| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| /* |
| * Driver for SST serial flashes |
| */ |
| |
| #include <console/console.h> |
| #include <commonlib/helpers.h> |
| #include <spi_flash.h> |
| #include <spi-generic.h> |
| |
| #include "spi_flash_internal.h" |
| |
| #define CMD_SST_WREN 0x06 /* Write Enable */ |
| #define CMD_SST_WRDI 0x04 /* Write Disable */ |
| #define CMD_SST_RDSR 0x05 /* Read Status Register */ |
| #define CMD_SST_WRSR 0x01 /* Write Status Register */ |
| #define CMD_SST_EWSR 0x50 /* Enable Write Status Register */ |
| #define CMD_SST_READ 0x03 /* Read Data Bytes */ |
| #define CMD_SST_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */ |
| #define CMD_SST_BP 0x02 /* Byte Program */ |
| #define CMD_SST_PP 0x02 /* Page Program */ |
| #define CMD_SST_AAI_WP 0xAD /* Auto Address Increment Word Program */ |
| #define CMD_SST_SE 0x20 /* Sector Erase */ |
| |
| #define SST_SR_WIP (1 << 0) /* Write-in-Progress */ |
| #define SST_SR_WEL (1 << 1) /* Write enable */ |
| #define SST_SR_BP0 (1 << 2) /* Block Protection 0 */ |
| #define SST_SR_BP1 (1 << 3) /* Block Protection 1 */ |
| #define SST_SR_BP2 (1 << 4) /* Block Protection 2 */ |
| #define SST_SR_AAI (1 << 6) /* Addressing mode */ |
| #define SST_SR_BPL (1 << 7) /* BP bits lock */ |
| |
| static const struct spi_flash_part_id flash_table_ai[] = { |
| { |
| /* SST25VF040B */ |
| .id[0] = 0x8d, |
| .nr_sectors_shift = 7, |
| },{ |
| /* SST25VF080B */ |
| .id[0] = 0x8e, |
| .nr_sectors_shift = 8, |
| },{ |
| /* SST25VF080 */ |
| .id[0] = 0x80, |
| .nr_sectors_shift = 8, |
| },{ |
| /* SST25VF016B */ |
| .id[0] = 0x41, |
| .nr_sectors_shift = 9, |
| },{ |
| /* SST25VF032B */ |
| .id[0] = 0x4a, |
| .nr_sectors_shift = 10, |
| },{ |
| /* SST25WF512 */ |
| .id[0] = 0x01, |
| .nr_sectors_shift = 4, |
| },{ |
| /* SST25WF010 */ |
| .id[0] = 0x02, |
| .nr_sectors_shift = 5, |
| },{ |
| /* SST25WF020 */ |
| .id[0] = 0x03, |
| .nr_sectors_shift = 6, |
| },{ |
| /* SST25WF040 */ |
| .id[0] = 0x04, |
| .nr_sectors_shift = 7, |
| },{ |
| /* SST25WF080 */ |
| .id[0] = 0x05, |
| .nr_sectors_shift = 8, |
| },{ |
| /* SST25WF080B */ |
| .id[0] = 0x14, |
| .nr_sectors_shift = 8, |
| }, |
| }; |
| |
| static const struct spi_flash_part_id flash_table_pp256[] = { |
| { |
| /* SST25VF064C */ |
| .id[0] = 0x4b, |
| .nr_sectors_shift = 11, |
| }, |
| }; |
| |
| static int |
| sst_enable_writing(const struct spi_flash *flash) |
| { |
| int ret = spi_flash_cmd(&flash->spi, CMD_SST_WREN, NULL, 0); |
| if (ret) |
| printk(BIOS_WARNING, "SF: Enabling Write failed\n"); |
| return ret; |
| } |
| |
| static int |
| sst_enable_writing_status(const struct spi_flash *flash) |
| { |
| int ret = spi_flash_cmd(&flash->spi, CMD_SST_EWSR, NULL, 0); |
| if (ret) |
| printk(BIOS_WARNING, "SF: Enabling Write Status failed\n"); |
| return ret; |
| } |
| |
| static int |
| sst_disable_writing(const struct spi_flash *flash) |
| { |
| int ret = spi_flash_cmd(&flash->spi, CMD_SST_WRDI, NULL, 0); |
| if (ret) |
| printk(BIOS_WARNING, "SF: Disabling Write failed\n"); |
| return ret; |
| } |
| |
| static int |
| sst_byte_write(const struct spi_flash *flash, u32 offset, const void *buf) |
| { |
| int ret; |
| u8 cmd[4] = { |
| CMD_SST_BP, |
| offset >> 16, |
| offset >> 8, |
| offset, |
| }; |
| |
| #if CONFIG(DEBUG_SPI_FLASH) |
| printk(BIOS_SPEW, "BP[%02x]: %p => cmd = { 0x%02x 0x%06x }\n", |
| spi_w8r8(&flash->spi, CMD_SST_RDSR), buf, cmd[0], offset); |
| #endif |
| |
| ret = sst_enable_writing(flash); |
| if (ret) |
| return ret; |
| |
| ret = spi_flash_cmd_write(&flash->spi, cmd, sizeof(cmd), buf, 1); |
| if (ret) |
| return ret; |
| |
| return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT_MS); |
| } |
| |
| static int sst_write_ai(const struct spi_flash *flash, u32 offset, size_t len, |
| const void *buf) |
| { |
| size_t actual, cmd_len; |
| int ret = 0; |
| u8 cmd[4]; |
| |
| /* If the data is not word aligned, write out leading single byte */ |
| actual = offset % 2; |
| if (actual) { |
| ret = sst_byte_write(flash, offset, buf); |
| if (ret) |
| goto done; |
| } |
| offset += actual; |
| |
| ret = sst_enable_writing(flash); |
| if (ret) |
| goto done; |
| |
| cmd_len = 4; |
| cmd[0] = CMD_SST_AAI_WP; |
| cmd[1] = offset >> 16; |
| cmd[2] = offset >> 8; |
| cmd[3] = offset; |
| |
| for (; actual < len - 1; actual += 2) { |
| #if CONFIG(DEBUG_SPI_FLASH) |
| printk(BIOS_SPEW, "WP[%02x]: %p => cmd = { 0x%02x 0x%06x }\n", |
| spi_w8r8(&flash->spi, CMD_SST_RDSR), buf + actual, cmd[0], |
| offset); |
| #endif |
| |
| ret = spi_flash_cmd_write(&flash->spi, cmd, cmd_len, |
| buf + actual, 2); |
| if (ret) { |
| printk(BIOS_WARNING, "SF: SST word program failed\n"); |
| break; |
| } |
| |
| ret = spi_flash_cmd_wait_ready(flash, |
| SPI_FLASH_PROG_TIMEOUT_MS); |
| if (ret) |
| break; |
| |
| cmd_len = 1; |
| offset += 2; |
| } |
| |
| if (!ret) |
| ret = sst_disable_writing(flash); |
| |
| /* If there is a single trailing byte, write it out */ |
| if (!ret && actual != len) |
| ret = sst_byte_write(flash, offset, buf + actual); |
| |
| done: |
| #if CONFIG(DEBUG_SPI_FLASH) |
| printk(BIOS_SPEW, "SF: SST: program %s %zu bytes @ 0x%lx\n", |
| ret ? "failure" : "success", len, (unsigned long)offset - actual); |
| #endif |
| return ret; |
| } |
| |
| /* Flash powers up read-only, so clear BP# bits */ |
| static int sst_unlock(const struct spi_flash *flash) |
| { |
| int ret; |
| u8 cmd, status; |
| |
| ret = sst_enable_writing_status(flash); |
| if (ret) |
| return ret; |
| |
| cmd = CMD_SST_WRSR; |
| status = 0; |
| ret = spi_flash_cmd_write(&flash->spi, &cmd, 1, &status, 1); |
| if (ret) |
| printk(BIOS_WARNING, "SF: Unable to set status byte\n"); |
| |
| printk(BIOS_INFO, "SF: SST: status = %x\n", spi_w8r8(&flash->spi, CMD_SST_RDSR)); |
| |
| return ret; |
| } |
| |
| static const struct spi_flash_ops_descriptor descai = { |
| .erase_cmd = CMD_SST_SE, |
| .status_cmd = CMD_SST_RDSR, |
| .wren_cmd = CMD_SST_WREN, |
| .ops = { |
| .read = spi_flash_cmd_read, |
| .write = sst_write_ai, |
| .erase = spi_flash_cmd_erase, |
| .status = spi_flash_cmd_status, |
| }, |
| }; |
| |
| const struct spi_flash_vendor_info spi_flash_sst_ai_vi = { |
| .id = VENDOR_ID_SST, |
| .sector_size_kib_shift = 2, |
| .match_id_mask[0] = 0xff, |
| .ids = flash_table_ai, |
| .nr_part_ids = ARRAY_SIZE(flash_table_ai), |
| .desc = &descai, |
| .after_probe = sst_unlock, |
| }; |
| |
| const struct spi_flash_vendor_info spi_flash_sst_vi = { |
| .id = VENDOR_ID_SST, |
| .page_size_shift = 8, |
| .sector_size_kib_shift = 2, |
| .match_id_mask[0] = 0xff, |
| .ids = flash_table_pp256, |
| .nr_part_ids = ARRAY_SIZE(flash_table_pp256), |
| .desc = &spi_flash_pp_0x20_sector_desc, |
| .after_probe = sst_unlock, |
| }; |