| chip northbridge/intel/sandybridge |
| |
| # Enable DisplayPort 1 Hotplug with 6ms pulse |
| register "gpu_dp_d_hotplug" = "0x06" |
| |
| # Enable DisplayPort 0 Hotplug with 6ms pulse |
| register "gpu_dp_c_hotplug" = "0x06" |
| |
| # Enable DVI Hotplug with 6ms pulse |
| register "gpu_dp_b_hotplug" = "0x06" |
| |
| register "max_mem_clock_mhz" = "666" |
| |
| chip cpu/intel/model_206ax |
| device cpu_cluster 0 on end |
| |
| register "acpi_c1" = "CPU_ACPI_C3" |
| register "acpi_c2" = "CPU_ACPI_C6" |
| end |
| |
| device domain 0 on |
| subsystemid 0x1ae0 0xc000 inherit |
| device pci 00.0 on end # host bridge |
| device pci 02.0 on end # vga controller |
| |
| chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH |
| # GPI routing |
| # 0 No effect (default) |
| # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) |
| # 2 SCI (if corresponding GPIO_EN bit is also set) |
| register "gpi1_routing" = "0" |
| register "gpi14_routing" = "2" |
| |
| register "sata_port_map" = "0x3" |
| |
| register "gen1_dec" = "0x00fc1601" |
| # SuperIO range is 0x700-0x73f |
| register "gen2_dec" = "0x003c0701" |
| |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT |
| device pci 19.0 off end # Intel Gigabit Ethernet |
| device pci 1a.0 on end # USB2 EHCI #2 |
| device pci 1b.0 on end # High Definition Audio |
| device pci 1c.0 on end # PCIe Port #1 (WLAN) |
| device pci 1c.1 off end # PCIe Port #2 |
| device pci 1c.2 on end # PCIe Port #3 (Debug) |
| device pci 1c.3 on end # PCIe Port #4 (LAN) |
| device pci 1c.4 off end # PCIe Port #5 |
| device pci 1c.5 off end # PCIe Port #6 |
| device pci 1c.6 off end # PCIe Port #7 |
| device pci 1c.7 off end # PCIe Port #8 |
| device pci 1d.0 on end # USB2 EHCI #1 |
| device pci 1e.0 off end # PCI bridge |
| device pci 1f.0 on # LPC bridge |
| chip superio/ite/it8772f |
| # Enable GPIO10 as USBPWRON12# |
| # Enable GPIO12 as USBPWRON13# |
| register "gpio_set1" = "0x05" |
| # Enable GPIO22 as SIO_WAEKSCI# |
| register "gpio_set2" = "0x04" |
| # Enable GPIO32 as SIO_EXTSMI# |
| register "gpio_set3" = "0x04" |
| # Enable GPIO45 as LED_POWER# |
| register "gpio_set4" = "0x20" |
| # Enable GPIO51 as USBPWRON8# |
| # Enable GPIO52 as USBPWRON1# |
| register "gpio_set5" = "0x06" |
| # Skip keyboard init |
| register "skip_keyboard" = "1" |
| # Enable PECI on TMPIN3 |
| register "peci_tmpin" = "3" |
| # Enable FAN3 |
| register "fan3_enable" = "1" |
| |
| device pnp 2e.0 off end # FDC |
| device pnp 2e.1 on # Serial Port 1 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.4 on # Environment Controller |
| io 0x60 = 0x700 |
| io 0x62 = 0x710 |
| end |
| device pnp 2e.7 on # GPIO |
| io 0x60 = 0x720 |
| io 0x62 = 0x730 |
| end |
| device pnp 2e.5 on |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| end # Keyboard |
| device pnp 2e.6 on |
| irq 0x70 = 12 |
| end # Mouse |
| device pnp 2e.a off end # IR |
| end |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| end |
| device pci 1f.2 on end # SATA Controller 1 |
| device pci 1f.3 on end # SMBus |
| device pci 1f.5 off end # SATA Controller 2 |
| device pci 1f.6 on end # Thermal |
| end |
| end |
| end |