| chip soc/intel/cannonlake |
| register "common_soc_config" = "{ |
| // Touchpad I2C bus |
| .i2c[0] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 80, |
| .fall_time_ns = 110, |
| }, |
| }" |
| |
| # CPU (soc/intel/cannonlake/cpu.c) |
| # Power limit |
| register "power_limits_config" = "{ |
| .tdp_pl1_override = 45, |
| .tdp_pl2_override = 78, |
| }" |
| |
| # Enable Enhanced Intel SpeedStep |
| register "eist_enable" = "1" |
| |
| # FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c) |
| register "enable_c6dram" = "1" |
| |
| # FSP Silicon (soc/intel/cannonlake/fsp_params.c) |
| # Serial I/O |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, // Touchpad I2C bus |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexUART2] = PchSerialIoPci, // Debug console |
| }" |
| |
| # Misc |
| register "AcousticNoiseMitigation" = "1" |
| |
| # Power |
| register "PchPmSlpS3MinAssert" = "3" # 50ms |
| register "PchPmSlpS4MinAssert" = "1" # 1s |
| register "PchPmSlpSusMinAssert" = "4" # 4s |
| register "PchPmSlpAMinAssert" = "4" # 2s |
| |
| # Thermal |
| register "tcc_offset" = "13" |
| |
| # Serial IRQ Continuous |
| register "serirq_mode" = "SERIRQ_CONTINUOUS" |
| |
| # PM Util (soc/intel/cannonlake/pmutil.c) |
| # GPE configuration |
| # Note that GPE events called out in ASL code rely on this |
| # route. i.e. If this route changes then the affected GPE |
| # offset bits also need to be changed. |
| register "gpe0_dw0" = "PMC_GPP_B" |
| register "gpe0_dw1" = "PMC_GPP_G" |
| register "gpe0_dw2" = "PMC_GPP_E" |
| |
| # Actual device tree |
| device cpu_cluster 0 on |
| device lapic 0 on end |
| end |
| |
| device domain 0 on |
| subsystemid 0x1558 0x95e6 inherit |
| device pci 00.0 on end # Host Bridge |
| device pci 01.0 on # GPU Port |
| # PCI Express Graphics #0 x16, Clock 8 (NVIDIA GPU) |
| register "PcieClkSrcUsage[8]" = "0x40" |
| register "PcieClkSrcClkReq[8]" = "8" |
| end |
| device pci 02.0 on # Integrated Graphics Device |
| register "gfx" = "GMA_DEFAULT_PANEL(0)" |
| end |
| device pci 04.0 on # SA Thermal device |
| register "Device4Enable" = "1" |
| end |
| device pci 12.0 on end # Thermal Subsystem |
| device pci 12.5 off end # UFS SCS |
| device pci 12.6 off end # GSPI #2 |
| device pci 13.0 off end # Integrated Sensor Hub |
| device pci 14.0 on # USB xHCI |
| # USB2 |
| register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C |
| register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C/DP |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # USB 3 Right |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # USB 3 Left |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Per-key RGB |
| register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # 3G/LTE |
| register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Camera |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint |
| register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" # WLAN/Bluetooth |
| # USB3 |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C/DP |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3 Right |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3 Left |
| register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)" # 3G/LTE |
| end |
| device pci 14.1 off end # USB xDCI (OTG) |
| device pci 14.2 on end # Shared SRAM |
| device pci 14.3 on # CNVi wifi |
| #chip drivers/intel/wifi |
| # register "wake" = "PME_B0_EN_BIT" |
| #end |
| end |
| device pci 14.5 off end # SDCard |
| device pci 15.0 on # I2C #0 |
| # I2C HID not supported on PNP0f13 |
| end |
| device pci 15.1 on end # I2C #1 |
| device pci 15.2 off end # I2C #2 |
| device pci 15.3 off end # I2C #3 |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT Redirection |
| device pci 16.4 off end # Management Engine Interface 3 |
| device pci 16.5 off end # Management Engine Interface 4 |
| device pci 17.0 on # SATA |
| register "SataPortsEnable[1]" = "1" # SSD (SATA1A) |
| register "SataPortsEnable[4]" = "1" # HDD (SATA4) |
| end |
| device pci 19.0 off end # I2C #4 |
| device pci 19.1 off end # I2C #5 |
| device pci 19.2 on end # UART #2 |
| device pci 1a.0 off end # eMMC |
| device pci 1b.0 off end # PCI Express Port 17 |
| device pci 1b.1 off end # PCI Express Port 18 |
| device pci 1b.2 off end # PCI Express Port 19 |
| device pci 1b.3 off end # PCI Express Port 20 |
| device pci 1b.4 on # PCI Express Port 21 |
| # PCI Express root port #21 x4, Clock 11 (SSD2) |
| register "PcieRpEnable[20]" = "1" |
| register "PcieRpLtrEnable[20]" = "1" |
| register "PcieClkSrcUsage[11]" = "20" |
| register "PcieClkSrcClkReq[11]" = "11" |
| end |
| device pci 1b.5 off end # PCI Express Port 22 |
| device pci 1b.6 off end # PCI Express Port 23 |
| device pci 1b.7 off end # PCI Express Port 24 |
| device pci 1c.0 off end # PCI Express Port 1 |
| device pci 1c.1 off end # PCI Express Port 2 |
| device pci 1c.2 off end # PCI Express Port 3 |
| device pci 1c.3 off end # PCI Express Port 4 |
| device pci 1c.4 off end # PCI Express Port 5 |
| device pci 1c.5 off end # PCI Express Port 6 |
| device pci 1c.6 off end # PCI Express Port 7 |
| device pci 1c.7 off end # PCI Express Port 8 |
| device pci 1d.0 on # PCI Express Port 9 |
| # PCI Express root port #9 x4, Clock 12 (SSD) |
| register "PcieRpEnable[8]" = "1" |
| register "PcieRpLtrEnable[8]" = "1" |
| register "PcieClkSrcUsage[12]" = "8" |
| register "PcieClkSrcClkReq[12]" = "12" |
| end |
| device pci 1d.1 off end # PCI Express Port 10 |
| device pci 1d.2 off end # PCI Express Port 11 |
| device pci 1d.3 off end # PCI Express Port 12 |
| device pci 1d.4 off end # PCI Express Port 13 |
| device pci 1d.5 on # PCI Express Port 14 |
| # PCI Express root port #14 x1, Clock 13 (WLAN) |
| register "PcieRpEnable[13]" = "1" |
| register "PcieRpLtrEnable[13]" = "1" |
| register "PcieClkSrcUsage[13]" = "13" |
| register "PcieClkSrcClkReq[13]" = "13" |
| end |
| device pci 1d.6 on # PCI Express Port 15 |
| # PCI Express root port #15 x1, Clock 14 (GLAN) |
| register "PcieRpEnable[14]" = "1" |
| register "PcieRpLtrEnable[14]" = "1" |
| register "PcieClkSrcUsage[14]" = "14" |
| register "PcieClkSrcClkReq[14]" = "14" |
| end |
| device pci 1d.7 on # PCI Express Port 16 |
| # PCI Express root port #16 x1, Clock 15 (Card Reader) |
| register "PcieRpEnable[15]" = "1" |
| register "PcieRpLtrEnable[15]" = "1" |
| register "PcieClkSrcUsage[15]" = "15" |
| register "PcieClkSrcClkReq[15]" = "15" |
| end |
| device pci 1e.0 off end # UART #0 |
| device pci 1e.1 off end # UART #1 |
| device pci 1e.2 off end # GSPI #0 |
| device pci 1e.3 off end # GSPI #1 |
| device pci 1f.0 on # LPC Interface |
| register "gen1_dec" = "0x00040069" |
| register "gen2_dec" = "0x00fc0e01" |
| register "gen3_dec" = "0x00fc0f01" |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| end |
| device pci 1f.1 off end # P2SB |
| device pci 1f.2 hidden end # Power Management Controller |
| device pci 1f.3 on # Intel HDA |
| subsystemid 0x1558 0x96e1 |
| register "PchHdaAudioLinkHda" = "1" |
| end |
| device pci 1f.4 on # SMBus |
| chip drivers/i2c/tas5825m |
| register "id" = "0" |
| device i2c 4e on end # (8bit address: 0x9c) |
| end # tas5825m |
| end |
| device pci 1f.5 on end # PCH SPI |
| device pci 1f.6 off end # GbE |
| end |
| end |