| # SPDX-License-Identifier: GPL-2.0-or-later |
| |
| chip northbridge/intel/sandybridge |
| register "gpu_cpu_backlight" = "0x0000040e" |
| register "gpu_panel_power_backlight_off_delay" = "2000" |
| register "gpu_pch_backlight" = "0x0d9c0d9c" |
| device domain 0 on |
| subsystemid 0x103c 0x1815 inherit |
| |
| device ref peg10 off end |
| device ref igd on end |
| |
| chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH |
| # mailbox at 0x200/0x201 and PM1 at 0x220 |
| register "gen1_dec" = "0x007c0201" |
| register "gen2_dec" = "0x000c0101" |
| register "gen3_dec" = "0x00fcfe01" |
| register "gen4_dec" = "0x000402e9" |
| register "gpi6_routing" = "2" |
| register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }" |
| # HDD(0), ODD(1), mSATA(2), eSATA(4) |
| register "sata_port_map" = "0x3f" |
| register "superspeed_capable_ports" = "0x0000000f" |
| register "xhci_overcurrent_mapping" = "0x00000c03" |
| register "xhci_switchable_ports" = "0x0000000f" |
| register "usb_port_config" = "{ |
| {1, 1, 0}, /* SSP1: dock */ |
| {1, 1, 0}, /* SSP2: left, EHCI Debug */ |
| {0, 1, 1}, /* SSP3 */ |
| {1, 1, 1}, /* SSP4: right */ |
| {0, 0, 2}, /* B0P5 */ |
| {0, 0, 2}, /* B0P6 */ |
| {0, 0, 3}, /* B0P7 */ |
| {1, 0, 3}, /* B0P8: smart card reader */ |
| {1, 0, 4}, /* B1P1: fingerprint reader */ |
| {1, 0, 4}, /* B1P2: (EHCI Debug) wlan usb */ |
| {1, 1, 5}, /* B1P3: Camera */ |
| {1, 0, 5}, /* B1P4 */ |
| {1, 0, 6}, /* B1P5: wwan USB */ |
| {0, 0, 6} |
| }" |
| |
| device ref xhci on end |
| device ref mei1 on end |
| device ref pcie_rp1 on end |
| device ref pcie_rp2 off end |
| device ref pcie_rp3 on end # SD/MMC |
| device ref pcie_rp4 on # WLAN |
| smbios_slot_desc "SlotTypePciExpressMini52pinWithoutBSKO" |
| "SlotLengthShort" "Mini PCIe" "SlotDataBusWidth1X" |
| end |
| device ref pcie_rp5 off end |
| device ref pcie_rp6 off end |
| device ref pcie_rp7 off end |
| device ref pcie_rp8 off end |
| device ref lpc on |
| chip ec/hp/kbc1126 |
| register "ec_data_port" = "0x62" |
| register "ec_cmd_port" = "0x66" |
| register "ec_ctrl_reg" = "0x81" |
| register "ec_fan_ctrl_value" = "0x70" |
| device pnp ff.1 off end |
| end |
| chip superio/smsc/lpc47n217 |
| device pnp 4e.3 on # Parallel |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| end |
| device pnp 4e.4 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 4e.5 off end # COM2 |
| end |
| end |
| end |
| end |
| end |