blob: 8ecae251f6f30259f3fb7cb75039b2e35cde97ee [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-or-later
chip northbridge/intel/sandybridge
register "gpu_dp_b_hotplug" = "4"
register "gpu_dp_c_hotplug" = "4"
register "gpu_dp_d_hotplug" = "4"
register "spd_addresses" = "{0x50, 0, 0x52, 0}"
device domain 0 on
device ref host_bridge on
subsystemid 0x1849 0x0150
end
device ref peg10 on
subsystemid 0x1849 0x0151
end
device ref igd on
subsystemid 0x1849 0x0152
end
chip southbridge/intel/bd82x6x
register "gen1_dec" = "0x000c0291"
register "gen2_dec" = "0x000c0241"
register "gen3_dec" = "0x000c0251"
register "sata_interface_speed_support" = "0x3"
register "sata_port_map" = "0x3f"
register "superspeed_capable_ports" = "0x0000000f"
register "xhci_overcurrent_mapping" = "0x00000c03"
register "xhci_switchable_ports" = "0x0000000f"
register "spi_uvscc" = "0x2005"
register "spi_lvscc" = "0x2005"
register "usb_port_config" = "{
{1, 0, 0}, {1, 0, 0}, {1, 1, 1}, {1, 1, 1},
{1, 1, 2}, {1, 1, 2}, {1, 0, 3}, {1, 0, 3},
{1, 0, 4}, {1, 0, 4}, {1, 0, 6},
{1, 1, 5}, {1, 1, 5}, {1, 0, 6}
}"
device ref xhci on
subsystemid 0x1849 0x1e31
end
device ref mei1 on
subsystemid 0x1849 0x1e3a
end
device ref mei2 off end
device ref me_ide_r off end
device ref me_kt off end
device ref gbe off end
device ref ehci2 on
subsystemid 0x1849 0x1e2d
end
device ref hda on
subsystemid 0x1849 0x8892
end
device ref pcie_rp1 on
subsystemid 0x1849 0x1e10
end
device ref pcie_rp2 off end
device ref pcie_rp3 off end
device ref pcie_rp4 on # Realtek PCIe GbE Controller
subsystemid 0x1849 0x1e16
device pci 00.0 on end # PCI 10ec:8168
end
device ref pcie_rp5 off end
device ref pcie_rp6 on
subsystemid 0x1849 0x1e1a
end
device ref pcie_rp7 off end
device ref pcie_rp8 off end
device ref ehci1 on
subsystemid 0x1849 0x1e26
end
device ref pci_bridge off end
device ref lpc on
subsystemid 0x1849 0x1e49
chip superio/nuvoton/nct6776
device pnp 2e.0 off end # Floppy
device pnp 2e.1 on # Parallel port
# global
irq 0x1c = 0x80
irq 0x27 = 0xc0
irq 0x2a = 0x62
# parallel port
io 0x60 = 0x378
irq 0x70 = 5
drq 0x74 = 3
end
device pnp 2e.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off end # COM2, IR
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off end # CIR
device pnp 2e.7 off end # GPIO6-9
device pnp 2e.8 off end # WDT1, GPIO0, GPIO1, GPIOA
device pnp 2e.9 off end # GPIO2-5
device pnp 2e.a on # ACPI
irq 0xe0 = 0x01
irq 0xe3 = 0x14
irq 0xe4 = 0x10 # + enable 3VSBSW#
irq 0xe6 = 0x4c
irq 0xe9 = 0x02
irq 0xf0 = 0x20 # + pin 70 = 3VSBSW
end
device pnp 2e.b on # HWM, front panel LED
irq 0x30 = 0xe1 # + Fan RPM sense pins
io 0x60 = 0x0290 # + HWM base address
io 0x62 = 0x0000
irq 0x70 = 0
end
device pnp 2e.d on end # VID
device pnp 2e.e off end # CIR WAKE-UP
device pnp 2e.f on end # GPIO Push-Pull or Open-drain
device pnp 2e.14 on end # SVID
device pnp 2e.16 on end # Deep Sleep
device pnp 2e.17 on end # GPIOA
device pnp 2e.308 on # GPIO base
io 0x60 = 0x0
end
end
end
device ref sata1 on
subsystemid 0x1849 0x1e02
end
device ref smbus on
subsystemid 0x1849 0x1e22
end
device ref sata2 off end
device ref thermal off end
end
end
end