| #include <device/pnp_def.h> |
| |
| #define NSC_WD_DEV PNP_DEV(0x2e, 0xa) |
| #define NSC_WDBASE 0x600 |
| #define ICH5_WDBASE 0x400 |
| #define ICH5_GPIOBASE 0x500 |
| |
| static void disable_sio_watchdog(device_t dev) |
| { |
| #if 0 |
| /* FIXME move me somewhere more appropriate */ |
| pnp_set_logical_device(dev); |
| pnp_set_enable(dev, 1); |
| pnp_set_iobase(dev, PNP_IDX_IO0, NSC_WDBASE); |
| /* disable the sio watchdog */ |
| outb(0, NSC_WDBASE + 0); |
| pnp_set_enable(dev, 0); |
| #endif |
| } |
| |
| static void disable_ich5_watchdog(void) |
| { |
| /* FIXME move me somewhere more appropriate */ |
| device_t dev; |
| unsigned long value, base; |
| dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0); |
| if (dev == PCI_DEV_INVALID) { |
| die("Missing ich5?"); |
| } |
| /* Enable I/O space */ |
| value = pci_read_config16(dev, 0x04); |
| value |= (1 << 10); |
| pci_write_config16(dev, 0x04, value); |
| |
| /* Set and enable acpibase */ |
| pci_write_config32(dev, 0x40, ICH5_WDBASE | 1); |
| pci_write_config8(dev, 0x44, 0x10); |
| base = ICH5_WDBASE + 0x60; |
| |
| /* Set bit 11 in TCO1_CNT */ |
| value = inw(base + 0x08); |
| value |= 1 << 11; |
| outw(value, base + 0x08); |
| |
| /* Clear TCO timeout status */ |
| outw(0x0008, base + 0x04); |
| outw(0x0002, base + 0x06); |
| } |
| |
| static void disable_jarell_frb3(void) |
| { |
| #if 0 |
| device_t dev; |
| unsigned long value, base; |
| dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0); |
| if (dev == PCI_DEV_INVALID) { |
| die("Missing ich5?"); |
| } |
| /* Enable I/O space */ |
| value = pci_read_config16(dev, 0x04); |
| value |= (1 << 0); |
| pci_write_config16(dev, 0x04, value); |
| |
| /* Set gpio base */ |
| pci_write_config32(dev, 0x58, ICH5_GPIOBASE | 1); |
| base = ICH5_GPIOBASE; |
| |
| /* Enable GPIO Bar */ |
| value = pci_read_config32(dev, 0x5c); |
| value |= 0x10; |
| pci_write_config32(dev, 0x5c, value); |
| |
| /* Configure GPIO 48 and 40 as GPIO */ |
| value = inl(base + 0x30); |
| value |= (1 << 16) | ( 1 << 8); |
| outl(value, base + 0x30); |
| |
| /* Configure GPIO 48 as Output */ |
| value = inl(base + 0x34); |
| value &= ~(1 << 16); |
| outl(value, base + 0x34); |
| |
| /* Toggle GPIO 48 high to low */ |
| value = inl(base + 0x38); |
| value |= (1 << 16); |
| outl(value, base + 0x38); |
| value &= ~(1 << 16); |
| outl(value, base + 0x38); |
| #endif |
| } |
| |
| static void disable_watchdogs(void) |
| { |
| // disable_sio_watchdog(NSC_WD_DEV); |
| disable_ich5_watchdog(); |
| // disable_jarell_frb3(); |
| print_debug("Watchdogs disabled\r\n"); |
| } |
| |