| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2015-2016 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| |
| #include <arch/io.h> |
| #include <arch/acpi.h> |
| #include <arch/acpigen.h> |
| #include <cbmem.h> |
| #include <chip.h> |
| #include <console/console.h> |
| #include <cpu/amd/mtrr.h> |
| #include <cpu/cpu.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <device/hypertransport.h> |
| #include <lib.h> |
| #include <agesawrapper.h> |
| #include <agesawrapper_call.h> |
| #include <soc/northbridge.h> |
| #include <soc/pci_devs.h> |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| /* |
| * AMD vendorcode files. Place at the end so coreboot defaults and maintained |
| * and not set by vendorcode |
| */ |
| #include <AGESA.h> |
| #include <FieldAccessors.h> |
| #include <Porting.h> |
| #include <Topology.h> |
| |
| #if IS_ENABLED(CONFIG_EXT_CONF_SUPPORT) |
| #error CONFIG_EXT_CONF_SUPPORT == 1 not support anymore! |
| #endif |
| |
| typedef struct dram_base_mask { |
| u32 base; /* [47:27] at [28:8] */ |
| u32 mask; /* [47:27] at [28:8] and enable at bit 0 */ |
| } dram_base_mask_t; |
| |
| static dram_base_mask_t get_dram_base_mask(void) |
| { |
| device_t dev = dev_find_slot(0, ADDR_DEVFN); |
| dram_base_mask_t d; |
| u32 temp; |
| |
| /* [39:24] at [31:16] */ |
| temp = pci_read_config32(dev, 0x44); |
| |
| /* mask out DramMask [26:24] too */ |
| d.mask = ((temp & 0xfff80000) >> (8 + 3)); |
| |
| /* [47:40] at [7:0] */ |
| temp = pci_read_config32(dev, 0x144) & 0xff; |
| d.mask |= temp << 21; |
| |
| temp = pci_read_config32(dev, 0x40); |
| d.mask |= (temp & 1); /* enable bit */ |
| d.base = ((temp & 0xfff80000) >> (8 + 3)); |
| temp = pci_read_config32(dev, 0x140) & 0xff; |
| d.base |= temp << 21; |
| return d; |
| } |
| |
| static void set_io_addr_reg(device_t dev, u32 nodeid, u32 linkn, u32 reg, |
| u32 io_min, u32 io_max) |
| { |
| u32 tempreg; |
| device_t addr_map = dev_find_slot(0, ADDR_DEVFN); |
| |
| /* io range allocation. Limit */ |
| tempreg = (nodeid & 0xf) | ((nodeid & 0x30) << (8 - 4)) | (linkn << 4) |
| | ((io_max & 0xf0) << (12 - 4)); |
| pci_write_config32(addr_map, reg + 4, tempreg); |
| tempreg = 3 | ((io_min & 0xf0) << (12 - 4)); /* base: ISA and VGA ? */ |
| pci_write_config32(addr_map, reg, tempreg); |
| } |
| |
| static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index, |
| u32 mmio_min, u32 mmio_max) |
| { |
| u32 tempreg; |
| device_t addr_map = dev_find_slot(0, ADDR_DEVFN); |
| |
| /* io range allocation. Limit */ |
| tempreg = (nodeid & 0xf) | (linkn << 4) | (mmio_max & 0xffffff00); |
| pci_write_config32(addr_map, reg + 4, tempreg); |
| tempreg = 3 | (nodeid & 0x30) | (mmio_min & 0xffffff00); |
| pci_write_config32(addr_map, reg, tempreg); |
| } |
| |
| static void read_resources(device_t dev) |
| { |
| /* |
| * This MMCONF resource must be reserved in the PCI domain. |
| * It is not honored by the coreboot resource allocator if it is in |
| * the CPU_CLUSTER. |
| */ |
| mmconf_resource(dev, 0xc0010058); |
| } |
| |
| static void set_resource(device_t dev, struct resource *resource, u32 nodeid) |
| { |
| resource_t rbase, rend; |
| unsigned int reg, link_num; |
| char buf[50]; |
| |
| /* Make certain the resource has actually been set */ |
| if (!(resource->flags & IORESOURCE_ASSIGNED)) |
| return; |
| |
| /* If I have already stored this resource don't worry about it */ |
| if (resource->flags & IORESOURCE_STORED) |
| return; |
| |
| /* Only handle PCI memory and IO resources */ |
| if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO))) |
| return; |
| |
| /* Ensure I am actually looking at a resource of function 1 */ |
| if ((resource->index & 0xffff) < 0x1000) |
| return; |
| |
| /* Get the base address */ |
| rbase = resource->base; |
| |
| /* Get the limit (rounded up) */ |
| rend = resource_end(resource); |
| |
| /* Get the register and link */ |
| reg = resource->index & 0xfff; /* 4k */ |
| link_num = IOINDEX_LINK(resource->index); |
| |
| if (resource->flags & IORESOURCE_IO) |
| set_io_addr_reg(dev, nodeid, link_num, reg, rbase>>8, rend>>8); |
| else if (resource->flags & IORESOURCE_MEM) |
| set_mmio_addr_reg(nodeid, link_num, reg, |
| (resource->index >> 24), rbase >> 8, rend >> 8); |
| |
| resource->flags |= IORESOURCE_STORED; |
| snprintf(buf, sizeof(buf), " <node %x link %x>", |
| nodeid, link_num); |
| report_resource_stored(dev, resource, buf); |
| } |
| |
| /** |
| * I tried to reuse the resource allocation code in set_resource() |
| * but it is too difficult to deal with the resource allocation magic. |
| */ |
| |
| static void create_vga_resource(device_t dev) |
| { |
| struct bus *link; |
| |
| /* find out which link the VGA card is connected, |
| * we only deal with the 'first' vga card */ |
| for (link = dev->link_list ; link ; link = link->next) |
| if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) |
| break; |
| |
| /* no VGA card installed */ |
| if (link == NULL) |
| return; |
| |
| printk(BIOS_DEBUG, "VGA: %s has VGA device\n", dev_path(dev)); |
| /* Route A0000-BFFFF, IO 3B0-3BB 3C0-3DF */ |
| pci_write_config32(dev_find_slot(0, ADDR_DEVFN), 0xf4, 1); |
| } |
| |
| static void set_resources(device_t dev) |
| { |
| struct bus *bus; |
| struct resource *res; |
| |
| |
| /* do we need this? */ |
| create_vga_resource(dev); |
| |
| /* Set each resource we have found */ |
| for (res = dev->resource_list ; res ; res = res->next) |
| set_resource(dev, res, 0); |
| |
| for (bus = dev->link_list ; bus ; bus = bus->next) |
| if (bus->children) |
| assign_resources(bus); |
| } |
| |
| static void northbridge_init(struct device *dev) |
| { |
| } |
| |
| static unsigned long acpi_fill_hest(acpi_hest_t *hest) |
| { |
| void *addr, *current; |
| |
| /* Skip the HEST header. */ |
| current = (void *)(hest + 1); |
| |
| addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); |
| if (addr != NULL) |
| current += acpi_create_hest_error_source(hest, current, 0, |
| (void *)((u32)addr + 2), *(UINT16 *)addr - 2); |
| |
| addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); |
| if (addr != NULL) |
| current += acpi_create_hest_error_source(hest, current, 1, |
| (void *)((u32)addr + 2), *(UINT16 *)addr - 2); |
| |
| return (unsigned long)current; |
| } |
| |
| static void northbridge_fill_ssdt_generator(device_t device) |
| { |
| msr_t msr; |
| char pscope[] = "\\_SB.PCI0"; |
| |
| acpigen_write_scope(pscope); |
| msr = rdmsr(TOP_MEM); |
| acpigen_write_name_dword("TOM1", msr.lo); |
| msr = rdmsr(TOP_MEM2); |
| /* |
| * Since XP only implements parts of ACPI 2.0, we can't use a qword |
| * here. |
| * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt |
| * slide 22ff. |
| * Shift value right by 20 bit to make it fit into 32bit, |
| * giving us 1MB granularity and a limit of almost 4Exabyte of memory. |
| */ |
| acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); |
| acpigen_pop_len(); |
| } |
| |
| static unsigned long agesa_write_acpi_tables(device_t device, |
| unsigned long current, |
| acpi_rsdp_t *rsdp) |
| { |
| acpi_srat_t *srat; |
| acpi_slit_t *slit; |
| acpi_header_t *ssdt; |
| acpi_header_t *alib; |
| acpi_header_t *ivrs; |
| acpi_hest_t *hest; |
| |
| /* HEST */ |
| current = ALIGN(current, 8); |
| hest = (acpi_hest_t *)current; |
| acpi_write_hest((void *)current, acpi_fill_hest); |
| acpi_add_table(rsdp, (void *)current); |
| current += ((acpi_header_t *)current)->length; |
| |
| current = ALIGN(current, 8); |
| printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); |
| ivrs = agesawrapper_getlateinitptr(PICK_IVRS); |
| if (ivrs != NULL) { |
| memcpy((void *)current, ivrs, ivrs->length); |
| ivrs = (acpi_header_t *)current; |
| current += ivrs->length; |
| acpi_add_table(rsdp, ivrs); |
| } else { |
| printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); |
| } |
| |
| /* SRAT */ |
| current = ALIGN(current, 8); |
| printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); |
| srat = (acpi_srat_t *)agesawrapper_getlateinitptr(PICK_SRAT); |
| if (srat != NULL) { |
| memcpy((void *)current, srat, srat->header.length); |
| srat = (acpi_srat_t *)current; |
| current += srat->header.length; |
| acpi_add_table(rsdp, srat); |
| } else { |
| printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); |
| } |
| |
| /* SLIT */ |
| current = ALIGN(current, 8); |
| printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); |
| slit = (acpi_slit_t *)agesawrapper_getlateinitptr(PICK_SLIT); |
| if (slit != NULL) { |
| memcpy((void *)current, slit, slit->header.length); |
| slit = (acpi_slit_t *)current; |
| current += slit->header.length; |
| acpi_add_table(rsdp, slit); |
| } else { |
| printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); |
| } |
| |
| /* ALIB */ |
| current = ALIGN(current, 16); |
| printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); |
| alib = (acpi_header_t *)agesawrapper_getlateinitptr(PICK_ALIB); |
| if (alib != NULL) { |
| memcpy((void *)current, alib, alib->length); |
| alib = (acpi_header_t *)current; |
| current += alib->length; |
| acpi_add_table(rsdp, (void *)alib); |
| } else { |
| printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL." |
| " Skipping.\n"); |
| } |
| |
| current = ALIGN(current, 16); |
| printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); |
| ssdt = (acpi_header_t *)agesawrapper_getlateinitptr(PICK_PSTATE); |
| if (ssdt != NULL) { |
| memcpy((void *)current, ssdt, ssdt->length); |
| ssdt = (acpi_header_t *)current; |
| current += ssdt->length; |
| } else { |
| printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); |
| } |
| acpi_add_table(rsdp, ssdt); |
| |
| printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); |
| return current; |
| } |
| |
| static struct device_operations northbridge_operations = { |
| .read_resources = read_resources, |
| .set_resources = set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .init = northbridge_init, |
| .acpi_fill_ssdt_generator = northbridge_fill_ssdt_generator, |
| .write_acpi_tables = agesa_write_acpi_tables, |
| .enable = 0, |
| .ops_pci = 0, |
| }; |
| |
| static const struct pci_driver family15_northbridge __pci_driver = { |
| .ops = &northbridge_operations, |
| .vendor = PCI_VENDOR_ID_AMD, |
| .device = PCI_DEVICE_ID_AMD_15H_MODEL_707F_NB_HT, |
| }; |
| |
| void fam15_finalize(void *chip_info) |
| { |
| device_t dev; |
| u32 value; |
| dev = dev_find_slot(0, PCI_DEVFN(0, 0)); /* clear IoapicSbFeatureEn */ |
| pci_write_config32(dev, 0xf8, 0); |
| pci_write_config32(dev, 0xfc, 5); /* TODO: move it to dsdt.asl */ |
| |
| /* disable No Snoop */ |
| dev = dev_find_slot(0, PCI_DEVFN(1, 1)); |
| value = pci_read_config32(dev, 0x60); |
| value &= ~(1 << 11); |
| pci_write_config32(dev, 0x60, value); |
| } |
| |
| void domain_read_resources(device_t dev) |
| { |
| unsigned int reg; |
| device_t addr_map = dev_find_slot(0, ADDR_DEVFN); |
| |
| /* Find the already assigned resource pairs */ |
| for (reg = 0x80 ; reg <= 0xd8 ; reg += 0x08) { |
| u32 base, limit; |
| base = pci_read_config32(addr_map, reg); |
| limit = pci_read_config32(addr_map, reg + 4); |
| /* Is this register allocated? */ |
| if ((base & 3) != 0) { |
| unsigned int nodeid, reg_link; |
| device_t reg_dev = dev_find_slot(0, HT_DEVFN); |
| if (reg < 0xc0) /* mmio */ |
| nodeid = (limit & 0xf) + (base & 0x30); |
| else /* io */ |
| nodeid = (limit & 0xf) + ((base >> 4) & 0x30); |
| |
| reg_link = (limit >> 4) & 7; |
| if (reg_dev) { |
| /* Reserve the resource */ |
| struct resource *res; |
| res = new_resource(reg_dev, |
| IOINDEX(0x1000 + reg, |
| reg_link)); |
| if (res) |
| res->flags = 1; |
| } |
| } |
| } |
| /* FIXME: do we need to check extend conf space? |
| I don't believe that much preset value */ |
| |
| pci_domain_read_resources(dev); |
| } |
| |
| void domain_enable_resources(device_t dev) |
| { |
| if (acpi_is_wakeup_s3()) |
| AGESAWRAPPER(fchs3laterestore); |
| |
| /* Must be called after PCI enumeration and resource allocation */ |
| if (!acpi_is_wakeup_s3()) |
| AGESAWRAPPER(amdinitmid); |
| |
| printk(BIOS_DEBUG, " ader - leaving domain_enable_resources.\n"); |
| } |
| |
| #if CONFIG_HW_MEM_HOLE_SIZEK != 0 |
| struct hw_mem_hole_info { |
| unsigned int hole_startk; |
| int node_id; |
| }; |
| |
| static struct hw_mem_hole_info get_hw_mem_hole_info(void) |
| { |
| struct hw_mem_hole_info mem_hole; |
| mem_hole.hole_startk = CONFIG_HW_MEM_HOLE_SIZEK; |
| mem_hole.node_id = -1; |
| dram_base_mask_t d; |
| u32 hole; |
| d = get_dram_base_mask(); |
| hole = pci_read_config32(dev_find_slot(0, ADDR_DEVFN), 0xf0); |
| if (hole & 2) { |
| /* We found the hole */ |
| mem_hole.hole_startk = (hole & (0xff << 24)) >> 10; |
| mem_hole.node_id = 0; /* record the node # with hole */ |
| } |
| |
| return mem_hole; |
| } |
| #endif |
| |
| void domain_set_resources(device_t dev) |
| { |
| unsigned long mmio_basek; |
| u32 pci_tolm; |
| int idx; |
| struct bus *link; |
| #if CONFIG_HW_MEM_HOLE_SIZEK != 0 |
| struct hw_mem_hole_info mem_hole; |
| u32 reset_memhole = 1; |
| #endif |
| |
| pci_tolm = 0xffffffffUL; |
| for (link = dev->link_list ; link ; link = link->next) |
| pci_tolm = find_pci_tolm(link); |
| |
| mmio_basek = pci_tolm >> 10; |
| /* Round mmio_basek to something the processor can support */ |
| mmio_basek &= ~((1 << 6) - 1); |
| |
| /* FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M |
| * MMIO hole. If you fix this here, please fix amdk8, too. |
| */ |
| /* Round the mmio hole to 64M */ |
| mmio_basek &= ~((64 * 1024) - 1); |
| |
| #if CONFIG_HW_MEM_HOLE_SIZEK != 0 |
| /* if the hw mem hole is already set in raminit stage, here we will |
| * compare mmio_basek and hole_basek. if mmio_basek is bigger that |
| * hole_basek and will use hole_basek as mmio_basek and we don't need |
| * to reset hole. Otherwise we reset the hole to the mmio_basek |
| */ |
| |
| mem_hole = get_hw_mem_hole_info(); |
| |
| /* Use hole_basek as mmio_basek, and no need to reset hole anymore */ |
| if ((mem_hole.node_id != -1) && (mmio_basek > mem_hole.hole_startk)) { |
| mmio_basek = mem_hole.hole_startk; |
| reset_memhole = 0; |
| } |
| #endif |
| |
| idx = 0x10; |
| dram_base_mask_t d; |
| resource_t basek, limitk, sizek; /* 4 1T */ |
| |
| d = get_dram_base_mask(); |
| |
| if ((d.mask & 1)) { /* if enabled... */ |
| /* could overflow, we may lose 6 bit here */ |
| basek = ((resource_t)(d.base & 0x1fffff00)) << 9; |
| limitk = ((resource_t)(((d.mask & ~1) + 0x000ff) |
| & 0x1fffff00)) << 9; |
| |
| sizek = limitk - basek; |
| |
| /* see if we need a hole from 0xa0000 to 0xbffff */ |
| if ((basek < ((8 * 64) + (8 * 16))) && (sizek > ((8 * 64) + |
| (16 * 16)))) { |
| ram_resource(dev, idx, basek, |
| ((8 * 64) + (8 * 16)) - basek); |
| idx += 0x10; |
| basek = (8 * 64) + (16 * 16); |
| sizek = limitk - ((8 * 64) + (16 * 16)); |
| |
| } |
| |
| /* split the region to accommodate pci memory space */ |
| if ((basek < 4 * 1024 * 1024) && (limitk > mmio_basek)) { |
| if (basek <= mmio_basek) { |
| unsigned int pre_sizek; |
| pre_sizek = mmio_basek - basek; |
| if (pre_sizek > 0) { |
| ram_resource(dev, idx, basek, |
| pre_sizek); |
| idx += 0x10; |
| sizek -= pre_sizek; |
| } |
| basek = mmio_basek; |
| } |
| if ((basek + sizek) <= 4 * 1024 * 1024) { |
| sizek = 0; |
| } else { |
| uint64_t topmem2 = bsp_topmem2(); |
| basek = 4 * 1024 * 1024; |
| sizek = topmem2 / 1024 - basek; |
| } |
| } |
| |
| ram_resource(dev, idx, basek, sizek); |
| printk(BIOS_DEBUG, "node 0: mmio_basek=%08lx, basek=%08llx," |
| " limitk=%08llx\n", mmio_basek, basek, limitk); |
| } |
| |
| add_uma_resource_below_tolm(dev, 7); |
| |
| for (link = dev->link_list ; link ; link = link->next) |
| if (link->children) |
| assign_resources(link); |
| |
| /* |
| * Reserve everything between A segment and 1MB: |
| * |
| * 0xa0000 - 0xbffff: legacy VGA |
| * 0xc0000 - 0xfffff: RAM |
| */ |
| mmio_resource(dev, 0xa0000, 0xa0000 / KiB, 0x20000 / KiB); |
| reserved_ram_resource(dev, 0xc0000, 0xc0000 / KiB, 0x40000 / KiB); |
| } |
| |
| void cpu_bus_scan(device_t dev) |
| { |
| struct bus *cpu_bus; |
| device_t cpu; |
| device_t cdb_dev; |
| device_t dev_mc; |
| int j; |
| int core_max; |
| int core_nums; |
| int siblings; |
| int family; |
| int enable_node; |
| u32 lapicid_start; |
| u32 apic_id; |
| u32 pccount; |
| |
| |
| dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); |
| if (!dev_mc) { |
| printk(BIOS_ERR, "%02x:%02x.0 not found", CONFIG_CBB, |
| CONFIG_CDB); |
| die(""); |
| } |
| |
| /* Get max and actual number of cores */ |
| pccount = cpuid_ecx(0x80000008); |
| core_max = 1 << ((pccount >> 12) & 0xf); |
| core_nums = (pccount & 0xF); |
| |
| family = (cpuid_eax(1) >> 20) & 0xff; |
| |
| cdb_dev = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 5)); |
| siblings = pci_read_config32(cdb_dev, 0x84) & 0xff; |
| |
| printk(BIOS_SPEW, "%s family%xh, core_max=%d, core_nums=%d," |
| " siblings=%d\n", dev_path(cdb_dev), 0x0f + family, |
| core_max, core_nums, siblings); |
| |
| /* |
| * APIC ID calucation is tightly coupled with AGESA v5 code. |
| * This calculation MUST match the assignment calculation done |
| * in LocalApicInitializationAtEarly() function. |
| * And reference GetLocalApicIdForCore() |
| * |
| * Apply apic enumeration rules |
| * For systems with >= 16 APICs, put the IO-APICs at 0..n and |
| * put the local-APICs at m..z |
| * |
| * This is needed because many IO-APIC devices only have 4 bits |
| * for their APIC id and therefore must reside at 0..15 |
| */ |
| |
| /* |
| * While the above statement is true, we know some things about |
| * this silicon. It is an SOC and can't have >= 16 APICs, but |
| * we will start numbering at 0x10. We also know there is only |
| * on physical node (module in AMD speak). |
| */ |
| |
| lapicid_start = 0x10; /* Get this from devicetree? see comment above. */ |
| enable_node = cdb_dev->enabled; |
| cpu_bus = dev->link_list; |
| |
| for (j = 0 ; j <= siblings ; j++) { |
| apic_id = lapicid_start + j; |
| printk(BIOS_SPEW, "lapicid_start 0x%x, core 0x%x," |
| " apicid=0x%x\n", lapicid_start, j, apic_id); |
| |
| cpu = add_cpu_device(cpu_bus, apic_id, enable_node); |
| if (cpu) |
| amd_cpu_topology(cpu, 1, j); |
| } |
| } |
| |
| /********************************************************************* |
| * Change the vendor / device IDs to match the generic VBIOS header. * |
| *********************************************************************/ |
| u32 map_oprom_vendev(u32 vendev) |
| { |
| u32 new_vendev; |
| new_vendev = |
| ((vendev >= 0x100298e0) && (vendev <= 0x100298ef)) ? |
| 0x100298e0 : vendev; |
| |
| if (vendev != new_vendev) |
| printk(BIOS_NOTICE, "Mapping PCI device %8x to %8x\n", |
| vendev, new_vendev); |
| |
| return new_vendev; |
| } |