| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| #include <acpi/acpi.h> |
| #include <bootstate.h> |
| #include <cbfs.h> |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <fsp/api.h> |
| #include <fsp/util.h> |
| #include <intelblocks/fast_spi.h> |
| #include <soc/iomap.h> |
| #include <soc/intel/common/vbt.h> |
| #include <soc/pci_devs.h> |
| #include <soc/ramstage.h> |
| #include <soc/fiamux.h> |
| #include <spi-generic.h> |
| #include <soc/hob_mem.h> |
| |
| static struct device_operations pci_domain_ops = { |
| .read_resources = &pci_domain_read_resources, |
| .set_resources = &pci_domain_set_resources, |
| .scan_bus = &pci_domain_scan_bus, |
| }; |
| |
| static struct device_operations cpu_bus_ops = { |
| .read_resources = noop_read_resources, |
| .set_resources = noop_set_resources, |
| .init = denverton_init_cpus, |
| #if CONFIG(HAVE_ACPI_TABLES) |
| .acpi_fill_ssdt = generate_cpu_entries, |
| #endif |
| }; |
| |
| static void soc_enable_dev(struct device *dev) |
| { |
| /* Set the operations if it is a special bus type */ |
| if (dev->path.type == DEVICE_PATH_DOMAIN) |
| dev->ops = &pci_domain_ops; |
| else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) |
| dev->ops = &cpu_bus_ops; |
| } |
| |
| static void soc_init(void *data) |
| { |
| fsp_silicon_init(); |
| soc_save_dimm_info(); |
| } |
| |
| static void soc_final(void *data) {} |
| |
| static void soc_silicon_init_params(FSPS_UPD *silupd) |
| { |
| size_t num; |
| uint16_t supported_hsio_lanes; |
| BL_HSIO_INFORMATION *hsio_config; |
| BL_FIA_MUX_CONFIG_HOB *fiamux_hob_data = get_fiamux_hob_data(); |
| |
| /* Configure FIA MUX PCD */ |
| supported_hsio_lanes = |
| (uint16_t)fiamux_hob_data->FiaMuxConfig.SkuNumLanesAllowed; |
| |
| num = mainboard_get_hsio_config(&hsio_config); |
| |
| if (get_fiamux_hsio_info(supported_hsio_lanes, num, &hsio_config)) |
| die("HSIO Configuration is invalid, please correct it!"); |
| |
| /* Check the requested FIA MUX Configuration */ |
| if (!(&hsio_config->FiaConfig)) { |
| die("Requested FIA MUX Configuration is invalid," |
| " please correct it!"); |
| } |
| |
| /* Initialize PCIE Bifurcation & HSIO configuration */ |
| silupd->FspsConfig.PcdBifurcationPcie0 = hsio_config->PcieBifCtr[0]; |
| silupd->FspsConfig.PcdBifurcationPcie1 = hsio_config->PcieBifCtr[1]; |
| |
| silupd->FspsConfig.PcdFiaMuxConfigRequestPtr = |
| (uint32_t)&hsio_config->FiaConfig; |
| } |
| |
| void platform_fsp_silicon_init_params_cb(FSPS_UPD *silupd) |
| { |
| const struct microcode *microcode_file; |
| size_t microcode_len; |
| |
| microcode_file = cbfs_map("cpu_microcode_blob.bin", µcode_len); |
| |
| if ((microcode_file != NULL) && (microcode_len != 0)) { |
| /* Update CPU Microcode patch base address/size */ |
| silupd->FspsConfig.PcdCpuMicrocodePatchBase = |
| (uint32_t)microcode_file; |
| silupd->FspsConfig.PcdCpuMicrocodePatchSize = |
| (uint32_t)microcode_len; |
| } |
| |
| soc_silicon_init_params(silupd); |
| mainboard_silicon_init_params(silupd); |
| } |
| |
| struct chip_operations soc_intel_denverton_ns_ops = { |
| CHIP_NAME("Intel Denverton-NS SOC") |
| .enable_dev = soc_enable_dev, |
| .init = soc_init, |
| .final = soc_final |
| }; |
| |
| struct pci_operations soc_pci_ops = { |
| .set_subsystem = pci_dev_set_subsystem, |
| }; |
| |
| /* |
| * spi_flash init() needs to run unconditionally on every boot (including |
| * resume) to allow write protect to be disabled for eventlog and nvram |
| * updates. This needs to be done as early as possible in ramstage. Thus, add a |
| * callback for entry into BS_PRE_DEVICE. |
| */ |
| static void spi_flash_init_cb(void *unused) |
| { |
| fast_spi_init(); |
| } |
| |
| BOOT_STATE_INIT_ENTRY(BS_PRE_DEVICE, BS_ON_ENTRY, spi_flash_init_cb, NULL); |