| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ops.h> |
| #include <device/pciexp.h> |
| #include <device/pci_ids.h> |
| #include <southbridge/intel/common/pciehp.h> |
| #include <assert.h> |
| |
| #include "chip.h" |
| #include "pch.h" |
| |
| static const char *pch_pcie_acpi_name(const struct device *dev) |
| { |
| ASSERT(dev); |
| |
| if (PCI_SLOT(dev->path.pci.devfn) == 0x1c) { |
| static const char *names[] = { "RP01", |
| "RP02", |
| "RP03", |
| "RP04", |
| "RP05", |
| "RP06", |
| "RP07", |
| "RP08"}; |
| |
| return names[PCI_FUNC(dev->path.pci.devfn)]; |
| } |
| |
| return NULL; |
| } |
| |
| static void pch_pcie_pm_early(struct device *dev) |
| { |
| u16 link_width_p0, link_width_p4; |
| u8 slot_power_limit = 10; /* 10W for x1 */ |
| u32 reg32; |
| u8 reg8; |
| |
| reg32 = RCBA32(RPC); |
| |
| /* Port 0-3 link aggregation from PCIEPCS1[1:0] soft strap */ |
| switch (reg32 & 3) { |
| case 3: |
| link_width_p0 = 4; |
| break; |
| case 1: |
| case 2: |
| link_width_p0 = 2; |
| break; |
| case 0: |
| default: |
| link_width_p0 = 1; |
| } |
| |
| /* Port 4-7 link aggregation from PCIEPCS2[1:0] soft strap */ |
| switch ((reg32 >> 2) & 3) { |
| case 3: |
| link_width_p4 = 4; |
| break; |
| case 1: |
| case 2: |
| link_width_p4 = 2; |
| break; |
| case 0: |
| default: |
| link_width_p4 = 1; |
| } |
| |
| /* Enable dynamic clock gating where needed */ |
| reg8 = pci_read_config8(dev, 0xe1); |
| switch (PCI_FUNC(dev->path.pci.devfn)) { |
| case 0: /* Port 0 */ |
| if (link_width_p0 == 4) |
| slot_power_limit = 40; /* 40W for x4 */ |
| else if (link_width_p0 == 2) |
| slot_power_limit = 20; /* 20W for x2 */ |
| reg8 |= 0x3f; |
| break; |
| case 4: /* Port 4 */ |
| if (link_width_p4 == 4) |
| slot_power_limit = 40; /* 40W for x4 */ |
| else if (link_width_p4 == 2) |
| slot_power_limit = 20; /* 20W for x2 */ |
| reg8 |= 0x3f; |
| break; |
| case 1: /* Port 1 only if Port 0 is x1 */ |
| if (link_width_p0 == 1) |
| reg8 |= 0x3; |
| break; |
| case 2: /* Port 2 only if Port 0 is x1 or x2 */ |
| case 3: /* Port 3 only if Port 0 is x1 or x2 */ |
| if (link_width_p0 <= 2) |
| reg8 |= 0x3; |
| break; |
| case 5: /* Port 5 only if Port 4 is x1 */ |
| if (link_width_p4 == 1) |
| reg8 |= 0x3; |
| break; |
| case 6: /* Port 7 only if Port 4 is x1 or x2 */ |
| case 7: /* Port 7 only if Port 4 is x1 or x2 */ |
| if (link_width_p4 <= 2) |
| reg8 |= 0x3; |
| break; |
| } |
| pci_write_config8(dev, 0xe1, reg8); |
| |
| /* Set 0xE8[0] = 1 */ |
| pci_or_config32(dev, 0xe8, 1); |
| |
| /* Adjust Common Clock exit latency */ |
| reg32 = pci_read_config32(dev, 0xd8); |
| reg32 &= ~(1 << 17); |
| reg32 |= (1 << 16) | (1 << 15); |
| reg32 &= ~(1 << 31); /* Disable PME# SCI for native PME handling */ |
| pci_write_config32(dev, 0xd8, reg32); |
| |
| /* Adjust ASPM L1 exit latency */ |
| reg32 = pci_read_config32(dev, 0x4c); |
| reg32 &= ~((1 << 17) | (1 << 16) | (1 << 15)); |
| if (RCBA32(CIR9) & (1 << 16)) { |
| /* If RCBA+2320[15]=1 set ASPM L1 to 8-16us */ |
| reg32 |= (1 << 17); |
| } else { |
| /* Else set ASPM L1 to 2-4us */ |
| reg32 |= (1 << 16); |
| } |
| pci_write_config32(dev, 0x4c, reg32); |
| |
| /* Set slot power limit as configured above */ |
| reg32 = pci_read_config32(dev, 0x54); |
| reg32 &= ~((1 << 15) | (1 << 16)); /* 16:15 = Slot power scale */ |
| reg32 &= ~(0xff << 7); /* 14:7 = Slot power limit */ |
| reg32 |= (slot_power_limit << 7); |
| pci_write_config32(dev, 0x54, reg32); |
| } |
| |
| static void pch_pcie_pm_late(struct device *dev) |
| { |
| struct southbridge_intel_bd82x6x_config *config = dev->chip_info; |
| enum aspm_type apmc = 0; |
| |
| /* Set 0x314 = 0x743a361b */ |
| pci_write_config32(dev, 0x314, 0x743a361b); |
| |
| /* Set 0x318[31:16] = 0x1414 */ |
| pci_update_config32(dev, 0x318, 0x0000ffff, 0x14140000); |
| |
| /* Set 0x324[5] = 1 */ |
| pci_or_config32(dev, 0x324, 1 << 5); |
| |
| /* Set 0x330[7:0] = 0x40 */ |
| pci_update_config32(dev, 0x330, ~0xff, 0x40); |
| |
| /* Set 0x33C[24:0] = 0x854c74 */ |
| pci_update_config32(dev, 0x33c, 0xff000000, 0x00854c74); |
| |
| /* No IO-APIC, Disable EOI forwarding */ |
| pci_or_config32(dev, 0xd4, 1 << 1); |
| |
| /* Check for a rootport ASPM override */ |
| switch (PCI_FUNC(dev->path.pci.devfn)) { |
| case 0: |
| apmc = config->pcie_aspm_f0; |
| break; |
| case 1: |
| apmc = config->pcie_aspm_f1; |
| break; |
| case 2: |
| apmc = config->pcie_aspm_f2; |
| break; |
| case 3: |
| apmc = config->pcie_aspm_f3; |
| break; |
| case 4: |
| apmc = config->pcie_aspm_f4; |
| break; |
| case 5: |
| apmc = config->pcie_aspm_f5; |
| break; |
| case 6: |
| apmc = config->pcie_aspm_f6; |
| break; |
| case 7: |
| apmc = config->pcie_aspm_f7; |
| break; |
| } |
| |
| /* Setup the override or get the real ASPM setting */ |
| if (apmc) { |
| pci_or_config32(dev, 0xd4, (apmc << 2) | (1 << 4)); |
| |
| } else { |
| apmc = pci_read_config32(dev, 0x50) & 3; |
| } |
| |
| /* If both L0s and L1 enabled then set root port 0xE8[1]=1 */ |
| if (apmc == PCIE_ASPM_BOTH) |
| pci_or_config32(dev, 0xe8, 1 << 1); |
| } |
| |
| static void pci_init(struct device *dev) |
| { |
| u16 reg16; |
| struct southbridge_intel_bd82x6x_config *config = dev->chip_info; |
| |
| printk(BIOS_DEBUG, "Initializing PCH PCIe bridge.\n"); |
| |
| /* Enable Bus Master */ |
| pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER); |
| |
| /* Set Cache Line Size to 0x10 */ |
| // This has no effect but the OS might expect it |
| pci_write_config8(dev, 0x0c, 0x10); |
| |
| pci_update_config16(dev, PCI_BRIDGE_CONTROL, |
| ~PCI_BRIDGE_CTL_PARITY, PCI_BRIDGE_CTL_NO_ISA); |
| |
| #ifdef EVEN_MORE_DEBUG |
| u32 reg32; |
| reg32 = pci_read_config32(dev, 0x20); |
| printk(BIOS_SPEW, " MBL = 0x%08x\n", reg32); |
| reg32 = pci_read_config32(dev, 0x24); |
| printk(BIOS_SPEW, " PMBL = 0x%08x\n", reg32); |
| reg32 = pci_read_config32(dev, 0x28); |
| printk(BIOS_SPEW, " PMBU32 = 0x%08x\n", reg32); |
| reg32 = pci_read_config32(dev, 0x2c); |
| printk(BIOS_SPEW, " PMLU32 = 0x%08x\n", reg32); |
| #endif |
| |
| /* Clear errors in status registers. FIXME: Do something? */ |
| reg16 = pci_read_config16(dev, 0x06); |
| //reg16 |= 0xf900; |
| pci_write_config16(dev, 0x06, reg16); |
| |
| reg16 = pci_read_config16(dev, 0x1e); |
| //reg16 |= 0xf900; |
| pci_write_config16(dev, 0x1e, reg16); |
| |
| /* Enable expresscard hotplug events. */ |
| if (config->pcie_hotplug_map[PCI_FUNC(dev->path.pci.devfn)]) { |
| pci_or_config32(dev, 0xd8, 1 << 30); |
| pci_write_config16(dev, 0x42, 0x142); |
| } |
| } |
| |
| static void pch_pcie_enable(struct device *dev) |
| { |
| /* Power Management init before enumeration */ |
| pch_pcie_pm_early(dev); |
| } |
| |
| static void pch_pciexp_scan_bridge(struct device *dev) |
| { |
| struct southbridge_intel_bd82x6x_config *config = dev->chip_info; |
| |
| /* Normal PCIe Scan */ |
| pciexp_scan_bridge(dev); |
| |
| if (config->pcie_hotplug_map[PCI_FUNC(dev->path.pci.devfn)]) { |
| intel_acpi_pcie_hotplug_scan_slot(dev->link_list); |
| } |
| |
| /* Late Power Management init after bridge device enumeration */ |
| pch_pcie_pm_late(dev); |
| } |
| |
| static struct device_operations device_ops = { |
| .read_resources = pci_bus_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_bus_enable_resources, |
| .init = pci_init, |
| .enable = pch_pcie_enable, |
| .scan_bus = pch_pciexp_scan_bridge, |
| .acpi_name = pch_pcie_acpi_name, |
| .ops_pci = &pci_dev_ops_pci, |
| }; |
| |
| static const unsigned short pci_device_ids[] = { 0x1c10, 0x1c12, 0x1c14, 0x1c16, |
| 0x1c18, 0x1c1a, 0x1c1c, 0x1c1e, |
| 0x1e10, 0x1e12, 0x1e14, 0x1e16, |
| 0x1e18, 0x1e1a, 0x1e1c, 0x1e1e, |
| 0 }; |
| |
| static const struct pci_driver pch_pcie __pci_driver = { |
| .ops = &device_ops, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .devices = pci_device_ids, |
| }; |