
| set_igd_memory_frequencies(sysinfo); |
| |
| /* Configure DRAM control mode for populated channels. */ |
| configure_dram_control_mode(timings, dimms); |
| |
| /* Initialize RCOMP. */ |
| rcomp_initialization(sysinfo->stepping, sysinfo->sff); |
| |
| /* Power-up DRAM. */ |
| dram_powerup(s3resume); |
| /* Program DRAM timings. */ |
| dram_program_timings(timings); |
| /* Program number of banks. */ |
| dram_program_banks(dimms); |
| /* Enable DRAM clock pairs for populated DIMMs. */ |
| FOR_EACH_POPULATED_CHANNEL(dimms, ch) |
| MCHBAR32(CxDCLKDIS_MCHBAR(ch)) |= CxDCLKDIS_ENABLE; |
| |
| /* Enable On-Die Termination. */ |
| odt_setup(timings, sysinfo->sff); |
| /* Miscellaneous settings. */ |
| misc_settings(timings, sysinfo->stepping); |
| /* Program clock crossing registers. */ |
| clock_crossing_setup(timings->fsb_clock, timings->mem_clock, dimms); |
| /* Program egress VC1 timings. */ |
| vc1_program_timings(timings->fsb_clock); |
| /* Perform system-memory i/o initialization. */ |
| memory_io_init(timings->mem_clock, dimms, |
| sysinfo->stepping, sysinfo->sff); |
| |
| /* Initialize memory map with dummy values of 128MB per rank with a |
| page size of 4KB. This makes the JEDEC initialization code easier. */ |
| prejedec_memory_map(dimms, timings->channel_mode); |
| if (!s3resume) |
| /* Perform JEDEC initialization of DIMMS. */ |
| jedec_init(timings, dimms); |
| /* Some programming steps after JEDEC initialization. */ |
| post_jedec_sequence(sysinfo->cores); |
| |
| /* Announce normal operation, initialization completed. */ |
| MCHBAR32(DCC_MCHBAR) |= (0x7 << 16) | (0x1 << 19); |
| reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xf0); |
| pci_write_config8(PCI_DEV(0, 0, 0), 0xf0, reg8 | (1 << 2)); |
| reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xf0); |
| pci_write_config8(PCI_DEV(0, 0, 0), 0xf0, reg8 & ~(1 << 2)); |
| |
| |
| /* Take a breath (the reader). */ |
| |
| |
| /* Perform ZQ calibration for DDR3. */ |
| ddr3_calibrate_zq(); |
| |
| /* Perform receive-enable calibration. */ |
| raminit_receive_enable_calibration(timings, dimms); |
| /* Lend clock values from receive-enable calibration. */ |
| MCHBAR32(CxDRT5_MCHBAR(0)) = |
| (MCHBAR32(CxDRT5_MCHBAR(0)) & ~(0xf0)) | |
| ((((MCHBAR32(CxDRT3_MCHBAR(0)) >> 7) - 1) & 0xf) << 4); |
| MCHBAR32(CxDRT5_MCHBAR(1)) = |
| (MCHBAR32(CxDRT5_MCHBAR(1)) & ~(0xf0)) | |
| ((((MCHBAR32(CxDRT3_MCHBAR(1)) >> 7) - 1) & 0xf) << 4); |
| |
| /* Perform read/write training for high clock rate. */ |
| if (timings->mem_clock == MEM_CLOCK_1067MT) { |
| raminit_read_training(dimms, s3resume); |
| raminit_write_training(timings->mem_clock, dimms, s3resume); |
| } |
| |
| igd_compute_ggc(sysinfo); |
| |
| /* Program final memory map (with real values). */ |
| program_memory_map(dimms, timings->channel_mode, 0, sysinfo->ggc); |
| |
| /* Some last optimizations. */ |
| dram_optimizations(timings, dimms); |
| |
| /* Mark raminit being finished. :-) */ |
| u8 tmp8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2) & ~(1 << 7); |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, tmp8); |
| |
| raminit_thermal(sysinfo); |
| init_igd(sysinfo); |
| |
| timestamp_add_now(TS_AFTER_INITRAM); |
| } |