blob: e43985c62df84f165784d0dcce39aa4849d79e16 [file] [log] [blame]
<!DOCTYPE html>
<html>
<head>
<title>Board</title>
</head>
<body>
<h1>x86 Board Development</h1>
<p>
Board development requires System-on-a-Chip (SoC) support.
The combined steps are listed
<a target="_blank" href="../x86Development.html">here</a>.
The development steps for the board are listed below:
</p>
<ol>
<li><a href="#RequiredFiles">Required Files</a></li>
</ol>
<hr>
<h1><a name="RequiredFiles">Required Files</a></h1>
<p>
Create the board directory as src/mainboard/&lt;Vendor&gt;/&lt;Board&gt;.
</p>
<p>
The following files are required to build a new board:
</p>
<ol>
<li>Kconfig.name - Defines the Kconfig value for the board</li>
<li>Kconfig
<ol type="A">
<li>Selects the SoC for the board and specifies the SPI flash size
<ol type="I">
<li>BOARD_ROMSIZE_KB_&lt;Size&gt;</li>
<li>SOC_&lt;Vendor&gt;_&lt;Chip Family&gt;</li>
</ol>
</li>
<li>Declare the Kconfig values for:
<ol type="I">
<li>MAINBOARD_DIR</li>
<li>MAINBOARD_PART_NUMBER</li>
<li>MAINBOARD_VENDOR</li>
</ol>
</li>
</ol>
</li>
<li>devicetree.cb - Enable root bridge and serial port
<ol type="A">
<li>The first line must be "chip soc/Intel/&lt;soc family&gt;";
this path is used by the generated static.c to include the chip.h
header file
</li>
</ol>
</li>
<li>romstage.c
<ol type="A">
<li>Add routine mainboard_romstage_entry which calls romstage_common</li>
</ol>
</li>
<li>Configure coreboot build:
<ol type="A">
<li>Set LOCALVERSION</li>
<li>FLASHMAP_OFFSET = 0x00700000</li>
<li>Select vendor for the board</li>
<li>Select the board</li>
<li>CBFS_SIZE = 0x00100000</li>
<li>Set the CPU_MICROCODE_CBFS_LEN</li>
<li>Set the CPU_MICROCODE_CBFS_LOC</li>
<li>Set the FSP_IMAGE_ID_STRING</li>
<li>Set the FSP_LOC</li>
<li>Disable GOP_SUPPORT</li>
<li>No payload</li>
<li>Choose the default value for all other options</li>
</ol>
</li>
</ol>
<hr>
<p>Modified: 31 January 2016</p>
</body>
</html>