| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> |
| * Copyright (C) 2011 Alexandru Gagniuc <mr.nuke.me@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <console/console.h> |
| #include <cpu/x86/msr.h> |
| #include <cpu/amd/mtrr.h> |
| #include <pc80/mc146818rtc.h> |
| #include <bitops.h> |
| #include "k8x8xx.h" |
| |
| static void dram_enable(struct device *dev) |
| { |
| u16 reg; |
| struct k8x8xx_vt8237_mirrored_regs mregs; |
| |
| k8x8xx_vt8237_mirrored_regs_fill(&mregs); |
| /* |
| * Enable Lowest Interrupt arbitration for APIC, enable NB APIC |
| * decoding, MSI support, no SMRAM, compatible SMM. |
| */ |
| pci_write_config8(dev, 0x86, mregs.smm_apic_decoding); |
| |
| /* |
| * We want to use the 0xC0000-0xEFFFF as RAM mark area as RW, even if |
| * memory is doing K8 the DMA from SB will fail if we have it wrong, |
| * AND even we have it here, we must later copy it to SB to make it work :/ |
| */ |
| |
| /* For CC000-CFFFF, bits 7:6 (10 = REn, 01 = WEn) bits 1:0 for |
| * C0000-C3FFF etc. |
| */ |
| pci_write_config8(dev, 0x80, mregs.rom_shadow_ctrl_pg_c); |
| /* For page D0000-DFFFF */ |
| pci_write_config8(dev, 0x81, mregs.rom_shadow_ctrl_pg_d); |
| /* For page E0000-EFFFF */ |
| pci_write_config8(dev, 0x82, mregs.rom_shadow_ctrl_pg_e_memhole_smi_decoding); |
| pci_write_config8(dev, 0x83, mregs.rom_shadow_ctrl_pg_f_memhole); |
| |
| reg = pci_read_config16(dev, 0x84); |
| reg &= 0xf; |
| pci_write_config16(dev, 0x84, mregs.low_top_address | reg); |
| |
| reg = pci_read_config16(dev, 0x88); |
| reg &= 0xf800; |
| |
| /* The Address Next to the Last Valid DRAM Address */ |
| pci_write_config16(dev, 0x88, reg | mregs.shadow_mem_ctrl); |
| |
| print_debug(" VIA_X_3 device dump:\n"); |
| dump_south(dev); |
| |
| } |
| |
| static void dram_enable_k8m890(struct device *dev) |
| { |
| #if CONFIG_GFXUMA |
| msr_t msr; |
| int ret; |
| unsigned int fbbits; |
| |
| /* use CMOS */ |
| if (CONFIG_VIDEO_MB == -1) { |
| ret = get_option(&fbbits, "videoram_size"); |
| if (ret) { |
| printk(BIOS_WARNING, "Failed to get videoram size (error %d), using default.\n", ret); |
| fbbits = 5; |
| } |
| |
| if ((fbbits < 1) || (fbbits > 7)) { |
| printk(BIOS_WARNING, "Invalid videoram size (%d), using default.\n", |
| 4 << fbbits); |
| fbbits = 5; |
| } |
| uma_memory_size = 4 << (fbbits + 20); |
| } else { |
| uma_memory_size = (CONFIG_VIDEO_MB << 20); |
| } |
| |
| msr = rdmsr(TOP_MEM); |
| uma_memory_base = msr.lo - uma_memory_size; |
| printk(BIOS_INFO, "K8M890: UMA base is %llx size is %u (MB)\n", uma_memory_base, |
| (u32) (uma_memory_size / 1024 / 1024)); |
| /* enable VGA, so the bridges gets VGA_EN and resources are set */ |
| pci_write_config8(dev, 0xa1, 0x80); |
| #endif |
| dram_enable(dev); |
| } |
| |
| int |
| k8m890_host_fb_size_get(void) |
| { |
| struct device *dev = dev_find_device(PCI_VENDOR_ID_VIA, |
| PCI_DEVICE_ID_VIA_K8M800_DRAM, 0); |
| if(!dev) dev = dev_find_device(PCI_VENDOR_ID_VIA, |
| PCI_DEVICE_ID_VIA_K8M890CE_3, 0); |
| unsigned char tmp; |
| |
| tmp = pci_read_config8(dev, 0xA1); |
| tmp >>= 4; |
| if (tmp & 0x08) |
| return 4 << (tmp & 7); |
| else |
| return 0; |
| } |
| |
| static void dram_init_fb(struct device *dev) |
| { |
| #if CONFIG_GFXUMA |
| /* Important bits: |
| * Enable the internal GFX bit 7 of reg 0xa1 plus in same reg: |
| * bits 6:4 X fbuffer size will be 2^(X+2) or 100 = 64MB, 101 = 128MB |
| * bits 3:0 BASE [31:28] |
| * reg 0xa0 bits 7:1 BASE [27:21] bit0 enable CPU access |
| */ |
| unsigned int fbbits = 0; |
| u8 tmp; |
| |
| fbbits = ((log2(uma_memory_size >> 20) - 2) << 4); |
| printk(BIOS_INFO, "K8M890: Using a %dMB framebuffer.\n", (unsigned int) (uma_memory_size >> 20)); |
| |
| /* Step 1: enable UMA but no FB */ |
| pci_write_config8(dev, 0xa1, 0x80); |
| |
| /* Step 2: enough is just the FB size, the CPU accessible address is not needed */ |
| tmp = fbbits | 0x80; |
| pci_write_config8(dev, 0xa1, tmp); |
| |
| /* TODO K8 needs some UMA fine tuning too maybe call some generic routine here? */ |
| #endif |
| } |
| |
| static struct pci_operations lops_pci = { |
| .set_subsystem = pci_dev_set_subsystem, |
| }; |
| |
| static const struct device_operations dram_ops_t = { |
| .read_resources = pci_dev_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .enable = dram_enable, |
| .ops_pci = &lops_pci, |
| }; |
| |
| static const struct device_operations dram_ops_m = { |
| .read_resources = pci_dev_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .enable = dram_enable_k8m890, |
| .init = dram_init_fb, |
| .ops_pci = &lops_pci, |
| }; |
| |
| static const struct pci_driver northbridge_driver_t800 __pci_driver = { |
| .ops = &dram_ops_t, |
| .vendor = PCI_VENDOR_ID_VIA, |
| .device = PCI_DEVICE_ID_VIA_K8T800_DRAM, |
| }; |
| |
| static const struct pci_driver northbridge_driver_m800 __pci_driver = { |
| .ops = &dram_ops_m, |
| .vendor = PCI_VENDOR_ID_VIA, |
| .device = PCI_DEVICE_ID_VIA_K8M800_DRAM, |
| }; |
| |
| static const struct pci_driver northbridge_driver_t890 __pci_driver = { |
| .ops = &dram_ops_t, |
| .vendor = PCI_VENDOR_ID_VIA, |
| .device = PCI_DEVICE_ID_VIA_K8T890CE_3, |
| }; |
| |
| static const struct pci_driver northbridge_driver_t890cf __pci_driver = { |
| .ops = &dram_ops_t, |
| .vendor = PCI_VENDOR_ID_VIA, |
| .device = PCI_DEVICE_ID_VIA_K8T890CF_3, |
| }; |
| |
| static const struct pci_driver northbridge_driver_m890 __pci_driver = { |
| .ops = &dram_ops_m, |
| .vendor = PCI_VENDOR_ID_VIA, |
| .device = PCI_DEVICE_ID_VIA_K8M890CE_3, |
| }; |